References
- D. B. Marshall and M. V. Swanin, 'Crack Resistance Curves in Magnesia-partially-stabilized Zirconia,' J. Am. Ceram. Soc., 71 [6] 399-407 (1988) https://doi.org/10.1111/j.1151-2916.1988.tb05885.x
- T. Sornakumar, 'Advanced Ceramic-cerainic Composite Tool Materials for Metal Cutting Application,' Key Engi-neering Materials, 114 173-88 (1996) https://doi.org/10.4028/www.scientific.net/KEM.114.173
- R. F Krause, Jr., E. R. Fuller, Jr. and J. F. Rhodes, 'Fracture Resistance Behavior of Silicon Carbide Whisker-reinforced Alumina Composites with Different Porosities,' J. Am Ceram. Soc., 73 [3] 559-66 (1990) https://doi.org/10.1111/j.1151-2916.1990.tb06553.x
- J. Homeny and W. L. Vaughn, 'R-curve Behavior in a Sil-icon Carbide Whisker-alumina Matrix Composite,' J. Am. Cerm. Soc., 73 [7] 2060-62 (1990) https://doi.org/10.1111/j.1151-2916.1990.tb05267.x
- K. Niihara and A. Nakahira. 'Particles-strengthened Oxide Ceramics, Nanocomposites,' pp. 637-64 in Advanced Struc-tural Inorganic Composites. Ed. by p. Vincentini. Elsevier Science Publishers, Trieste, Italy (1990)
- K. Niihara and A. Nakahira, 'Strengthening and Tough-ening Mechanisms in nanocomposite Ceramics,' Ann. Chim. (Paris), 16 479-86 (1991)
- W-J. Kim, Y-G. Lee, W-S. Cho and S-W. Choi, 'Mechanical Properties and Microstructures of Self-toughened Silicon Nitride Ceramic Prepared by Microsturctural Control(in Kor.),' J. Kor. Ceram. Soc., 36 [4] 432-43 (1999)
- C. W. Li and J. Yamanis, 'Super-Tough Silicon Nitride with R-curve Behavior,' Ceram. Eng. Sic. Proc., 10 [7-8] 632-45 (1989) https://doi.org/10.1002/9780470310557.ch10
-
K. S. Park, S. W. Lee and J. H. Lee, 'R-curve Behavior of Particulate Composites of
$Al_2O_3$ containing SiC and$ZrO_2$ : I.Experiment(in Kor.),' J. Kor. Ceram. Soc., 37 [4] 359-67 (2000) -
S. W. Na and J. H. Lee, 'R-curve Behavior of Pardculate Compo- sites of
$Al_2O_3$ Containing SiC and$ZrO_2$ : II. TheoreticalAnalysis(in Kor.),' J. Kor. Ceram. Soc., 37 [4] 368-75 (2000) - H. Endo, M. Ueki and H. Kubo, 'Microstructure and Mechanical Properties of Hot-pressed SiC-TiC Compos-ites,' J. Mat. Sci., 26 3769-74 (1991) https://doi.org/10.1007/BF01184969
-
C. H. McMurtry, W. D. G. Boecker, S. G. Seshadii, J. S. Zanghie and J. E. Garnier, 'Microstructure and Material Properties of SiC-
$TiB_2$ Particulate Composites,' Am. Ceram. Soc. BuIl, 66 [2] 325-29 (1987) - K. T. Faber and A. G. Evans, 'Crack Deflection Processes-I. Theory,' Acta Metall., 31 [4] 565-76 (1983) https://doi.org/10.1016/0001-6160(83)90046-9
- K. T. Faber and A. G. Evans, 'Crack Deflection Processes-II. Experiment,' Acta Metall., 31 [4] 577-84 (1983) https://doi.org/10.1016/0001-6160(83)90047-0
-
S. J. Benjamin and M. P. Harmer, 'A History of the Role of MgO in the Sintering of
$\alpha-Al_2O_3$ ,' Ceram. Transactions, 713-49 (1990) - R. F. Krause, Jr., 'Rising Fracture Toughness from the Bending Strength of Indented Alumina Beams,' J. Am. Ceram. Soc., 71 [5] 338-42 (1988) https://doi.org/10.1111/j.1151-2916.1988.tb05051.x
- K. Yasuda, J. Tatami, Y. Matsuo and S. Kimura, 'Stochastic Analysis for Influence of Grain Size on Fraction of Trans-granualar Fracture in Poly Crystalline Ceramics(in Jpn.),' J. Ceram. Soc. Jpn., Int. Edition, 10 885-88 (1994)
-
S. W. Na, S. W. Lee and J. H. Lee, 'Crack Bridging Phenomena in
$Al_2O_3$ /SiCp Composites,' Proceedings of the 17th Intema-tional Korea-Japan Seminar on Ceramics., 421-25 (2000) - P. Chantikul, S. J. Bennison and B. R. Lawn, 'Role of Grain Size in the Strength and R-curve Properties of Alumina,' J. Am. Ceram. Soc., 73 [8] 2419-27 (1990) https://doi.org/10.1111/j.1151-2916.1990.tb07607.x
- J. Selsing, 'Internal Stresses in Ceramics,' J. Am. Ceram. Soc., 44 [8] 419 (1961) https://doi.org/10.1111/j.1151-2916.1961.tb15475.x
-
I. A. Chou, H. M. Chan and M. P. Harmer, 'Machining-induced Surface Residual Stress Behavior in
$Al_2O_3$ -SiC Nanocomposites,' J. Am. Ceram. Soc., 79 [9] 2403-09 (1996) https://doi.org/10.1111/j.1151-2916.1996.tb08989.x