DOI QR코드

DOI QR Code

The efficiency of passive confinement in CFT columns

  • Johansson, Mathias (Department of Structural Engineering, Concrete Structures, Chalmers University of Technology)
  • 투고 : 2002.02.04
  • 심사 : 2002.08.16
  • 발행 : 2002.10.25

초록

The paper describes the mechanical behavior of short concrete-filled steel tube (CFT) columns with circular section. The efficiency of the steel tube in confining the concrete core depending on concrete strength and the steel tube thickness was examined. Fifteen columns were tested to failure under concentric axial loading. Furthermore, a mechanical model based on the interaction between the concrete core and the steel tube was developed. The model employs a volumetric strain history for the concrete, characterized by the level of applied confining stress. The situation of passive confinement is accounted for by an incremental procedure, which continuously updates the confining stress. The post-yield behavior of the columns is greatly influenced by the confinement level and is related to the efficiency of the steel tube in confining the concrete core. It is possible to classify the post-yield behavior into three categories: strain softening, perfectly plastic and strain hardening behavior. The softening behavior, which is due to a shear plane failure in the concrete core, was found for some of the CFT columns with high-strength concrete. Nevertheless, with a CFT column, it is possible to use high-strength concrete to obtain higher load resistance and still achieve a good ductile behavior.

키워드

참고문헌

  1. Ahmad, S.H. and Shah, S.P. (1982), "Stress-strain curves of concrete confined by spiral reinforcement," ACI Journal, 79-46, 484-490.
  2. Ansari, F. and Li, Q. (1998), "High-strength concrete subjected to triaxial compression," ACI Materials Journal, 95-M75, 747-755.
  3. Attard, M.M. and Setunge, S. (1996), "Stress-strain relationship of confined and unconfined concrete," ACI Materials Journal, 93-M49, 432-442.
  4. Bergman, R. (1994), "Load introduction in composite columns filled with high strength concrete," Tubular Structures VI, Grundy, Holgate &Wong (eds.), Rotterdam, The Netherlands.
  5. Bergman, R., Matsui, C., Meinsma, C. and Dutta, D. (1995), Design Guide for Concrete-Filled Hollow Section Columns under Static and Seismic Loading, CIDECT, Verlag TUV Rheinland GmbH, Köln, Germany.
  6. Bjerkeli, L. (1992), High-Strength Concrete SP1 Beams and Columns, Report 1.1, Ductility of Spirally Reinforced Columns, Rep. No. STF70 A92120. SINTEF Struct. Eng. FCB, Trondheim, Norway.
  7. Bridge, R.Q. and O'Shea, M.D. (1999), "Local buckling and confinement in axially loaded steel tubes filled with normal and high-strength concrete," Australian Journal of Structural Engineering Transactions, SE2(2&3), 123-133.
  8. Cai, S.-H. and Gu, W.-P. (1996), "Behavior and ultimate strength of steel tube confined high strength concrete columns," 4th Int. Symp. on Utilization of High-Strength/High-Performance Concrete, Paris, 827-833.
  9. Claeson, C. (1998), Structural Behavior of Reinforced High-Strength Concrete Columns, Ph.D. thesis, Chalmers University of Technology, Div. of Concrete Struct., Goteborg, Sweden.
  10. Crisfield, M.A. (1994), Non-linear Finite Element Analysis of Solids and Structures, John Wiley & Sons Ltd., Chichester, England.
  11. Cusson, D. and Paultre, P. (1994), "High-strength concrete columns confined by rectangular ties," J. Struct. Eng., ASCE, 120(3), March, 783-804. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:3(783)
  12. Cusson, D. and Paultre, P. (1995), "Stress-strain model for confined high-strength concrete," J. Struct. Eng., ASCE, 121(3), March, 468-477. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:3(468)
