References
- 가스기술기준(KGS PV001-1998), '압력용기 사용중 검사기준,' 1998
- 가스기술기준(KGS PV002-1999), '압력용기 검사 실무지침,' 1999
- 가스기술기준(KGS P001-1999), '석유화학 배관계 검사기준,' 1999
- 가스기술기준(KGS P002-1999), '석유화학 배관계 검사 실무 지침,' 1999
- 가스기술기준(KGS PV009-2000), '석유화학용가열로 튜브두께 계산 기준,' 2000
- 가스기술기준(KGS PV010-2000), '직화식 가열로 및 보일러검사 실무지침,' 2000
- Section 10 Assessment of Components Operating in the Creep Regime, API 579 Fitness for Service Procedures, (Draft) January 2000
- A. Saxena, 'Nonlinear Fiacture Mechanics for Engineers,' CRC Press, 1998
- S. Konosu, A. Hashimoto, H. Mashiba, M. Takeshima and T. Ohtsuka, 'Creep crack growth properties of type 308 austenitic stainless steel weld metals,' Welding Journal, Vol. 77, No. 8, pp. 322-327, 1998
- S. Konosu, H. Mashiba, M. Takeshima, and T. Ohtsuka, 'Effects of pretest ageing on creep crack growth properties of type 308 austenitic stainless steel weld metals,' Engineering Failure Analysis, Vol. 8, No. 1, pp. 75-85, 2001 https://doi.org/10.1016/S1350-6307(99)00047-3
- M. Kamaraj and V. M. Radhakrishnan, 'Creep cracking in austenitic weld metal,' ICF 7. Advances in Fracture Research, Vol. 2, Houston, Texas, USA, 20-24 Mar, 1989
- V. M. Radhakrishnan and M. Kamaraj, 'Relation between rupture time and steady state rate integral,' Materials Science & Engineering A, Vol. A127, No. 1, pp.15-18, 1990
- V. M. Radhakrishnan, M. Kamaraj and V. V. Balasubramaniam, 'Life estimation of cracked stainless steel components under creep conditions,' Transactions of the ASME, Journal of Engineering Materials and Technology, Vol. 113, No. 3, pp.303-316, 1991 https://doi.org/10.1115/1.2903410
- V. M. Radhakrishnan and M. Kamaraj, 'An analysis of high-temperature crack growth in type 308 Cb stainless steel and its weldment,' Transactions of the ASME, Journal of Pressure Vessel Technology, Vol. 113, No. 4, pp. 538-541, 1991 https://doi.org/10.1115/1.2928792
- K. B. Yoon and A. Saxena, 'Creep crack growth and creep-fatigue crack growth data collection for low alloy steel,' Georgia Institute of Technology, Report submitted to The Matehals Properties Council Inc., February 13, 2002
- K. B. Yoon and A. Saxena, 'Assessment of defects in high temperature components' : Part II Creep crack growth analysis of surface cracks in a pressurized cylinder, Georgia Institute of Technology, Report submitted to The Materials Properties Council, 2002
- G. A. Webster and R. A. Ainswoith, High Temperature Component Life Assessment, Chapman & Hall. 1994
- D. 0. Harris, C. H. Wells, H. J. Grunloh, R. H. Ryder, J. M. Bloom, C. C. Schultz and R. Viswanathan, BLESS: Boiler Life Evaluation and Simulation System, A Computer Code for Relia-bility Analysis of Headers and Piping , Reliability and Risk in Pressure Vessels and Piping, ASME PVP Vol. 251, pp. 17-26, 1993
- D. 0. Harris, 'Probabilistic Fracture Mechanics with Applications to Inspection Planning and Design Reliability Technology,' ASME AD Vol. 28 pp. 57-76, 1992
- A. Saxena, J. Han and K. Banerji, 'Creep Crack Growth Behavior in Power Plant Boiler and Steam Pipe Steels,' Transactions of the ASME, Journal of Pressure Vessel Technology, Vol. 110, pp. 13 7-146, 1998