Development of Load Prediction Equations of Office Buildings

  • Published : 2002.06.01

Abstract

The objective of this study is to evaluate the design parameters and to develop the cooling and heating load prediction equations of office buildings. The building load calculation simulation was carried out using the DOE-2.1E program. The results of the simulation were used as data for multiple regression analysis which could develop the load prediction equations.

Keywords

References

  1. Kim, K. S. all authers, 1993, Study on the improvement of energy standards for buildings, Report of the Ministry of Construc-tion, pp. 103-119
  2. Lee, M. H. all authers, 1994, Energy standards for commercial and office buildings, Report of the Ministry of Construction, pp. 11-20
  3. Park, S. H., 1994, Experimental design by Taguchi method, Youngji Inc., p. 21
  4. Peterson, J. L, jones, J. W. and Hunn, B. D., 1989, The Correlation of Annual Commercial Building Coil Energy with Envelope, Inter-nal Load, and Climatic Parameters, ASHRAE Transactions, Vol. 95, Part 1
  5. SAREK, 1990, Seoul Standard Weather Data, SAREK
  6. Seok, H. T., 1995, A Study on the design parameters evaluation for the office building thermal performance using the experimental design, Proceedings of the AIK, pp, 351-356
  7. Seok, H. T., 1995, A Study on the development of load prediction equation and design guidelines for the energy conservation of office buildings, Ph.D. thesis, Seoul National Univ., Seoul, Korea
  8. Shaviv, E. and Capeluto, I. G., 1992, The relative importance of various geometrical design parameters in a hot, humid climate, ASHRAE Trans., Vol. 98, pp. 589-605
  9. Sullivan, R., Nojaki, S., Johnson, R. and Selkowitz, S., 1985, Commercial Building Energy Performance Analysis Using Multiple Regression, ASHRAE Technical Data Bulletin
  10. Wilcox, B. A, 1991, Development of the Envelope Load Equation for ASHRAE Standard 90.1, ASHRAE Transactions, Vol. 97, Part 2