DOI QR코드

DOI QR Code

Inelastic lateral-distortional buckling of continuously restrained rolled I-beams

  • Lee, Dong-Sik (Earthquake Engineering Research Center, Seoul National University) ;
  • Bradford, Mark A. (School of Civil and Environmental Engineering, The University of New South Wales)
  • 투고 : 2002.02.25
  • 심사 : 2002.08.01
  • 발행 : 2002.08.25

초록

An energy method of analysis is presented which can be used to study the inelastic lateral-distortional buckling of hot-rolled I-sections continuously restrained at the level of the tension flange. The numerical modelling leads to the incremental and iterative solution of a fourth-order eigenproblem, with very rapid solutions being obtainable, so as to enable a study of the factors that influence the strength of continuously restained I-beams to be made. Although hot-rolled I-sections generally have stocky webs and are not susceptible to reductions in their overall buckling loads as a result of cross-sectional distortion, the effect of elastic restraints, particularly against twist rotation, can lead to buckling modes in which the effect of distortion is quite severe. While the phenomenon has been studied previously for elastic lateral-distortional buckling, it is extended in this paper to include the constitutive relationship characteristics of mild steel, and incorporates both the so-called 'polynomial' and 'simplified' models of residual stresses. The method is validated against inelastic lateral-torsional buckling solutions reported in previous studies, and is applied to illustrate some inelastic buckling problems. It is noted that over a certain range of member slenderness the provisions of the Australian AS4100 steel standard are unconservative.

키워드

참고문헌

  1. Booker, J.R. and Kitipornchai, S. (1971). "Torsion of multilayered rectangular sections", J. Eng. Mech. Division, ASCE, 97(EM5), 1451-1468.
  2. Bradford, M.A. (1986). "Local buckling analysis of composite beams", Civil Engineering Transactions, I.E. Australia, CE28(4), 312-317.
  3. Bradford, M.A. (1988a). "Buckling of elastically restrained beams with web distortions ", Thin-Walled Structures, 6, 287-304. https://doi.org/10.1016/0263-8231(88)90005-5
  4. Bradford, M.A. (1988b). "Buckling strength of deformable monosymmetric I-beams ", Engineering Structures, 10, 167-173. https://doi.org/10.1016/0141-0296(88)90003-X
  5. Bradford, M.A. (1990). "Design of beams with partial end restraint", Proceedings, lnstitution of Civil Engineers, London, Part 2, 89, 163-181. https://doi.org/10.1680/iicep.1990.6939
  6. Bradford, M.A. (1992). "Lateral-distortional buckling of steel I-section members", J. Constr. Steel Res., 23, 97-116. https://doi.org/10.1016/0143-974X(92)90038-G
  7. Bradford, M.A. (2000). "Strength of compact steel beams with partial restraint", J. Constr. Steel Res., 53(2), 183200.
  8. Bradford, M.A. and Cuk, P.E. (1988). "Lateral buckling of tapered monosymmetric I-beams", J. Struct. Eng., ASCE, 114(5), 977-996. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:5(977)
  9. Bradford, M.A. and Trahair, N.S. (1981). "Distortional buckling of I-beams ", J. Structural Division, ASCE, 107(ST2), 355-370.
  10. Bradford, M.A. and Trahair, N.S. (1983). "Lateral stability of I-beams on seats", J. Structural Eng., ASCE, 109(9), 2212-2215. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:9(2212)
  11. Bradford, M.A. and Trahair, N.S. (1985). "Inelastic buckling of beam-columns with unequal end moments", J. Constr. Steel Res., 5, 195-212. https://doi.org/10.1016/0143-974X(85)90003-3
  12. Dawe, J.L. and Kulak, G.L. (1984). "Plate instability of W shapes", J. Struct. Eng., ASCE, 110(6), 1278-1291. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:6(1278)
  13. Galambos, T.V. (1963). "Inelastic lateral buckling of beams", J. Struct. Div., ASCE, 89(ST5), 217-242.
  14. Haaijer, G. (1957). "Plate buckling in the strain-hardening range", J. Eng. Mechanics Division, ASCE, 83(EM2), 1212-1247.
  15. Ketter, R.L.,Kaminsky, E.L. and Beedle, L.S. (1955). "Plastic deformation of wide-flange beam-columns," Transactions, ASCE, 100, 1028-1061.
  16. Kitipornchai, S. and Trahair, N.S. (1975). "Inelastic buckling of simply supported steel I-beams", J. Struct. Div., ASCE, 101(ST7), 1333-1347.
  17. Lee, D-S and Bradford, M.A. (2002). "Inelastic distortional buckling of simply supported beams by the finite element method," submitted for publication.
  18. Lee,G.C.,Fine, D.S. and Hastrieter, W.R. (1967). "Inelastic torsional buckling of H-columns", J. Structural Division, ASCE, 93(ST5), 295-307.
  19. Nethercot, D.A. (1974). "Residual stresses and their influence upon the lateral buckling of rolled steel beams", The Structural Engineer, 52(3), 89-96.
  20. Smith, S.T., Bradford, M.A. and Oehlers, D.J. (2002). "Inelastic unilateral buckling of mild steel plates using a Ritz-based method", lnt. J. Num. Methods in Eng., (to appear).
  21. Standards Australia (1998). AS4100 steel structures , S.A., Sydney, Australia.
  22. Timoshenko, S.P. and Woinowsky-Krieger, S. (1959). Theory of Plates and Shells, McGraw Hill, New York.
  23. Trahair, N.S. (1979). "Elastic lateral buckling of continuously restrained beam-columns", in The Profession of a Civil Engineer (E.H. Davis and D. Campbell-.llen, eds.), Sydney University Press, Sydney, Australia, 61-73.
  24. Trahair, N.S. (1993). Flexural-Torsional Buckling of Structures. E&FN Spon, London.
  25. Trahair, N.S. and Kitipornchai, S. (1972). "Buckling of inelastic I-beams under uniform moment", J. Struct. Div., ASCE, 98(ST11), 2551-2566.
  26. Trahair, N.S. and Bradford, M.A. (1998). The behaviour and design of steel structures to AS4100, 3rd Australian edn., E&FN Spon, London.

피인용 문헌

  1. Inelastic distortional buckling of hot-rolled I-section beam-columns vol.4, pp.1, 2004, https://doi.org/10.12989/scs.2004.4.1.023
  2. Inelastic lateral-distortional buckling of continuously restrained continuous beams vol.5, pp.4, 2005, https://doi.org/10.12989/scs.2005.5.4.305