References
- W. B. Hillig, 'Melt Infiltration Approach to Ceramic Matrix Composites,' Comm. Am. Ceram. Soc., 71 [2] C96-C9(1988)
- W. B. Hillig, 'Ceramic Composites by Infiltration,' Ceram. Eng. Sci. Proc., 6 674-83 (1985)
- D.-J. Kim, M.-H. Lee and C.-E. Kim, 'Mechanical Prop-erties of Tape-cast Alumina-glass Dental Composites,' J. Am. Ceram. Soc., 82 [11] 3167-72 (1999) https://doi.org/10.1111/j.1151-2916.1999.tb02219.x
- W. D. Wolf, L. F.Francis, C.-P. Lin and W. H. Douglas, 'Melt-infiltration Processing and Fracture Toughness of Alumina-glass Dental Composites,' J. Am. Ceram. Soc., 76 [1O] 2691-94 (1993)
- H. Hornberger, Strength Microstructure Relationships in a Dental Alumina Glass Composite, Ph.D. Dissertaion, University of Birmingham, 1995
-
D. Y. Lee, J.-W. Jang, B.-S. Kim, D.-J. Kim and Y.-S. Song, 'Kinetic Study of
$La_2O_3-Al_2O_3-SiO_2$ Glass Infiltration into Spinel Preforms(in Kor.),' J. Kor. Crystal Growth and Crys tal Technol., 12 [1] 31-5 (2002) - D. Y. Lee, D.-J. Kim and Y.-S. Song, 'Properties of Glassspinel Composites Prepared by Melt Infiltration,' J. Mater. Sci. Lett., 21 [15] 1223-26 (2002) https://doi.org/10.1023/A:1016528720776
- D. Y. Lee, J.-W. Jang, D.-J. Kim, I.-S. Park, J.-K. Lee, M.-H. Lee and B.-Y. Kim, 'Glass-alumina Composites Prepared by Melt-infiltration: I. Effect of Alumina Particle Size,' J. Kor. Ceram. Soc., 38 [9] 799-805 (2001)
- D. Y. Lee, J.-W. Jang, M.-H. Lee, J.-K. Lee, D.-J. Kim and I.-S. Park, 'Glass-alumina Composites Prepared by Meltinfiltration: II. Kinetic Studies,' J. Kor. Ceram. Soc., 39 [2] 145-52 (2002) https://doi.org/10.4191/KCERS.2002.39.2.145
- E. Ryshkewitch, Oxide Ceramics; pp. 257-60, Academic Press, New York, 1960
-
H. C. Park, Y. B. Lee, K. D. Oh and F. L. Riley, 'Grain Growth in Sintered
$ Spinel,' J. Mater. Sci. Lett., 16 1841-44 (1997) https://doi.org/10.1023/A:1018585105949$MgAl_2O_4$ $ - C.-J. Ting and H.-Y. Lu, 'Hot-pressing of Magnesium Aluminate Spinel-I. Kinetics and Densification Mechanism,' Acta Mater., 47 [3] 817-30 (1999) https://doi.org/10.1016/S1359-6454(98)00400-5
- C.-J. Ting and H.-Y. Lu, 'Hot-pressing of Magnesium Aluminate Spinel-I. Microstructure Development,' Acta Mater., 47 [3] 831-40 (1999) https://doi.org/10.1016/S1359-6454(98)00401-7
- A. Granon, P. Goeuriot and F. Thevenot, 'Aluminum Magnesium Oxynitride: A New Transparent Spinel Ceramic,' J. Eur. Ceram. Soc., 15 249-54 (1995) https://doi.org/10.1016/0955-2219(95)93946-Z
-
V. Montouillout, D. Massiot, A. Douy and J. P. Coutures, 'Characterization of
$ Precursor Powders Prepared by Aqueous Route,' J. Am. Ceram. Soc., 82 [12] 3299-304 (1999) https://doi.org/10.1111/j.1151-2916.1999.tb02243.x$MgAl_2O_4$ $ - R. Sarkar, S. K. Das and G. Banenee, 'Effect of Attritor Milling on the Densification of Magnesium Aluminate Spinel,' Ceram. Intl., 25 485-89 (1999) https://doi.org/10.1016/S0272-8842(98)00065-0
- D. Y. Lee, B.-Y. Kim and D.-J. Kim, 'Effect of Calcination Temperature on Glass Infiltration Rate of Spinel/Zirconia Preforms,' Intl. Conference on Modern Materials & Techno1ogies(CIMTEC 2002), Florence, Itlay, July 15, 2002
-
D. Y. Lee, D.-J. Kim and B.-Y. Kim, 'Influence of Alumina Particle Size on Fracture Toughness of (Y,Nb)-TZP/
$Al_2O_3$ Composites,' J. Eur. Ceram. Soc., 22 [13] 2172-79 (2002) -
D. Y. Lee, J.-W. Jang and D.-J. Kim, 'Raman Spectral Characterization of Existing Phases in the
$ System,' Ceram. Intl., 27 [3] 291-98 (2001) https://doi.org/10.1016/S0272-8842(00)00079-1$ZrO_2-Y_2O_3Nb_2O_5$ $ -
D. Y. Lee, D.-J. Kim and D.-H. Cho, 'Low-temperature Phase Stability of
$Y_2O_3$ and$Nb_2O_5$ Co-doped TZP Ceramics' J. Mater. Sci. Lett., 17 [3] 185-87 (1998) https://doi.org/10.1023/A:1006567808134 - Standard Test-method for Biaxial Flexure Strength (Modulus of Rupture) of Ceramic Substrates, ASTM Designation F 394-78, Annual book of ASTM Standards Vol. 15.02, Secdon 15, 446-50. American Society for Testing and Materials, Philadelphia, PA, 1996
- International Standard of Implants for Surgery-ceramic Materials Based on High Purity Alumina, ISO 6474:1994(E), Geneve, Switzerland
- P. Chantikul, G. R. Anstis, B. R. Lawn and D. B. Marshall, 'Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: II. Strength Method,' J. Am. Ceram. Soc., 64 [9] 539-43 (1981) https://doi.org/10.1111/j.1151-2916.1981.tb10321.x
-
D. Y. Lee, D.-J. Kim, M.-H. Lee and J.-W. Jang, 'Flaw Tolerance of (Y,Nb)-TZP/
$Al_2O_3$ Composites,' J. Kor. Ceram. Soc., 38 [1] 56-60 (2001) - S. Taruta, K. Kawashima, K. Kitajima, N. Takusagawa, K. Okada and N. Otsuka, 'Influence of Zirconia Addition on the Sintering Behavior of Bimodal Size Distributed Alumina Powder Mixtures(in Jpn.),' J. Ceram. Soc. Jpn., 102 [2] 139-44 (1994) https://doi.org/10.2109/jcersj.102.139
- D. P. Hasselman and R. M. Fulrath, 'Proposed Fracture Theory of a Dispersion-strengthened Glass Matrix,' J. Am. Ceram. Soc., 49 [2] 68-72 (1966) https://doi.org/10.1111/j.1151-2916.1966.tb13210.x