Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Seismic repair of exterior R/C beam-to-column joints using two-sided and three-sided jackets

  • Tsonos, Alexander G. (Aristotel University of Thessaloniki, Division of Structural Engineering)
  • Published : 2002.01.25
⟨ Previous Next ⟩

Abstract

The use of local two-sided and three-sided jacketing for the repair and strengthening of reinforced concrete beam-column joints damaged by severe earthquakes is investigated experimentally and analytically. Two exterior beam-column joint specimens ($O_1$ and $O_2$) were submitted to a series of cyclic lateral loads to simulate severe earthquake damage. The specimens were typical of existing older structures built in the 1960s and 1970s. The specimens were then repaired and strengthened by local two-sided or three-sided jacketing according to UNIDO Manual guidelines. The strengthened specimens ($RO_1$ and $RO_2$) were then subjected to the same displacement history as that imposed on the original specimens. The repaired and strengthened specimens exhibited significantly higher strength, stiffness and better energy dissipation capacity than the original specimens.

Keywords

References

  1. ACI-ASCE Committee 352 (1985), "Recommendations for design of beam-column joints in monolithic reinforced concrete structures (ACI 352R-85)", ACI Struct. J, 82(3), 266-283.
  2. Aguilar, J., Juarez, H., Ortega, R., and Iglesias, J. (1989), "The Mexico Earthquake of september 19, 1985. statistics of damage and of retrofitting techniques in reinforced concrete buildings affected by the 1985 Earthquake", Earthquake Spectra J., 5(1), Califorina, U.S.A., 145-151. https://doi.org/10.1193/1.1585516
  3. Alcoser, S.M., and Jirsa, J.O. (1990), "Assessment of the response of reinforced concrete frame connections redesigned by jacketing", Proc. of the Fourth U.S. National Conference on Earthquake Engineering, Califorina, U.S.A., 295-304.
  4. CEN Tech. Comm. 250/SC8 (1993)Eurocode 8: Earthquake Resistant Design of the Structures, Part 1.4 (Draft): Repair and Strengthening, CEN, Berlin.
  5. Corazao, M., Durrani, A.J., and Taylor, H. (1988), "Repair and strengthening of concrete structures damaged by earthquakes", Proc. of Ninth World Conference on Earthquake Engineering, Vol. VII, Tokyo-Kyoto, Japan, 389-395.
  6. Eurocode No 8:1993, "Earthquake resistant design of structures", Commission of European Communities, CEN/ TC 250/SC8.
  7. Gulkan, P. (1977), "The Inelastic response of repaired reinforced concrete beam-column connections", Proc. of Sixth World Conference on Earthquake Engineering, VoL III, New Delhi, India, 2473-2479.
  8. Hakuto, S., Park, R., and Tanaka, H. (2000) "Seismic load tests on interior and exterior beam-column joints with substandard reinforcing details", ACI Struct. J, 97(1), 11-25.
  9. Jara, M., Hernandez, C., Garcia, R, and Robles, F. (1989), The Mexico Earthquake of September 19, 1985. typical cases of repair and strengthening of concrete buildings", Earthquake Spectra J., 5(1), Califorioa, U.S.A., 157-193.
  10. Karayanois, C.G., Sideris, K.K., and Economou, C.M. (1995), "Response of repaired RC exterior joints under cyclic loading", Proc. 5th SECED Conference on European Seismic Design Practice Research and Application, Balkema, London, 285-292.
  11. Karayanois, C.G., and Chalioris, C.E (1998), "Repair of R/C elements damaged by seismic excitations using resin injections", Scientific Review, Ktirio, 3, 31-38.
  12. Karayannis, C., Chalioris, C., and Sideris, K. (1998), "Effectiveness of RC beam-column connection repair using epoxy resin injections", J of Earthquake Eng., 2(2), Imperial College Press, 217-240. https://doi.org/10.1142/S1363246998000101
  13. Kuroiwa, J., and Kogan, J. (1980), "Repair and strengthening of buildings damaged by earthquakes", Proc. of Seventh World Conference on Earthquake Engineering, 4, Istanbul, Turkey, 569-576.
  14. Penelis, G.G., and Kappos, A.J. (1997), "Earthquake-resistant concrete structures", Chapman & Hall, 572.
  15. Penelis, G.G. (1999), "Post-earthquake repair and strengthening of R/C structures", Keynote Lecture at the 13th Greek Conference on R/C Structures, Rethyrnnon, Kreta (in Greek) 17.
  16. Popov, E., and Bertero, V.V. (1975), "Repaired R/C members under cyclic loading", Earthq. Eng. and Struct. Dyn., John Wiley and Sons, 4,129-144. https://doi.org/10.1002/eqe.4290040204
  17. Rodriguez, M., and Park, R (1991), "Repair and strengthening of reinforced concrete buildings for seismic resistance", Earthquake Spectra J., 7(3),439-459. https://doi.org/10.1193/1.1585636
  18. Teran, A., and Ruiz, J. (1992), "Reinforced concrete jacketing of existing structures", Proc. of the Tenth World Conference on Earthquake Engineering, Madrid, Spain, 5107-5113.
  19. Tsonos, A. (1996), "Towards a new approach in the design of R/C beam-column joints", Technika Chronika, Scientific J. of the Technical Chamber of Greece, 16(1-2), 69-82.
  20. Tsonos, A.G. (1997), "Shear strength of ductile reinforced concrete beam-to-column connections, for seismic resistant structures", J. of European Earthquake Engineering, No.2, 54-64.
  21. Tsonos, A.G. (1999), "Lateral load response of strengthened reinforced concrete beam-to-column joints", ACI Struct. J., 96(1), 46-56.
  22. UNDP/UNIDO PROJECT RER/79/015, UNIDO (1983), "Repair and strengthening of reinforced concrete, stone and brick masonry buildings", Building Construction Under Seismic Conditions in the Balkan Regions, 5, Vienna, 231.