  13. Demarchi, G. (2000), Experimental and Analytical Study on Short Concrete Filled Steel Tubes with Circular Section, M.Sc. Thesis, Chalmers Univ. of Techn., Dep. of Struct. Eng., Sweden.
  14. European Prestandard, Eurocode 4 (1992), Design of Composite Steel and Concrete Structures, Part 1-1: General Rules and Rules for Buildings, Ref. No.1994-1-1:1992, European Committee for Standardization, Brussels, Belgium.
  15. Gardner, N.J. and Jacobson, E.R. (1967), "Structural behavior of concrete filled steel tubes," ACI Journal, 64(7), 404-412.
  16. Han, L.-H., Zhao, X.-L. and Tao, Z. (2001), "Tests and mechanics model for concrete-filled SHS stub columns, columns and beam-columns," Steel and Composite Structures, Techno-Press, 1(1), March, 51-74. https://doi.org/10.1296/SCS2001.01.01.04
  17. Imran, I. and Pantazopoulou, S.J. (1996), "Experimental study of plain concrete under triaxial stress," ACI Materials Journal, 93-M67 589-601.
  18. Johansson, M. (2000), Structural Behaviour of Circular Steel-Concrete Composite Columns Non-linear Finite Element Analyses and Experiments, Licentiate thesis, Chalmers University of Technology, Div. of Concrete Struct., Goteborg, Sweden.
  19. Madas, P. and Elnashai, A.S. (1992), "A new passive confinement model for the analysis of concrete structures subjected to cyclic and transient dynamic loading," Earthquake Engineering and Structural Dynamics, 21, 409-431. https://doi.org/10.1002/eqe.4290210503
  20. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete," J. Struct. Eng.," ASCE, 114(8), August, 783-804. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:4(783)
  21. O'Shea, M.D. and Bridge, R.Q. (1997), Tests on Circular Thin-Walled Steel Tubes Filled With Medium and High Strength Concrete, Research Report No. R755, School of Civil Engineering, University of Sydney, Australia.
  22. Palaniswamy, R. and Shah, S.P. (1974), "Fracture and stress-strain relationship of concrete under triaxial compression," J. Struct. Division, ASCE, 100(ST5), May, 901-916.
  23. Razvi, S.R. and Saatcioglu, M. (1999). "Circular high-strength concrete columns under concentric compression," ACI Struct. J., 96-S90, 817-825.
  24. Richart, F.E., Brandtzaeg, A. and Brown, R.L. (1928), A Study of the Failure of Concrete under Combined Compressive Stresses, Bulletin No. 185, University of Illinois, Engineering Experimental Station, Urbana, Illinois, USA, November, 104 pp.
  25. Rutland, C.A. and Wang, M.L. (1997), "The effects of confinement on the failure orientation in cementitious materials experimental observations," Cement and Concrete Composites, Elsevier Science Ltd., No. 19, 149-160.
  26. Sargin, M. (1971), Stress-Strain Relationship for Concrete and the Analysis of Structural Concrete Sections, Study No. 4, Solid Mechanics Division, University of Waterloo, Ontario, 167 pp.
  27. Shams, M. and Saadeghvaziri, M.A. (1999), "Nonlinear response of concrete-filled steel tubular columns under axial loading," ACI Struct. J., 96-S112, 1009-1017.
  28. Sun, Y. and Sakino, K. (2000), "A comprehensive stress-strain model for high-strength concrete confined by circular transverse reinforcement," Composite and Hybrid Structures, Proc. of 6th ASCCS Conf., Los Angeles, USA, March 22-24, 1067-1074.
  29. Tomii, M.Y., Yoshimura, K. and Morishita, Y. (1977), "Experimental studies on concrete filled steel tubular columns under concentric loading," Proc. Int. Colloquium on Stability of Structures Under Static and Dynamic Loads, 718-741.
  30. Xie, J., Elwi, A.E. and MacGregor, J.G. (1995), "Mechanical properties of three high-strength concretes containing silica fume," ACI Materials Journal, 92-M15, 135-145.

