한국세라믹학회지 (Journal of the Korean Ceramic Society)

  • 제39권11호
  • /
  • Pages.1074-1082
  • /
  • 2002
  • /
  • 1229-7801(pISSN)
  • /
  • 2234-0491(eISSN)
한국세라믹학회 (The Korean Ceramic Society)
권호 표지
DOI QR코드

DOI QR Code

PMN-PT-BT/Ag/MgO 나노복합체의 제조 및 유전 특성

Preparation of PMN-PT-BT/Ag/MgO Nanocomposite and Dielectric Properties

  • 정순용 (한국과학기술연구원 재료연구부) ;
  • 임경란 (한국과학기술연구원 재료연구부) ;
  • 남산 (고려대학교 재료공학과)
  • Jeong, Soon-Yong (Division of Materials Science and Engineering, KIST) ;
  • Lim, Kyoung-Ran (Division of Materials Science and Engineering, KIST) ;
  • Nahm, Sahn (Department of Materials Science and Engineering, Korea University)
  • 발행 : 2002.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

소결온도가 $1200{\circ}C$인 PMN-PT-BT에 소량의 $AgNO_3$와 MgO 졸을 첨가하여 $950{\circ}C$ 소결로 PMN-PT-BT/Ag/MgO 나노복합체를 제조하였다. Modified mixed oxide 방법으로 제조된 저온 소결용 PMN-PT-BT/Ag 분말을 $600{\circ}C$/1h 하소한 다음 MgO 졸을 0-1.0wt% 첨가하여, 산소 분위기에서 $850-950{\circ}C$에서 4시간 소결하여 MgO 졸의 첨가량과 소결온도에 따른 미세구조의 발달과 유전특성을 조사하였다. MgO 졸이 0.5wt% 첨가되고, $950{\circ}C$에서 소결하여 얻은 PMN-PT-BT/Ag/MgO(0.5wt%) 소결체는 $1-3{\mu}m$의 입의 크기에 $0.1-0.3{\mu}m$의 MgO가 2차상을 입경, 삼중접, 입내에 분포되어 있음을 SEM으로 볼 수 있었으며, Ag는 SIMS로 << $1{\mu}m$로 분포되어 있음을 정성적으로 확인하였다. 상대소결밀도 99%, 실온유전율 17200, 유전손실 2.1%, 비저항 $5.46{\times}10^{12}{\Omega}{\cdot}cm$의 특성을 나타내었다. 그러나 MgO 졸이 첨가되지 않은 PMN-PT-BT/Ag/MgO(0 wt%)의 $950{\circ}C$ 소결체는 상대 소결밀도 99.5%, 상온유전율 19500, 유전손실 2.1%, 비저항 $7.30{\times}10^{12}{\Omega}{\cdot}cm$의 좀더 높은 특성을 나타내었다.

Nanocomposite PMN-PT-BT/Ag/MgO was prepared by sintering at $950{\circ}C$ with addition of $AgNO_3$ and MgO sol to the PMN-PT-BT powder sinterable at $1200{\circ}C$. The low-temperature-sinterable PMN-PT-BT/Ag powder prepared by the modified mixed oxide method was calcined at $600{\circ}C$ for 1h and surface modified with the MgO sol of 0-10 wt% and then subjected to consolidation at $850-950{\circ}C$ for 4h under a flowing oxygen. The nanocomposite PMN-PT-BT/Ag/MgO(0.5wt%) sintered at $950{\circ}C$ showed the microstructure with grains of $1-3{\mu}m$, the second phase of MgO of $0.1-0.3{\mu}m$ by SEM and Ag of << $1{\mu}m$ qualitatively by SIMS. It showed the sintered relative density of 99%, the room temperature dielectric constant of 17200, the dielectric loss of 2.1% and the specific resistivity of $5.46{\times}10^{12}{\Omega}{\cdot}cm$. But the PMN-PT-BT/Ag/MgO(0 wt%) nanocomposite sintered at $950{\circ}C$ showed a little better properties : the sintered relative density of 99.5%, the room temperature dielectric constant of 19500, the dielectric loss of 2.1% and the specific resistivity of $7.30{\times}10^{12}{\Omega}{\cdot}cm$.

