접착 및 계면 (Journal of Adhesion and Interface)
- 제3권2호
- /
- Pages.1-8
- /
- 2002
- /
- 1229-9243(pISSN)
- /
- 2233-8217(eISSN)
One-Shot법을 이용한 폴리우레탄계 유겔화제의 특성
Oil Gelling Agents made from Polyurethane by One-Shot Method
- Kim, Dongsung (Department of Chemical Engineering, Busan National University) ;
- Kim, Wonho (Department of Chemical Engineering, Busan National University)
- 투고 : 2001.09.20
- 심사 : 2001.11.20
- 발행 : 2002.06.21
초록
물과의 발포반응에 의해 유츌유를 겔화할 수 있는 폴리우레탄 NCO prepolymer를 제조하기 위하여 폴리올(PTMG 및 GP)과 이소시아네이트(TDI)를 사용하여 NCO prepolymer를 합성하였다. 폴리올 각각의 분자량에 따라 합성한 NCO prepolymer를 이용하여 초기 유출유와 에멀젼된 유출유 그리고 유출유의 종류에 따라 유겔화율을 측정하였다. Bunker B 초기 유출유에 대하여 3관능성 폴리오인 GP1000의 경우 440%의 유겔화율은 나타내었으며, 유출유와 해수가 에멀젼(emulsion)된 상태에서는 2배 정도가 증가한 958%의 유겔화율을 나타내었다. 또한 Bunker B에 비해 점도가 높은 Bunker C의 에멀젼된 상태에서는 1098%의 유겔화율을 나타내었다. 사슬연장제가 투입된 2관능성 폴리올인 PTMG1000의 경우에는 에멀젼된 Bunker B에 대하여 910%의 유겔화율을 나타내었으며, 에멀젼된 Bunker C에 대하여 923%의 유겔화율을 나타내었다. 3관능성 폴리올을 사용하여 제조된 NCO prepolymer의 경우, 형성된 폴리우레탄 겔은 부드럽고 강한 특성을 가져 회수에 용이한 상태를 나타내었다.
Polyurethane NCO prepolymers were synthesized with the polyols such as PTMG, GP and the isocyanate such as TDI at