피인용 문헌

  1. Loading paths of confined concrete in circular concrete loaded CFT stub columns subjected to axial compression vol.156, 2018, https://doi.org/10.1016/j.engstruct.2017.11.010
  2. Experimental study on axially compressed circular CFST columns with improved confinement effect vol.140, 2018, https://doi.org/10.1016/j.jcsr.2017.10.025
  3. Dimensionamento de pilares preenchidos de seção circular submetidos à compressão simples, segundo a NBR 8800:2008 e Eurocode 4:2004: comparação com resultados experimentais vol.62, pp.1, 2009, https://doi.org/10.1590/S0370-44672009000100011
  4. A theoretical axial stress-strain model for circular concrete-filled-steel-tube columns vol.125, 2016, https://doi.org/10.1016/j.engstruct.2016.06.048
  5. Improved predictive model to the cross-sectional resistance of CFT vol.31, pp.8, 2017, https://doi.org/10.1007/s12206-017-0733-9
  6. Uniaxial behaviour of confined high-strength concrete-filled-steel-tube columns vol.167, pp.9, 2014, https://doi.org/10.1680/stbu.13.00004
  7. Theoretical Analysis on Mechanical Behavior of Axially Loaded Recycled Aggregate Concrete Filled Steel Tubes vol.2015, 2015, https://doi.org/10.1155/2015/270469
  8. Curvature-relevant analysis of eccentrically loaded circular concrete-filled steel tube columns vol.66, pp.24, 2014, https://doi.org/10.1680/macr.14.00112
  9. Compressive strength of circular concrete filled steel tube columns vol.56, 2012, https://doi.org/10.1016/j.tws.2012.03.008
  10. Influence of ultra-high strength infill in slender concrete-filled steel tubular columns vol.86, 2013, https://doi.org/10.1016/j.jcsr.2013.03.016
  11. Stress–strain model for concrete in FRP-confined steel tubular columns vol.49, 2013, https://doi.org/10.1016/j.engstruct.2012.11.001
  12. Effect of bond shear stress on compressive behaviour of steel tube-confined concrete with active and passive confinement 2018, https://doi.org/10.1080/19648189.2016.1219878
  13. Experimental and theoretical studies of confined HSCFST columns under uni-axial compression vol.7, pp.4, 2014, https://doi.org/10.12989/eas.2014.7.4.527
  14. Influence of concrete strength and length/diameter on the axial capacity of CFT columns vol.65, pp.12, 2009, https://doi.org/10.1016/j.jcsr.2009.07.004
  15. Modelling, verification and investigation of behaviour of circular CFST columns vol.15, pp.3, 2014, https://doi.org/10.1002/suco.201300045
  16. Strength and ductility of concrete-filled tubular piers of integral bridges vol.46, 2013, https://doi.org/10.1016/j.engstruct.2012.07.026
  17. Predicting the axial load capacity of high-strength concrete filled steel tubular columns vol.19, pp.4, 2015, https://doi.org/10.12989/scs.2015.19.4.967
  18. Capacidad resistente de pilas metálicas tubulares circulares rellenas de hormigón (CFT) en puentes integrales vol.64, pp.527, 2012, https://doi.org/10.3989/ic.11.098
  19. Analysis and calculations of steel tube confined concrete (STCC) stub columns vol.66, pp.1, 2010, https://doi.org/10.1016/j.jcsr.2009.08.003
  20. Experimental behaviours of steel tube confined concrete (STCC) columns vol.5, pp.6, 2005, https://doi.org/10.12989/scs.2005.5.6.459
  21. Confinement effect of ring-confined concrete-filled-steel-tube columns under uni-axial load vol.67, 2014, https://doi.org/10.1016/j.engstruct.2014.02.013
  22. Effect of continuous spirals on uni-axial strength and ductility of CFST columns vol.104, 2015, https://doi.org/10.1016/j.jcsr.2014.10.007
  23. Evaluation of passive confinement in CFT columns vol.66, pp.4, 2010, https://doi.org/10.1016/j.jcsr.2009.11.004
  24. Behaviour of concrete filled-steel tubes under axial load vol.169, pp.3, 2016, https://doi.org/10.1680/jstbu.14.00125
  25. Strength Calculation of Short Concrete-filled Steel Tube Columns vol.12, pp.1, 2018, https://doi.org/10.1186/s40069-018-0322-z
  26. Axial capacity of circular concrete-filled steel tube columns vol.8, pp.3, 2011, https://doi.org/10.1260/1708-5284.8.3.237
  27. Analysis of circular steel tube confined UHPC stub columns vol.23, pp.6, 2002, https://doi.org/10.12989/scs.2017.23.6.669
  28. A review and analysis of circular UHPC filled steel tube columns under axial loading vol.62, pp.4, 2017, https://doi.org/10.12989/sem.2017.62.4.417
  29. Assessment of stress-strain model for UHPC confined by steel tube stub columns vol.63, pp.3, 2002, https://doi.org/10.12989/sem.2017.63.3.371
  30. Performance of lightweight aggregate and self-compacted concrete-filled steel tube columns vol.25, pp.3, 2002, https://doi.org/10.12989/scs.2017.25.3.299
  31. A new empirical formula for prediction of the axial compression capacity of CCFT columns vol.33, pp.2, 2019, https://doi.org/10.12989/scs.2019.33.2.181
  32. RETRACTED ARTICLE: Repair of Buckled Concrete Filled Steel Tube Columns Subjected to Axial Compression vol.24, pp.5, 2002, https://doi.org/10.1007/s12205-020-0321-x
  33. Performance of Lightweight Concrete with Expansive and Air-Entraining Admixtures in CFST Columns vol.32, pp.6, 2002, https://doi.org/10.1061/(asce)mt.1943-5533.0003143
  34. Compressive behavior of steel-reinforced concrete-filled circular steel tubular stub columns vol.28, pp.None, 2002, https://doi.org/10.1016/j.istruc.2020.08.012
  35. Investigating Optimal Confinement Behaviour of Low-Strength Concrete through Quantitative and Analytical Approaches vol.14, pp.16, 2002, https://doi.org/10.3390/ma14164675
  36. Unified Theoretical Model for Axially Loaded Concrete-Filled Steel Tube Stub Columns with Different Cross-Sectional Shapes vol.147, pp.10, 2002, https://doi.org/10.1061/(asce)st.1943-541x.0003150
  37. Impact of aggregate content and tube thickness on semi‐lightweight aggregate concrete filled steel tube subjected to uniaxial compression vol.22, pp.6, 2002, https://doi.org/10.1002/suco.202100057
  38. Experimental and analytical investigation on the confinement behavior of low strength concrete under axial compression vol.36, pp.None, 2002, https://doi.org/10.1016/j.istruc.2021.12.038