Journal of the Korean Society for Nondestructive Testing (비파괴검사학회지)

The Korean Society for Nondestructive Testing (한국비파괴검사학회)
권호 표지

Evaluation of Abrasive Wear Face Using SAW

표면탄성파를 이용한 마모 표면부의 평가

  • Published : 2002.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

The frequency dependency of the Rayleigh surface wave was investigated indirectly by measuring the angular dependency of the backward radiation of the incident ultrasonic wave in the abrasion specimens, which was explained in view of the residual stress distribution. The peak intensity of the backward radiation profile decreased and the right half width of the profile increased with an increase of the variational rate of residual stress for the scuffing specimen. The peak intensity was also affected by the surface wave scattering during the propagation around the micro-damages. The peak angle might depend on not only the amount of residual stress but also the micro-structure. The result observed in this study demonstrates the high potential of the backward radiated ultrasound as a tool for the nondestructive evaluation of the subsurface gradients of materials.

레일리 (Rayleigh) 표면탄성파의 속도와 산란의 주파수 의존성을 이용하여 마모로 인해 열화된 AISI 1045강 사편의 깊이방향 잔류응력 분포 (열화 기울기)의 비파괴적인 평가가 시도되었다. 액체/고체 경계면에 초음파가 특정각도로 입사할 때 발생한 표면탄성파의 산란과 복사로 인해 나타나는 후방복사 프로파일의 오른쪽 반치폭과 크기 그리고 발생각으로 잔류응력 분포의 해석도 가능하였으며 평균법에 의한 복사파의 세기 및 스펙트럼의 변화는 잔류응력 분포와 열화로 인해 발생한 미세 결함 밀도과의 연관성을 보여주었다.

Keywords

References

  1. I. A. Viktorov, Rayleigh and Lamb waves, Plenum Press, New York, (1967)
  2. T.L.Szabo, J.Appl.Phys. 46(4), pp. 1448-1454, (1975)
  3. S. D. Kwon and H. C. Kim, 'Dispersion of acoustic surface waves by velocity gradients,' J Appl. Phys., Vol. 62, pp. 2660-2664, (1987) https://doi.org/10.1063/1.339444
  4. H. L. Bertoni and T. Tamir, 'Unified theory of Rayleigh angle phenomena for acoustic beam at liquid-solid interfaces,' J Awl, Phys, 2, pp.167-172, (1973)
  5. Ho Chul Kim, Jeong Ki Lee, Sang Young Kim and Sung Duk Kwon, 'Influence of microstructure on the ultrasonic backscattered energy from a liquid/solid interface at the Rayleigh angle,' Jpn. J. Appl. Phys., Vol. 38, Part 1, No. 1A, pp. 260-267, (1999)
  6. Sung D. Kwon, Myoung S. Choi and Seung H. Lee, 'The applications of ultrasonic backward radiation from a layered substrate submerged in liquid,' NDT&E International, Vol. 33, Issue 5, pp. 275-281, (2000)
  7. K. T. Kim and K. C. Ludema, 'A correlation between low cycle fatigue properties and scuffing properties of 4340 steel,' ASME J. of Tribology, Vol. 117, pp. 617-621, (1995) https://doi.org/10.1115/1.2831525
  8. Y.Z.Lee and K C Ludema, 'The shared load wear model in lubricated sliding: scuffing criteria and wear coefficient', Wear, Vol. 138, pp. 13-19, (1990) https://doi.org/10.1016/0043-1648(90)90164-6
  9. S. C. Lee and H. S. Cheng, 'Correlation of scuffing experiments with EHL analysis of rough surfaces,'ASME Journal of Tribology, VoI.113,pp.318-326,(1991)
  10. T. Sheiretov, H. Yoon and C. Cusano, 'Scuffing under dry sliding conditions - part1: Experimental studies', Tribology Transaction, vol. 41, pp.435- 446, (1998)
  11. 권성덕, 윤석수, 송성진, 배동호, '후방복샤된 초음파를 이용한 12Cr강 부식 피로특성 평가'’ 비파괴검사학회지, Vol. 20, No.5, pp. 397-401, (2000)
  12. G. J. Curtis, Chaper 8, Ultrasonic Testing Eited by J. Szilard, 1982 John Wiely & Sons Ltd
  13. 권성덕, 윤석수, 이승희, '주피수 의존성이 표면탄성파의 속도 결정에 미치는 영향’ 비파괴검사 학회지,Vol. 19, No.5, pp. 340 346. (1999)