Cited by

  1. An innovative solution for strengthening of old R/C structures and for improving the FRP strengthening method vol.1, pp.3, 2014, https://doi.org/10.12989/smm.2014.1.3.323
  2. Pre-earthquake fuzzy logic and neural network based rapid visual screening of buildings vol.27, pp.1, 2007, https://doi.org/10.12989/sem.2007.27.1.077
  3. Cyclic performance of retrofitted reinforced concrete beam–column joints using steel prop vol.36, 2012, https://doi.org/10.1016/j.conbuildmat.2012.04.115
  4. Pre-earthquake and post-earthquake retrofitting of poorly detailed exterior RC beam-to-column joints vol.109, 2016, https://doi.org/10.1016/j.engstruct.2015.11.009
  5. Prefabricated-HSPRCC panels for retrofitting of existing RC members-a pioneering study vol.56, pp.1, 2015, https://doi.org/10.12989/sem.2015.56.1.001
  6. A new method for earthquake strengthening of old R/C structures without the use of conventional reinforcement vol.52, pp.2, 2014, https://doi.org/10.12989/sem.2014.52.2.391
  7. Rehabilitation of earthquake damaged external RC beam-column joints by joint enlargement using prestressed steel angles vol.46, pp.2, 2017, https://doi.org/10.1002/eqe.2794
  8. Shear strength model of reinforced-concrete exterior joint under cyclic loading vol.170, pp.8, 2017, https://doi.org/10.1680/jstbu.15.00022
  9. Seismic retrofit of external RC beam–column joints by joint enlargement using prestressed steel angles vol.81, 2014, https://doi.org/10.1016/j.engstruct.2014.10.006
  10. An innovative experimental method to upgrade performance of external weak RC joints using fused steel prop plus sheets vol.21, pp.2, 2016, https://doi.org/10.12989/scs.2016.21.2.443
  11. Improvement of the earthquake resistance of R/C beam-column joints under the influence of P-△ effect and axial force variations using inclined bars vol.18, pp.4, 2004, https://doi.org/10.12989/sem.2004.18.4.389
  12. Performance enhancement of R/C building columns and beam–column joints through shotcrete jacketing vol.32, pp.3, 2010, https://doi.org/10.1016/j.engstruct.2009.12.001
  13. Modelling exterior beam-column joints for seismic analysis of RC frame structures vol.37, pp.13, 2008, https://doi.org/10.1002/eqe.826
  14. Inter-story pounding between multistory reinforced concrete structures vol.20, pp.5, 2005, https://doi.org/10.12989/sem.2005.20.5.505
  15. Behavior of FRP-Retrofitted Joints Built with Plain Bars and Low-Strength Concrete vol.15, pp.3, 2011, https://doi.org/10.1061/(ASCE)CC.1943-5614.0000156
  16. Experimental investigation on cyclic response of RC elements repaired by CFRP external reinforcing systems vol.112, 2017, https://doi.org/10.1016/j.compositesb.2016.12.053
  17. Precast fiber reinforced cementitious composites for seismic retrofit of deficient rc joints – A pilot study vol.52, 2013, https://doi.org/10.1016/j.engstruct.2013.02.020
  18. Effectiveness of R/C jacketing of substandard R/C columns with short lap splices vol.1, pp.3, 2014, https://doi.org/10.12989/smm.2014.1.3.273
