Abstract
It is important to consider the effect of member size when estimating the ultimate strength of a concrete flexural member because the strength always decreases with an increase of member size. In this study, the size effect of a reinforced concrete (RC) beam was experimentally investigated. For this purpose, a series of beam specimens subjected to four-point loading were tested. More specifically, three different effective depth (d$\approx$15, 30, and 60 cm) reinforced concrete beams were tested to investigate the size effect. The shear-span to depth ratio (a/d=3) and thickness (20 cm) of the specimens were kept constant where the size effect in out-of-plane direction is not considered. The test results are curve fitted using least square method (LSM) to obtain parameters for the modified size effect law (MSEL). The analysis results show that the flexural compressive strength and the ultimate strain decrease as the specimen size increases. In the future study, since $\beta_1$ value suggested by design code and ultimate strain change with specimen size variation, a more detailed analysis should be performed. Finally, parameters for MSEL are also suggested.
철근콘크리트 보 단면의 극한강도를 예측할 때에는 부재의 크기를 고려하지 않는 것이 일반적이다. 그러나 부재 단면의 휨압 축강도는 부재의 크기가 증가함에 따라 항상 감소하게 된다. 본 연구에서는 철근콘크리트 보에 대한 실험적 고찰을 통해 휨압축강도의 크기효과를 살펴보고 이에 대한 적절한 모델식을 제시하고자 한다. 보의 유효깊이(d$\approx$15, 30, 60cm)를 주요 매개변수로 하였으며 전단스팬/유효깊이(a/d)는 3.0으로 하였고 시편의 폭은 20 cm로 일정하게 하여 휨하중을 가하며 실험을 수행하였다. 실험에서 구한 하중, 변형률, 및 보의 처짐 등을 이용하여 휨압축응력-변형률 관계를 3차의 비선형 다항식을 이용한 회귀분석을 수행하여 구하였다. 분석 결과 보의 유효깊이가 증가함에 따라 휨압축강도, 최대 휨압축응력에서의 변형률, 그리고 극한변형률이 감소하며 취성적인 파괴거동을 나타내었다. 그리고 설계기준에서 제시하고 있는 $\beta$l값과 보의 극한 변형률 값에 대해서도 크기효과가 있으므로 이에 대한 검토가 필요하다고 판단된다. 마지막으로 수정된 크기효과법칙을 사용하여 철근콘크리트 보의 휨압축강도에 대한 크기 효과모델식을 제시하였다.