Simplified Formulae for Free Earth Supported Anchored Sheet-Pile Wall

앵커식 자유지지 널말뚝벽의 설계용 간편식

  • 김기웅 (시립인천전문대학 토목과) ;
  • 권민석 (경희대학교 대학원 토목공학과) ;
  • 백영식 (경희대학교 토목건축공학부)
  • Received : 2002.06.11
  • Published : 2002.09.01

Abstract

Sheet piles are often used to build continuous walls for the waterfront structures, and also used for some temporary structures, such as the braced cuts. Sheet pile walls may be divided into two basic categories that is cantilever and anchored. Stock(1992) developed an expedient format for determining the depth, maximum bending moment and anchor force of sheet pile wall for cantilever and free earth supported anchored wall. But, that is useful only in case that water table exists above the dredge line. In this study, a simplified formulae was developed for the design of the anchored free earth supported sheet pile wall both in sand and clay by solving the derived equations and regression analysis. It can be used whether the ground water table is above or under the dredge line.

널말뚝의 보다 편리한 설계를 위하여 지하수위가 굴착선 위에 있을 때 설계시 수계산을 하지 않고 근입깊이, 앵커장력, 그리고, 최대 휨모멘트를 구할 수 있는 설계용 도표가 개발되어 있다. 그러나 기존의 설계용 도표는 지하수위가 굴착선 위에 있을 경우와 앵커의 설치위치와 단위중량비가 제한적인 경우(Stock, 1992)에 한하여 개발되어 있어 설계에 많은 제약을 받는다. 다양한 설계조건에서도 설계에 편리하게 이용할 수 있는 간편식을 개발하였다. 널말뚝의 기하학적 조건과 흙의 토성치를 변화시켜 근입깊이, 앵커장력 그리고 최대 휨모멘트 등의 결과값을 얻어 이를 회귀분석을 통하여 사용하기 편리한 간편식을 개발하였다.

Keywords