DOI QR코드

DOI QR Code

벼의 함수율에 따른 도정수율의 변화

Milled Rice Recovery Rate of Paddy with Various Moisture Contents

  • 발행 : 2002.04.01

초록

In order to investigate the optimum moisture content of paddy for milling process, a series of tests were conducted by examining the recovery rate and whiteness of milled rice in relation with the various moisture content. Hwabong-byeo and Dongjin-byeo varieties which were major paddies cultivated in Korea were used for the experiment. The test was performed with small experimental milling machines. In order to minimize the unexpected factors, environment conditions were kept in constant during the experiment. As a result, the recovery rate of milled rice were varied as the changes in milling time and degree of whiteness. However, the recovery rate of milled rice increases as its moisture content increases untill a certain point of moisture content and decreases slowly afterward. This certain point can be called optimum moisture content for rice milling. Also, it has a different value depending on the variety. In this experiment, optimum moisture content of Hwabong-byeo and Dongjin-byeo were considered around 14.8% and 15.3%, respectively. It is not sure that these optimum moisture contents for the two varieties would assume the same values irrespective of harvest year and place. However, it could be concluded that the optimum moisture content for rice milling is around 15%(w.b.) for Hwabong-byeo and 15.5%(w.b.) for Dongjin-byeo, respectively.

키워드

참고문헌

  1. 농산물검사소. 1985. 농산물검사 표준 계측방법 및 표준 감정 방법.
  2. 사다께연구소. 1998. 현백미 분석 및 최신 정미기술.
  3. 최태웅, 김완규, 국중락, 전경우. 1996. 농검시험소 시험과. 미곡도정수율 시험보고.
  4. Chung, D. S. and H. B. Pfost. 1967. Adsorption and desorption of water vapor by cereal grains and their products. Part II : Development of the general isotherm equation. Transactions of the ASAE. 10(4):552-555 https://doi.org/10.13031/2013.39727
  5. Keum, D. H., H. Kim and Y. K. Cho. 2000. Desorption equilibrium moisture content of rough rice, brown rice, white rice and rice hull. Journal of KSAM 25(1):47-54, (In Korean)
  6. Perry, R. H. 1985. Perry’s chemical engineers’ handbook. 6th ed.
  7. Lee, S. B., C. J. Chung and S. H. Noh. 1983. Study on the improvement of milling recovery and performance(V). Journal of KSAM 8(1): 17-29, (In Korean)
  8. 山村 周三. 1991. 米の搗精と精白米の品質および食味(4報). 最適搗精方法と最適玄米條件. 北海道大學邦文紀要 17(4):517-530.

피인용 문헌

  1. Varietal Difference of Eating Quality on Different Milling Degree in Japonica Rice vol.59, pp.1, 2014, https://doi.org/10.7740/kjcs.2014.59.1.047