The Journal of Korean Academy of Prosthodontics (대한치과보철학회지)

The Korean Academy of Prosthodonitics (대한치과보철학회)
권호 표지

SHEAR BOND STRENGTHS BETWEEN ABRASION-RESISTANT DENTURE TEETH AND COMPOSITE RESINS

의치용 레진치와 수복용 복합레진 간의 결합강도에 관한 연구

  • Kim, Mee-Lee (Department of Prosthodontics, College of Dentistry, Pusan National University) ;
  • Jeong, Chang-Mo (Department of Prosthodontics, College of Dentistry, Pusan National University) ;
  • Jeon, Young-Chan (Department of Prosthodontics, College of Dentistry, Pusan National University) ;
  • Lim, Jang-Seop (Department of Prosthodontics, College of Dentistry, Pusan National University)
  • 김미리 (부산대학교 치과대학 보철학교실) ;
  • 정창모 (부산대학교 치과대학 보철학교실) ;
  • 전영찬 (부산대학교 치과대학 보철학교실) ;
  • 임장섭 (부산대학교 치과대학 보철학교실)
  • Published : 2002.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study investigated the shear bond strengths between abrasion-resistant denture teeth and composite resins according to surface treatments. Denture teeth for this study were Trubyte IPN teeth(Dentsply Inc., USA) with interpenetrating polymer network and Endura Posterio (Shofu Inc. Japan) of composite resin teeth, and restorative composite resins were Clearfil FII (Kuraray, Japan) of the self-cured composite resin and Z100(3M Dental Product, USA) of the light-cured composite resin. Five different surface treatments were evaluated: (1) $50{\mu}m\;A1_2O_3$ sandblasting: (2) #100 carbide paper; (3) chloroform; (4) retentive holes; and (5) no treatment. After surface treatments, denture teeth were examined by scanning electron microscopy(SEM), and the maximum shear bond strengths between abrasion-resistant denture teeth and composite resins were measured using Instron. The results were as follows; 1. IPN teeth treated with sandblasting had the highest shear bond strength, and Endura treated with sandblasting and carbide paper had significantly greater shear bond strength than with any other surface treatment. 2. Regardless or composite resins, the shear bond strength on Endura was greater than on IPN teeth. 3. Regardless of denture teeth, the shear bond strength of Clearfil FII was greater han of Z100. 4. In appearance of SEM, IPN teeth treated with sandblasting showed generalized roughness on the all of surface, however, carbide paper treatment resulted in partly rough. Endura treated with sandblasting and carbide paper showed similar surface characteristics. Wetting denture teeth surface with chloroform removed the debris and created a particle-free and smooth surface.