  19. Strengthening of substandard reinforced concrete beam-column joints by external post-tension rods vol.107, 2016, https://doi.org/10.1016/j.engstruct.2015.11.004
  20. Influence of pinching effect of exterior joints on the seismic behavior of RC frames vol.6, pp.1, 2014, https://doi.org/10.12989/eas.2014.6.1.089
  21. Seismic retrofit of beam–column joints using prestressing wire vol.170, pp.10, 2017, https://doi.org/10.1680/jstbu.15.00109
  22. Local retrofit of exterior RC beam–column joints using thin RC jackets—An experimental study vol.37, pp.5, 2008, https://doi.org/10.1002/eqe.783
  23. Limit states of RC structures with first floor irregularities vol.47, pp.6, 2013, https://doi.org/10.12989/sem.2013.47.6.791
  24. Seismic retrofit schemes for RC structures and local-global consequences vol.8, pp.1, 2006, https://doi.org/10.1002/pse.208
  25. A simplified numerical model to simulate RC beam–column joints collapse pp.1573-1456, 2018, https://doi.org/10.1007/s10518-018-0472-z
  26. Strut-Relieved Single Steel Haunch Bracing System for Mitigating Seismic Damage of Gravity Load Designed Structures vol.144, pp.10, 2018, https://doi.org/10.1061/(ASCE)ST.1943-541X.0002167
  27. Seismic Retrofit of Full-Scale Substandard Extended Rectangular RC Columns through CFRP Jacketing: Test Results and Design Recommendations vol.23, pp.1, 2019, https://doi.org/10.1061/(ASCE)CC.1943-5614.0000907
  28. Influence of exterior joint effect on the inter-story pounding interaction of structures vol.33, pp.2, 2009, https://doi.org/10.12989/sem.2009.33.2.113
  29. A practical model for simulating nonlinear behaviour of FRP strengthened RC beam-column joints vol.27, pp.1, 2002, https://doi.org/10.12989/scs.2018.27.1.049
  30. A practical model for simulating nonlinear behaviour of FRP strengthened RC beam-column joints vol.27, pp.1, 2002, https://doi.org/10.12989/scs.2018.27.1.049
  31. Analytical prediction of seismic behavior of RC joints and columns under varying axial load vol.174, pp.None, 2002, https://doi.org/10.1016/j.engstruct.2018.07.103
  32. Model for the evaluation of the beam-column joint ultimate strength -a more simplified version vol.16, pp.2, 2002, https://doi.org/10.12989/eas.2019.16.2.141
  33. Experimental and analytical assessment of different anchorage systems used for CFRP flexurally retrofitted exterior RC beam-column connections vol.28, pp.None, 2002, https://doi.org/10.1016/j.istruc.2020.09.037
  34. The strong column-weak beam design philosophy in reinforced concrete frame structures: A literature review vol.23, pp.16, 2002, https://doi.org/10.1177/1369433220933463
  35. Mechanical Properties of Grout Materials for Concrete Structure Repairs vol.1125, pp.1, 2002, https://doi.org/10.1088/1757-899x/1125/1/012017
  36. Analytical Model for the Design of HSFC and UHSFC Jackets with Various Steel Fiber Volume Fraction Ratios for the Retrofitting of RC Beam-Column Joints vol.13, pp.20, 2002, https://doi.org/10.3390/su132011209