Journal of the Korean Society for Nondestructive Testing (비파괴검사학회지)

The Korean Society for Nondestructive Testing (한국비파괴검사학회)
권호 표지

AE Characteristics on the Damage Behavior of TiNi/A16061 Shape Memory Alloy Composites at High Temperature

TiNi/A16061 형상기억복합재료의 고온에서의 손상거동에 대한 AE 특성

  • Published : 2002.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

It has been known that tensile residual stresses occurring by the thermal expansion coefficient mismatch between fiber and matrix is a cause of the weak strength of metal matrix composites(MMCs). In order to solve this problem, TiNi alloy fiber was used as a reinforced material in TiNi/A16001 shape memory alloy composite in this study. TiNi alloy fiber improves the tensile strength of the composite by causing compressive residual stress in matrix on the basis of its shape memory effect. Pre-strain was imposed to generate the compressive residual stresses inside the TiNi/A16001 shape memory alloy composites. AE technique was used to quantify the microscopic damage behavior of the composite at high temperature. The effect of applied pre-strains on the AE behavior was also evaluated.

금속복합재료 (MMC) 내부에서의 강화재와 기지재사이의 열팽창계수의 차이에 의해 발생하는 인장잔류응력은 복합재료의 인장강도를 저하시키는 심각한 문제중의 하나이다. 따라서 본 연구에서는 TiNi/A16061 형상기억복합재료내부의 인장잔류응력의 문제를 해결하기 위하여 강화재로써 TiNi 합금을 사용하였다. TiNi 합금은 형상기억효과를 이용하여 복합재료내부에 압축잔류응력을 발생시킴으로써 인장강도를 증가시키는 역할을 한다. 복합재료내부에 압축잔류응력을 발생시키기 위하여 예변형(pre-strain)을 가하였다. 본 연구에서는 예변형의 변화에 따른 압축잔류응력의 영향을 평가하였으며 AE 기법을 이용하여 고온에서의 복합재료의 미시적 손상거동과 예변형의 영향을 평가하였다.

Keywords

References

  1. W. A. Logsdon and P. K. Liaw, 'Tensile, Fracture Toughness and Fatigue Crack Growth Rate Properties of Silicon Carbide Whisker and Particulate Reinforced Aluminum Metal Matrix Composite,' Engineering Fracture Mechanics, Vol. 24, No. 5, pp, 737-751, (1986)
  2. 권재도, 안정주, 문윤배, '제적비가 SiCp/Al 복합재료의 기계적 및 피로균열진전 특성에 미치는 영향’, 대한기계학회논문집 A, 제 20권 제 4호, pp. 1301-1308, (1996)
  3. Yuanti Huang, Gueping Y and Ping He, 'The Investigation of Internal Friction Electric Resistance and Shape Change in TiNi Alloy During Phase Transformations,' Scripta Metallurgica, Vol. 19, pp. 1033-1038, (1985)
  4. 김영식, 박환수, 'Ti-Ni계 형상기억합금 화이어의 회전굽힘피로 특성' 대한기계학회논문집 A, 제 23권 제 3호, pp. 490-496, (1999)
  5. Liu M, Zhang X. M, Liu L, Li YY and Shelyakov AV, 'In Situ TEM Observations of Martensite-Austenite Transformations in a Ni49Ti36Hf15 High Temperature Shape Memory Alloy,' J. of Materials Science Letters, Vol. 19, No. 15, pp. 1383-1386, (2000) https://doi.org/10.1023/A:1006717619342
  6. H. Prahlad, I. Chopra, 'Experimental Characterization of Ni-Ti Shape Memory Alloy Wires under Complex Loading Conditions,' Smart Structures and Materials 1999: Smart Structures and Integrated Systems, pp. 604-616, (1999)
  7. 정태헌, 이동주, '전단지연 이론을 이용한 단섬유 형태의 SMA 보강 고분자 복합재료의 열변형 거동해석', 대한기계학회논문집 A, 제 23권 제 6호, pp. 1001-1010, (1999)
  8. J. K. Lee, J. H. Lee, S. R. Jeong, 'A Study on Microscopic Damage Behavior of Carbon Fiber Sheet Reinforced Concrete using Acoustic Emission Technique', Proc. of the 2-Asia-Australasian Conference on Composite Materials, Vol. II, pp. 781-786, (2000)
  9. Bukkapatnam STS, Kumara SRT, Lakhtakia A, 'Analysis of Acoustic Emission Signals Machining', J. of Manufacturing Science & Engineering, Vol. 121, No. 4, pp. 568-576, (1999) https://doi.org/10.1115/1.2833058
  10. A. C. Okafor, S. R. Birdsong, 'Monitoring Drilling of Advanced Composites, Drill Wear and Exit Hole Delamination using Wave-Based Acoustic Emission', Proc. of the Process Control and Sensors for Manufacturing II , pp. 115-124, (1999)
  11. Yano T, Budiyanto K, Yoshida K, Iseki T, 'Fabrication of Silicon Carbide Fiber-Reinforced Silicon Carbide Composite by Hot-Pressing', Fusion Engineering & Design, Vol. 41, pp. 157-163, (1998)