Keywords

References

  1. Halperin AR, Graser GN, RDgoff GS, Plekavich EJ. Mastering the art of complete dentures. Chicago : Quintessence Publishig Co., Inc. 1988
  2. Abe Y, Sato Y, Akagawa Y, Ohkawa S. An in vitro study of high- strength resin posterior denture tooth wear. Int J Prosthodont 1997; 10:28-34
  3. Whitman DJ et al. In vitro wear rates of three types of commercial denture tooth materials. J Prosthet Dent 1987;57:243-246 https://doi.org/10.1016/0022-3913(87)90154-5
  4. Hirano S, May KB, Wagner WC, Hacker CH. In vitro wear of resin denture teeth. J Prosthet Dent 1998:79:152-155
  5. Jooste C, Geerts G, Adams L. Comparison of the clinical abrasion resistance of six commercially available denture teeth. J Prosthet Dent 1997:77: 23-27
  6. Fraurlhofer JA Razavi R. Khan Z. Wear characteristics of high-strength denture teeth. J Prosthet Dent 1988:59:173-175
  7. Kawara M, Carter JM, Ogle RE. Johnson RR. Bonding of plastic teeth to denture base resins. J Prosthet Dent 1991:66:566-571
  8. Joo-Hee Lee, Chang-Whe Kim, Yung-Su Kim. An experimental study of the bond strength of denture teeth bonded to denture base materials. J Korean Acad Prosthodont 1996:34:464-473
  9. Clancy JMS, Boyer DB. Comparative bond strengths of light-cured. heat-cured. and autopolymerizing denture resins to denture teeth. J Prosthet Dent 1989: 61: 457-462
  10. Clancy JMS. Hawkins LF, Keller JC. Boyer DB. Bond strength and failure analysis of lightcured denture resins bonded to denture teeth. J Prosthet Dent 1991 :65:315-324
  11. Vergani CE, Giampaolo ET, Cucci ALM. Composite occlusal surfaces for acrylic resin denture teeth. J Prosthet Dent 1997:77:328-331
  12. Vergani CE, Giampaolo ET, Cucci ALM. Composite occlusal surfaces for acrylic resin denture teeth. J Prosthet Dent 1997:77:328-331
  13. Stameisen AE. Ruffino A. Replacement of lost or broken denture teeth with composites. J Prosthet Dent 1987:58:119-120
  14. Lipkin LS, Wescott T. Replacement of a fractured tooth on a removable partial denture by using two visible light-cured resin systems. J Prosthet Dent 1992:67:283-285
  15. Chang JC, Katz ST. Composite denture teeth made on a removable partial metal framework. J Prosthet Dent 1994:71:409-412
  16. Weiner S, Krause AS, Nicholas W. Esthetic modification of removable partial denture teeth with light-cured composites. J Prosthet Dent 1987: 57:381-384
  17. Jooste C. Characterization of acrylic resin denture teeth. J Prosthet Dent 1992:67:279-280
  18. Wyatt CCL, Harrop TJ, MacEntee MI. A comparison of physical characteristics of six hard denture reline materials. J Prosthet Dent 1986:55:343-346
  19. Ogle RE. Sorensen SE, Lewis EA. A new visible light-cured resin system applied to removable prosthodontics. J Prosthet Dent 1986;56:497-50 https://doi.org/10.1016/0022-3913(86)90397-5
  20. Khan Z, Fraunhofer JA, Razavi R. The staining characteristics, transverse strength, and microhardness of a visible light-cured denture base material. J Prosthet Dent 1987: 57: 384-386
  21. Arena CA Evans DB, Hilton TJ. A comparison of bond strengths among chairside hard reline materials. J Prosthet Dent 1993;70:126131
  22. Mong-Sook Yang. Bond strength of various resins to denture teeth by surface treatment. J Korean Acad Prosthodont 1999;37:4250
  23. Papazoglou E, Vasilas AI. Shear bond strengths for composite and autopolymerized acrylic resins bonded to acrylic resin denture teeth. J Prosthet Dent 1999;82:573-578 https://doi.org/10.1016/S0022-3913(99)70056-9
  24. Shen C, Colaizzi FA Bims B. Strength of denture repairs as influenced by surface treatment. J Prosthet Dent 1984:52:844-848
  25. Fletcher AM et a1. A method of improving the bonding between artificial teeth and PMMA. J Dent 1985:13:102-108
  26. Civjan S, Huget EF, Simon LB. Modifications of the fluid resin technique. JADA 1972:85: 109-112
  27. Buyukyilmaz S, Ruyter IE. The effects of polymerization temperature on the acrylic resin denture base-tooth bond. Int J Prosthodont 1997:10: 49-54
  28. Rupp NW, Bowen RL, Paffenbarger GC. Bonding cold-curing denture base acrylic resin to acrylic resin teeth. JADA 1971;83:601-606
  29. Vergani CE, Machado AL, Giampaolo ET, Pavarina AC. Effect of surface treatments on the bond strength between composite resin and acrylic resin denture teeth. Int J Prosthodont 2000; 13:383-386
  30. Vallittu PK, Lassila VP, Lappalainen R. Wetting the repair surface with methyl methacylate affects the transverse strength of repaired heat-polymerized resin. J Prosthet Dent 1994:72:639-643
  31. Sorensen SE, Fjeldstad E. Bonding of plastic teeth to acrylic resin denture base materials. J Dent Res 1961:40: 776
  32. Spratley MH. An investigation of the adhesion of acrylic resin teeth to dentures. J Prosthet Dent 1987;58:389-392 https://doi.org/10.1016/0022-3913(87)90065-5
  33. Morrow RM, Matvias FM, Windeler AS, Fuchs RJ. Bondingof plastic teeth to two heatcuring denture base resins. J Prosthet Dent 1978: 39: 565-568
  34. Beyli MS, Fraunhofer JA. Repair of fractured acrylic resin. J Prosthet Dent 1980;44:497-503 https://doi.org/10.1016/0022-3913(80)90067-0
  35. Huggett R John G, Jagger RG, Bates JF. Strength of the acrylic denture base tooth bond. Br Dent J 1982; 153: 187-190 https://doi.org/10.1038/sj.bdj.4804883
  36. Thean HPY, Chew CL, Goh KI. Shear bond strength of denture teeth to base:A comparative study. Quint Int 1996;27:425-428
  37. Tachii D, Takahashi Y, Habu T. Composite resin tooth의 occlusal surfaces와 축성한 composite resin의 bond strength. QDT 1999;24:71-77
  38. Frisch HL, Frisch KC, Klempner D. Interpenetrating polymer networks, Mod Plastics 1981, 58: 74
  39. Brosh T, Pilo R, Bichacho N, Blutstein R. Effect of combinations of surface treatments and bonding agents on the bond strength of repaired composites. J Prosthet Dent 1997;77:122-126 https://doi.org/10.1016/S0022-3913(97)70224-5
  40. Vallittu PK, Ruyter IE. The swelling phenomenon of acrylic resin polymer teeth at the interface with denture base polymers. J Prosthet Dent 1997:78:194-199
  41. Anderson IN. The strength of the joint between plain and copolymer acrylic teeth and denture base resins. Br Dent J 1958;104:317-320