참고문헌
- Huzel, D.K and Huang, D.H., Modem engineering for design of liquid-propellant rocket engines, American Institute of Aeronautics and Astronautics, Inc., 1992.
- Sutton, G.P. and Ross, D.M., Elements: the engineering of rockets, John Wiley & Sons, Inc., 1976.
- Gill, G.S. and Nurick, W.H., Liquid rocket engine injectors, NASA Space Vehicle Design Criteria (Chemical), NASA SP-8089, NASA Lewis Research Center, Mar 1976.
- Kim, Y -M. and Oh, S.-H., "Computations of the three -dimensional flow field in a tube with sudden contraction (in Korean)," J of the Korean Society Aeronautical Space Sciences, Vol. 25, No. 1, 1997, pp.25-34.
- Kim, Y.-M., "Numerical study on the characteristics of the flow through injector orifice by multi-block computations (in Korean)," Trans. Korea Soc. Mech Engng. B, Vol. 21, No. 3, 1997, pp.414-426.
- Rho, B.J., Oh, J.H., Kang, S.J., Park, S.M. and Kwon, K.C., "A study on atomization characteristics of the double impinging F-O -O -F type injector with four streams for liquid rocket, (in Korean )," J of the Korean Society Aeronautical Space Sciences, Vol. 27, No.7, 1999, pp.112-120.
- Cho, W.K., "Flow analysis in fuel injectors of a liquid rocket (in Korean)," J of the Korean Society of Aeronautical and Space Sciences, Vol.28 No.8, 2000, pp.115-121.
- Chae, Y.S. et aI., Research and development of KSR-III (III) (in Korean), Vol. 1, Korea Aerospace Research Institute, 2000.
- Ferziger, J.H . and Peric, M, Computational methods for fluid dynamics, Springer-Verlog, 1996.
- Hur, N., Cho, W.K, Yoon, S.Y and Kim, K.H., "A study on the development of general purpose program for the analysis of 3-D fluid flow by using a general non-orthogonal grid sys tem (in Korean )," Trans. Korea Soc. Mech Engng., Vol. 18, No. 12, 1994, pp.3345-3356.
- Leonard, B.P., A stable and accurate convective modelling procedure based on quadratic upstream interpolation, Computer Methods in Applied Mechanics and Engineering, Vol.19, 1979, pp.59-98. https://doi.org/10.1016/0045-7825(79)90034-3
- Park, B.S., Sung, H.J. and Chung, M.K, "Experimental study on the turbulent flow field in a sudden expan sion-contraction pipe joint (in Korean )," Trans. Korea Soc. Mech Engng., Vol. 13, No.6, 1989, pp.1269-1281.
- Jang, H.C., Sung, H.J. and Choi, H.O., "Curvature-dependent two-equation model for turbulent sudden expansion-contraction pipe joint flows (in Korean)," Trans. Korea Soc. Mech Engng., Vol. 15, No. 5, 1991, pp.1747-1755.
피인용 문헌
- Cavitating Flow in an Impinging-type Injector vol.31, pp.5, 2003, https://doi.org/10.5139/JKSAS.2003.31.5.080