키워드

참고문헌

  1. L. E. Cross, 'Relaxor Ferroelectrics,' Ferroelectrics, 76 241-67 (1987) https://doi.org/10.1080/00150198708016945
  2. S. Nomura and K. Uchino, 'Electrostrictrve Effect in Pb($Mg_{1/3}Nb_{2/3}$)$O_3$-type Materials,' Ferroelectrics, 41 117-32 (1982) https://doi.org/10.1080/00150198208210614
  3. K. Uchino, 'Electrosthctive Actuators: Materials and Applications,' Am. Ceram. Soc. Bull., 65 [4] 647-56 (1986)
  4. S. L. Swartz and T. R. Shrout, 'Fabrication of Perovskite Lead Magnesium Niobate,' Mater. Res. Bull., 17 1245-50 (1982) https://doi.org/10.1016/0025-5408(82)90159-3
  5. M. F. Yan, H. C. Ling and W. W. Rhodes, 'Effects of Dopants on PbO-MgO-$Nb_2O_5$ Ceramics Near the Pb($Mg_{1/3}Nb_{2/3}$)$O_3$ Composition,' J. Mater. Res., 4 945-66 (1989) https://doi.org/10.1557/JMR.1989.0945
  6. Y. S. Cho, S. M. Pilgrim and H. Giesche, 'Dielectric and Electro mechanical Properties of Chemically Modified PMN PT BT Ceramics,' J. Am. Ceram. Soc., 83 [10] 2473-80 (2000) https://doi.org/10.1111/j.1151-2916.2000.tb01578.x
  7. K. R. Han, S. Kim and H. J. Koo, 'New Preparation Method of Low temperature sinterable Perovskite 0.9Pb($Mg_{1/3}Nb_{2/3}$)$O_3$-O.lPbTi$O_3$ Powder and its Dielectric Properties,' J. Am. Ceram. Soc., 81 [11] 2998-3000 (1998) https://doi.org/10.1111/j.1151-2916.1998.tb02725.x
  8. U. Syamaprasad, A. R. Sheeja Nair, M. S. Sarma, P. Guru swamy, P. S. Mukherjee, L. Krishnamurthy, M. Achuthan and A. D. Damodaran, 'Multilayer Capacitor Ceramics in the PMN PT BT System : Effect of MgO and 4PbO $B_2O_3$ Addition,' J. Mater. Sci., : Materials in EIectronics, 8 199-205 (1997) https://doi.org/10.1023/A:1018554431950
  9. M. R. Winter, S. M. Pilgrim and M. Lejeune, 'Study on the Effect of Lanthanum Doping on the Microstructure and Dielectric Properties of 0.9Pb($Mg_{1/3}Nb_{2/3}$)$O_3$-0. 1PbTi$O_3$,' J. Am. Ceram. Soc., 84 [2] 314-20 (2001) https://doi.org/10.1111/j.1151-2916.2001.tb00656.x
  10. H. J. Hwang, T. Nagai, T. Ohji, M. Sando, M. Toriyama and K. Niihara, 'Curie Temperature Anomaly in Lead Zirconate Titanate/Silver Composites,' J. Am. Ceram. Soc., 81 [3] (1998)
  11. Y. Sato, H. Kanai and Y. Yamashita, 'Effects of Silver and Palladium Doping on the Dielectric Properties of 0.9Pb ($Mg_{1/3}Nb_{2/3}$)$O_3$-0.1PbTi$O_3$ Ceramic,' J. Am. Ceram. Soc., 79 [1] 261-65 (1996) https://doi.org/10.1111/j.1151-2916.1996.tb07907.x
  12. K. R. Han, S. Jeong and C. S. Kim, 'Preparation of PMN PT BT Powder by Modified Mixed Oxide Method and Effect of Ag on Dielecthc Properties,' J. Kor. Ceram. Soc., 39 [2] 159-63 (2002) https://doi.org/10.4191/KCERS.2002.39.2.159
  13. K. R. Han, S. Jeong and C. S. Kim, 'Preparation of PMN PT BT/Ag Composite and its Mechanical and Dielectric Properties,' J. Kor. Ceram. Soc., Accepted
  14. K. Niihara, H. J. Hwang, K. Tajima and M. Sando, 'PZT Nanocomposites Reinforced by Small Amount of Oxides,' J. Euro. Ceram. Soc., 19 1179-82 (1999) https://doi.org/10.1016/S0955-2219(98)00399-9
  15. T. Nagai, H. J. Hwang, M. Yasuoka, M. Sando and K. Nii hara, 'Preparation of a Barium Titanate dispersed magnesia Nanocomposite,' J. Am. Ceram. Soc.. 81 [2] 425-28 (1998) https://doi.org/10.1111/j.1151-2916.1998.tb02352.x
  16. H. J. Hwang, T. Nagai, M. Yasuoka, M. Sando and K. Nii hara, 'Fabricaion of Piezoelectric Pardcle dispersed Ceramic Nanocomposite,' J. Euro. Ceram. Soc., 19 993-97 (1999) https://doi.org/10.1016/S0955-2219(98)00360-4
  17. T. Nagai, K. Iijima, H. J. Hwang, M. Sando, T. Sekino and K. Niihara, 'Effect of MgO Doping on the Phase Trans formations of BaTi$O_3$,' J. Am. Ceram. Soc., 83 [1] 107-12 (2000) https://doi.org/10.1111/j.1151-2916.2000.tb01156.x
  18. K. Niihara, H. J. Hwang, K. Watari, M. Sando and M. Toriyama, 'Low temperature Sintering and High strength Pb(Zr,Ti)$O_3$ matrix Composites Incorporating Silver Parti cle,' J. Am. Ceram. Soc., 80 [3] 791-93 (1997) https://doi.org/10.1111/j.1151-2916.1997.tb02901.x
  19. K. Niihara, H. J. Hwang, M. Yasuoka, M. Sando and M. Toriyama, 'Fabrication, Sinterability and Mechanical Properties of Lead Zirconate Titanate/Silver Composites,' J. Am. Ceram. Soc., 82 [9] 2417-22 (1999) https://doi.org/10.1111/j.1151-2916.1999.tb02099.x
  20. K. Niihara, H. J. Hwang, K. Tajima, M. Sando and M. Toriyama, 'Fatigue Behavier of PZT based Nanocomposites with Fine Platinum Particles,' J. Am. Ceram. Soc., 81 [12] 3325-28 (1998)
  21. J. Li, K. Takagi, N. Terakubo and R. Watanabe, 'Electrical and Mechanical Properties of Piezoelectric Ceramic/Metal Composites in the Pb(Zr,Ti)$O_3$/Pt System,' Appl. Phys. Lett., 79 [15] 2441-43 (2001) https://doi.org/10.1063/1.1403662

피인용 문헌

  1. Synthesis of nanocomposites of PMN-PT-BT with metal oxides via surface modification vol.17, pp.2-4, 2006, https://doi.org/10.1007/s10832-006-9387-1