Abstract
The interception capabilities of storm water grate inlet were analyzed in this paper. The hydraulic model lot gutter flow was used to estimate the interception capability. With the consideration of width and length of road, gutter discharges were ranged of 4-15l/sec. The transverse slopes of gutter were selected 4, 7 and 10%. The longitudinal slopes were 0, 2, 5 and 7%. The four sizes of storm water grate inlet were used in this experiments ($30\times40cm,\;40\times50cm,\;40\times100cm,\;40\times150cm$). The total number of experimental cases were 240. As the transverse slopes of gutter increased, the interception capability also increased. As the flow width in gutter and the discharge were lower, the interception efficiencies increased and the longitudinal slopes of road increased, the interception efficiencies decreased. The empirical formula with the factors of total inflow discharge, the longitudinal slope and the transverse slope of gutter were derived. These equations could be used to estimate the intercepting discharge of grate inlet. The reasonable construction space of grate inlet for the road widths, the longitudinal slopes, the transverse slopes and the grate inlet sizes were suggested.
본 연구에서는 도로의 측구 부분을 수리모형으로 제작하여 빗물받이의 차집능력을 검토하였다. 측구의 유량은 도로의 차선(2-4차선) 및 빗물받이 간격(10-30m)을 고려하여 4-15l/sec의 유량을 사용하였고, 도로의 종방향 경사는 0, 2, 5, 7%를 선택하였으며, 측구의 횡경사는 4, 7, 10%를 사용하였다. 유입부의 규모는 $30\times40cm,\;40\times50cm,\;40\times100cm,\;40\times150cm$의 4종류를 사용하였으며, 총 실험 횟수는 240회이다. 측구의 횡경사가 클수록 전체적인 빗물받이의 차집유량은 증가하였다. 차집효율은 흐름폭과 유량이 작을 수록 증가하였고, 종방향 경사가 급할 수록 감소함을 알 수 있었다. 실험의 결과로부터 유입부 규모에 따른 차집유량을 계산할 수 있는 경험식을 제시하였다. 도로의 차선별, 종경사별, 측구의 횡경사별, 유입부 규모별로 적정 빗물받이 간격을 제시할 수 있어서 도로의 빗물받이 설계에 기초자료를 제공하였다.