Abstract
As cross-coupling capacitance generated in transmission line has been an important issue in VLSI world, a couple of ATPG algorithms has been proposed. However they were studied only for a simple single-line effect problem, so it cost so much time for an unsatisfying test generation efficiency. In this paper, we studied a noise model for multiple affected lines and generated test patterns in a short time. This paper proposes a crosstalk model affected by multiple tranmission lines and implemented an ATPG algorithm for detection of crosstalk noise faults. We modeled the crosstalk noise by multiple transmission line and made a truth table for this. We implemented an ATPG algorithm based on PODEM and revealed the results.
VLSI 영역에서 전송선에 발생하는 상호교차 커패시턴스(cross-coupling capacitance)가 중요한 이슈가 됨에 따라 이로 인한 고장을 검출하는 몇 가지 ATPG 알고리즘이 제안되었다. 대부분 단일한 능동선로만을 대상으로 연구가 진행되었으며, 테스트 생성 효율에 비해 많은 시간비용을 감수해야 하는 결과를 내 놓을 수 밖에 없었다. 이에 대한 대안으로 본 논문에서는 다중 선로를 대상으로 하는 잡음 모델에 관해 연구하였다. 본 논문은 다수의 전송선에 영향을 받는 crosstalk 모델을 제시하고 이 모델에 따라 crosstalk 잡음 고장 검출을 목적으로 하는 ATPG 알고리즘을 제안한다. 이 논문에서는 crosstalk에 의한 잡음 고장을 정적 해저드로 조건을 설정하고, 각 게이트에 따라 이 조건을 만족하는 진리표를 만들 것이다. 그 후 PODEM에 기반한 ATPG 알고리즘을 구현한 후 그 결과를 보인다.