DOI QR코드

DOI QR Code

Influence of viscous phenomena on steel-concrete composite beams with normal or high performance slab

  • Fragiacomo, M. (Department of Civil Engineering, University of Trieste) ;
  • Amadio, C. (Department of Civil Engineering, University of Trieste) ;
  • Macorini, L. (Department of Civil Engineering, University of Trieste)
  • 투고 : 2001.02.14
  • 심사 : 2002.01.30
  • 발행 : 2002.04.25

초록

The aim of the paper is to present some results about the influence of rheological phenomena on steel-concrete composite beams. Both the cases of slab with normal and high performance concrete for one and two-span beams are analysed. A new finite element model that allows taking into account creep, shrinkage and cracking in tensile zones for concrete, along with non-linear behaviour of connection, steel beam and reinforcement, has been used. The main parameters that affect the response of the composite beam under the service load are highlighted. The influence of shrinkage on the slip over the supports is analysed, together with the cracking along the beam. At last, by performing a collapse analysis after a long-term analysis, the influence of rheological phenomena on the ductility demand of connection and reinforcement is analysed.

키워드

참고문헌

  1. Amadio, C. and Fragiacomo, M. (1993), "A finite element model for the study of creep and shrinkage effects in the composite beams with deformable shear connections", Costruzioni Metalliche, 4, 213-228.
  2. Amadio, C. and Fragiacomo, M. (1997), "Simplified approach to evaluate creep and shrinkage effects in steelconcrete composite beams", J. Struct. Eng., ASCE, 123(9), 1153-1162. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:9(1153)
  3. Amadio, C. and Fragiacomo, M. (1999), "A finite element model for short and long term analysis of steelconcrete composite beams in cracked phase". XVII C.T.A. Congress, Naples, Italy, 2, 251-260.
  4. Amadio, C., Fragiacomo, M. and Macorini, L. (2000), "Numerical evaluation of long-term behaviour for continuous steel-concrete composite beams", Int. Conf. on Steel Structures of the 2000's, Istanbul, Turkey, 137-142.
  5. Ansourian, P. (1982), "Experiments on continuous composite beam", Proceedings, The Institution of Civil Engineers, 73(2), 25-51.
  6. Aribert, J.M. (1988), "Etude critique par voie numerique de la methode proposee dans lEurocode 4 pour le dimensionnement des poutres mixtes acier-beton a connexion partielle", Construction Metallique, 1, 3-26.
  7. Bullo, S. and Di Marco, R. (1995), "Effects of high-performance concrete on stud shear connector behaviour". Proc. Nordic Steel Construction Conference, Malmo, Sweden, 577-584.
  8. Bullo, S. and Di Marco, R. (1998), "Slip requirement in steel-high performance concrete composite beams with deformable connection", III Italian Workshop on Composite Structures, Ancona, Italy, 53-66.
  9. CEB (1993), CEB Bull. $n^{\circ}$213/214: CEB-FIP Model Code 90. Comite Euro-International du Beton, Lausanne, Switzerland.
  10. CEN (1992), Eurocode 4, Design of composite steel and concrete structures, Part. 1-1: General rules and rules for buildings, Bruxelles, Belgium.
  11. Gattesco, N. (1997), "Fatigue in stud shear connectors". International Conference, on Composite Construction- Conventional and Innovative, Innsbruck, Austria, 139-144.
  12. Hilsdorf, H.K. and Muller, H.S. (1999), "Effects of time upon strength and deformation", Structural Concrete Textbook, Vol. 1, FIB CEB-FIP, Lausanne, Switzerland, 37-55.
  13. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress strain model for confined concrete", J. Struct. Eng., ASCE, 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  14. Newmark, N.M., Siess, C.P. and Viest, I.M. (1951), "Test and analysis of composite beams with incomplete interaction". Proc. Soc. Exptl. Stress. Anal. 9(1), 75-92.
  15. Ollgard, J.G., Slutter, R.G. and Fischer, J.W. (1971), "Shear strength of stud connectors in lightweight and normal weight concrete", AISC Eng. Journal, 55-64.
  16. Razvi, S. and Saatcioglu, M. (1999), "Confinement model for high-strength concrete", J. Struct. Eng. ASCE, 125(3), 281-289. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:3(281)
  17. Stevens, N.J., Uzumeri, S.M., Collins, M.P. and Will, G.T. (1991), "Constitutive model for reinforced concrete finite element analysis", ACI Struct. J., 88(1), 49-59.

피인용 문헌

  1. Analytical solutions for the time-dependent behaviour of composite beams with partial interaction vol.43, pp.13, 2006, https://doi.org/10.1016/j.ijsolstr.2005.03.032
  2. Displacement-based formulations for composite beams with longitudinal slip and vertical uplift vol.65, pp.8, 2006, https://doi.org/10.1002/nme.1484
  3. Short- and long-term analyses of composite beams with partial interaction stiffened by a longitudinal plate vol.6, pp.3, 2006, https://doi.org/10.12989/scs.2006.6.3.237
  4. Evaluation of the deflection of steel-concrete composite beams at serviceability limit state vol.73, 2012, https://doi.org/10.1016/j.jcsr.2012.01.009
  5. General method of analysis for composite beams with longitudinal and transverse partial interaction vol.84, pp.31-32, 2006, https://doi.org/10.1016/j.compstruc.2006.07.002
  6. State of the art on the time-dependent behaviour of composite steel–concrete structures vol.80, 2013, https://doi.org/10.1016/j.jcsr.2012.08.005
  7. Control of time-dependent effects in steel-concrete composite frames vol.13, pp.4, 2013, https://doi.org/10.1007/s13296-013-4002-1
  8. Time-dependent analysis of slender, tapered reinforced concrete columns vol.36, pp.2, 2002, https://doi.org/10.12989/scs.2020.36.2.229