한국유체기계학회 논문집 (The KSFM Journal of Fluid Machinery)

한국유체기계학회 (Korean Society for Fluid machinery)
권호 표지
DOI QR코드

DOI QR Code

고효율 침전조 설계를 위한 실험 및 수치해석

Numerical and Experimental Studies for the Design of High Efficiency Sedimentation Bed

  • 김홍민 (인하대학교 기계공학과 대학원) ;
  • 최상철 (인하대학교 기계공학과 대학원) ;
  • 김광용 (인하대학교 기계공학과) ;
  • 김병희 (중앙종합기계(주) 환경기술연구소) ;
  • 임영택 (중앙종합기계(주) 환경기술연구소)
  • 발행 : 2003.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Both numerical and experimental studies on the sedimentation efficiency of a sedimentation bed were carried out. Three different structures of sedimentation bed and five different combinations of blockage ratio of center feed wall and angle of distributor are implemented to find the optimal values of geometric parameters. The effect of rotation of the distributor on sedimentation efficiency is also investigated. It reveals that the effects of blockage ratio and angle of distributor on sedimentation efficiency are considerable, while rotation effect can be neglected, and that calculated efficiencies show good agreements with those of experiment, qualitatively.

키워드

참고문헌

  1. Trans. ASCE v.53 On Sedimentation Hazen, A.
  2. proceedings American Society of Civil Engineering, Paper No. 2285 Sedimentation and the Design of Settling Tanks Camp, T. R.
  3. J. Sewage Works v.17 no.1 Design of Settling Tanks for Activated Sludge Anderson, N. E.
  4. Report No. 1001 On the Hydralics of Rectangular Settling Basins Larsen, P.
  5. Environment Canada Design and Performance Criteria for Settling Tanks for Removal of Physical-chemical Flocs Heinke, G. W.
  6. J. of Hydraulic Engineering Computing Shear Flow and Sludge Blanket in Secondary Clarifiers Djamel Lakehal;Peter Krebs;Johan Krijgman;Wolfgang Rodi
  7. Ph.D. Thesis, U. of Windsor Numerical Modeling of Rectangular Clarifiers Iman, E.
  8. Report No. SFB 210/E/40 A Study of flow in a Two-Dimensional Model Settling Basins Adams, E. W.;Stamou A. I.
  9. J. of Hydraulic Engineering v.116 no.1 Turbulence Measurements in a Model Settling Tank Lyn, D. A.;Rodi, W. https://doi.org/10.1061/(ASCE)0733-9429(1990)116:1(3)
  10. J. of Environmental Engineering v.121 no.8 Inlet-Structure Design for Final Clarifiers Kerbs, P.;Vischer, D.;Gujer, W. https://doi.org/10.1061/(ASCE)0733-9372(1995)121:8(558)
  11. ICHMT seminar The calculation of freeconvection phenomena in gas-liquid mixtures Spalding, D. B.
  12. CFX Solver manual
  13. J. of hydraulic Engineering v.116 no.7 Modeling Flow and Mixing in Sedimentation Tanks Adams, E. W.;Rodi, W. https://doi.org/10.1061/(ASCE)0733-9429(1990)116:7(895)