DOI QR코드

DOI QR Code

Moving force identification from bending moment responses of bridge

  • Yu, Ling (Department of Civil and Structural Engineering, The Hong Kong Polytechnic University) ;
  • Chan, Tommy H.T. (Department of Civil and Structural Engineering, The Hong Kong Polytechnic University)
  • 투고 : 2001.02.05
  • 심사 : 2002.05.03
  • 발행 : 2002.08.25

초록

Moving force identification is a very important inverse problem in structural dynamics. Most of the identification methods are eventually converted to a linear algebraic equation set. Different ways to solve the equation set may lead to solutions with completely different levels of accuracy. Based on the measured bending moment responses of the bridge made in laboratory, this paper presented the time domain method (TDM) and frequency-time domain method (FTDM) for identifying the two moving wheel loads of a vehicle moving across a bridge. Directly calculating pseudo-inverse (PI) matrix and using the singular value decomposition (SVD) technique are adopted as means for solving the over-determined system equation in the TDM and FTDM. The effects of bridge and vehicle parameters on the TDM and FTDM are also investigated. Assessment results show that the SVD technique can effectively improve identification accuracy when using the TDM and FTDM, particularly in the case of the FTDM. This improved accuracy makes the TDM and FTDM more feasible and acceptable as methods for moving force identification.

키워드

참고문헌

  1. Bendat, J.S. and Piersol, A.G. (1993), Engineering Application of Correlation and Spectral Analysis, 2nd Edition, John Wiley, New York.
  2. Cao, X. Sugiyama, Y. and Mitsui, Y. (1998), "Application of artificial neural networks to load identification", Comput. Struct., 69, 63-78. https://doi.org/10.1016/S0045-7949(98)00085-6
  3. Chan, T.H.T., Law, S.S. and Yung, T.H. (2000a), "Moving force identification using an existing prestressed concrete bridge", Eng. Struct., 22, 1261-1270. https://doi.org/10.1016/S0141-0296(99)00084-X
  4. Chan, T.H.T. and Yung, T.H. (2000b), "A theoretical study of force identification using prestressed concrete bridges", Eng. Struct., 23, 1529-1537.
  5. Chan, T.H.T., Yu Ling and Law, S.S. (2000c), "Comparative studies on moving force identification from bridge strains in laboratory", J. Sound Vib., 235(1), 87-104. https://doi.org/10.1006/jsvi.2000.2909
  6. Fryba, L. (1972). Vibration of Solids and Structures under Moving Loads", Noordhoff International Publishing, Prague.
  7. Gloub, G.H. and Van Loan, C.F. (1996), Matrix Computations, 3rd Edition, The Johns Hopkins University Press, London.
  8. Law, S.S., Chan, T.H.T. and Zeng, Q.H. (1997), "Moving force identification: a time domain method", J. Sound Vib., 201, 1-22. https://doi.org/10.1006/jsvi.1996.0774
  9. Law, S.S., Chan, T.H.T. and Zeng, Q.H. (1999), "Moving force identification-a frequency and time domain analysis", J. Dynamic System, Measurement and Control, 121, 394-401. https://doi.org/10.1115/1.2802487
  10. Lindfield, G. and Penny, J. (1995), Numerical Methods Using Matlab, Ellis Horwood Limit, London.
  11. Press, W.H., Teukolsky, S.A., Vetteling, W.T. and Flannery, B.P. (1996), Numerical Recipes in Fortran 90: The Art of Parallel Scientific Computing, 2nd Edition, volume 2 of Fortran numerical recipes, Cambridge University Press, England.
  12. Starkey, J.M. and Merrill, G.L. (1989), "On the ill-conditioned nature of indirect force-measurement techniques", The Int. J. Analytical and Experimental Modal Analysis, 14(3), 103-108.
  13. Stevens, K.K. (1987), "Force identification problems-an overview", Proc. SEM Spring Conf. on Experimental Mechanics, 838-844.
  14. Tang, X.J. (1990), "Precision problems of dynamic load identification in time domain", J. Dalian University of Technology, 30(1), 29-38.
  15. Timoshenko, S.P., Young, D.H. and Weaver, W. (1974), Vibration Problems in Engineering, Wilery, New York.

피인용 문헌

  1. Moving force identification based on redundant concatenated dictionary and weighted l 1 -norm regularization vol.98, 2018, https://doi.org/10.1016/j.ymssp.2017.04.032
  2. Recent research on identification of moving loads on bridges vol.305, pp.1-2, 2007, https://doi.org/10.1016/j.jsv.2007.03.057
  3. Recent developments in inverse problems of vehicle–bridge interaction dynamics vol.6, pp.1, 2016, https://doi.org/10.1007/s13349-016-0155-x
  4. Moving force identification from bridge dynamic responses vol.21, pp.3, 2005, https://doi.org/10.12989/sem.2005.21.3.369
  5. Experimental study on the identification of dynamic axle loads of moving vehicles from the bending moments of bridges vol.29, pp.9, 2007, https://doi.org/10.1016/j.engstruct.2006.11.017
  6. State-of-the-art review on bridge weigh-in-motion technology vol.19, pp.9, 2016, https://doi.org/10.1177/1369433216655922
  7. Effectiveness of Vehicle Weight Estimation from Bridge Weigh-in-Motion vol.2009, 2009, https://doi.org/10.1155/2009/312034
  8. A MOM-based algorithm for moving force identification: Part II - Experiment and comparative studies vol.29, pp.2, 2008, https://doi.org/10.12989/sem.2008.29.2.155
  9. Identification of vehicle axle loads from bridge responses using updated static component technique vol.28, pp.11, 2006, https://doi.org/10.1016/j.engstruct.2006.02.012
  10. Theory Study by CGM for Moving Force Identification vol.238, pp.1662-7482, 2012, https://doi.org/10.4028/www.scientific.net/AMM.238.823
  11. Theory Study for Moving Force Identification vol.476-478, pp.1662-8985, 2012, https://doi.org/10.4028/www.scientific.net/AMR.476-478.2292
  12. Numerical Investigation on the Transverse Vibration of Prestressed Large-Span Beams with Unbonded Internal Straight Tendon vol.14, pp.9, 2002, https://doi.org/10.3390/ma14092273
  13. A new iteration regularization method for dynamic load identification of stochastic structures vol.156, pp.None, 2002, https://doi.org/10.1016/j.ymssp.2020.107586