Journal of the Korean Society for Heat Treatment (열처리공학회지)

The Korean Society for Heat Treatment (한국열처리공학회)
권호 표지

Analysis of the Induction Heating Process for the Joint of Nylon and Metal

나일론/금속 접합을 위한 유도가열공정의 분석

  • Chang, Yoonsang (Dept. of Mechanical Engineering, The University of Suwon) ;
  • Park, Jung-Ung (Dept. of Advanced Material Eng., Cheonan National Technical College)
  • 장윤상 (수원대학교 기계공학과) ;
  • 박정웅 (국립천안공업대학 신소재공정과)
  • Received : 2002.07.19
  • Published : 2002.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

The characteristics of the induction heating process are analyzed for the joint of nylon and metal. The temperature of metal surface is measured using thermocouples. The relations of temperature and induction heating parameters are analyzed. Heat equation models are constructed and the temperature distribution is predicted using Fluent. The effects of heating parameters on the joint strength are evaluated. Finally, the optimal parameters of induction heating process are proposed as 16kW and 6 seconds.

Keywords

Acknowledgement

Supported by : 한국과학재단

References

  1. M. I. Kohan: Nylon Plastics Handbook, Hanser Publisher, New York, (1995)
  2. 부리전기로.: Induction Heating, (1994)
  3. G. Champetire and H. Sekiguchi: ; Mechanism and Kinetics of Adiabatic Anionic Polymerization of Caprolactam in the Presence of Various Activators,' J. of Poly. Sci., (1960)
  4. 이택식, 이재헌, 이준식 : 열전달, SciTech, (1998)
  5. Fluent Inc: Fluent 5 User's Guide, (1998)
  6. A. V. Pocius: Adhesion and Adhesives Technology, Hanser/Gardner Pub., (1997)
  7. A. J. Kinloch: Adhesion and Adhesives, Chapman and Hall Ltd, (1987)