한국안전학회지 (Journal of the Korean Society of Safety)

  • 제17권1호
  • /
  • Pages.1-5
  • /
  • 2002
  • /
  • 1738-3803(pISSN)
  • /
  • 2383-9953(eISSN)
한국안전학회 (The Korean Society of Safety)
권호 표지

음향방출특성에 의한 탄소섬유강화 복합재의 손상파괴거동에 관한 연구

Study on Evaluating the Damage Fracture Behavior of the Carbon Fiber Reinforced Composite Material by Acoustic Emission Characteristics

  • 권오현 (부경대학교 안정공학과)
  • Kwon, Oh-Hyun (Department of safety engineerin, Pukyong National University)
  • 발행 : 2002.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

An approach for the damage of delamination which is the major concern during mechanical working for composite laminate material is proposed based on linear elastic fracture mechanics. This paper presents method evaluating of damage crack length using by average thrust force with AE characteristics. Also, the relations of AE characteristics are obtained from delamination damages. We found the onset ply of the delamination and a critical energy release rate and expressed a stress intensity factor by AEcount equation.

키워드

참고문헌

  1. Ho-Cheng, H. and Dharan, C. K. H., 'Delamination during drilling in composites,' Trans. ASME, Vol. 112, pp. 236~239, 1990 https://doi.org/10.1115/1.2899580
  2. Jain, S. and yang, D. C. H., 'Delamination free drilling of composite laminates,' Jour. of Engineer-ing for Indushy, Vol. 116, pp. 475-481, 1994
  3. Blanchette, Y. and Dickson, J. I., 'The use of acous-tic emission to evaluate critical values of K and J in 7075-T6H aluminium alloy,' Engineering Frac-ture Mechanics, Vol. 20, No. 2, pp. 359-371, 1984 https://doi.org/10.1016/0013-7944(84)90140-1
  4. Chen, W. C., 'Some experimental evaluations in the drilling of caibon fiber reinforced plastics composite laminates,' Int. Jour. Machine Tools and Manulac-turing, Vol. 37, No. 8, pp. 1097~1108, 1997 https://doi.org/10.1016/S0890-6955(96)00095-8
  5. Kanninen, M. F. and Popelar, C. R, Advanced Frac-ture Mechanics, Oxford Press, pp. 38~39, 1985
  6. Timosehenko, S. and Woinowsky-keiger, S., Theory of Plates and Shells, 2nd, MacGraw Hill, pp. 51~59, 1959
  7. Timosehenko, S. and Woinowsky-keiger, S., Theory of Plates and Shells, 2nd, MacGraw Hill, pp. 376~377, 1959
  8. Dungegan, H. L., harris, D. O. and Tatro, C. A., 'Fracture analysis by use of acoustic emission,' En-gineering Fracture mechanics, Vol. 1, pp. 105~122, 1968 https://doi.org/10.1016/0013-7944(68)90018-0
  9. Annual Book of Standards - Non Destnictive Test-ing, E976-94, Standard Guide for Determining the Reproducitality of Acoustic Emission Sensor response, Vol. 3.03, ASTM, Philadelphia, pp. 374~379, 1994