Restorative Dentistry and Endodontics

The Korean Academy of Conservative Dentistry (대한치과보존학회)
권호 표지
DOI QR코드

DOI QR Code

The effect of cavity configuration on the mechanical properties of resin composites

중합환경에 따른 복합레진의 물리적 성질에 관한 연구

  • Ryu, Gil-Joo (Department of Conservative Dentistry, College of Dentistry, Kyung Hee University) ;
  • Park, Sang-Jin (Department of Conservative Dentistry, College of Dentistry, Kyung Hee University) ;
  • Choi, Kyoung-Kyu (Department of Conservative Dentistry, College of Dentistry, Kyung Hee University)
  • 류길주 (경희대학교 치과대학 보존학교실) ;
  • 박상진 (경희대학교 치과대학 보존학교실) ;
  • 최경규 (경희대학교 치과대학 보존학교실)
  • Published : 2002.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

이 연구의 목적은 와동의 형태가 굴곡강도와 탄성계수 등 복합레진의 물리적 성질에 미치는 영향을 평가하는 것이다. 복합레진은 Clearfil$^{TM}$ AP-X(Kuraray, Japan)와 Esthet-X$^{TM}$(Dentsply, USA)가 이용되었으며, 상아질 접착제는 Clearfil$^{TM}$ SE Bond(Kuraray, Japan)와 Prime & Bond NT$^{TM}$(Dentsply, USA)를 사용하였다. 대조군의 시편은 split steel mold(25mm$\times$2mm$\times$2mm) 내에 상기 2종류의 복합레진을 충전하여 2개의 대조군 시편을 제작하였으며, 2.4 및 3.4의 C-factor를 부여하기 위한 유리 모형와동을 제작하고, 와동 내에 상기 2종류의 복합레진을 충전하기 전 유리와동의 내면은 sandblasting 처리하고 각각의 복합레진과 동일회사 제품의 상기 상아질 접착제로 처리한 후, 복합 레진을 각각 충전하여 4개의 실험군을 제작하였다. 제작된 실험군 시편은 저속 diamond saw로 충전된 복합레진 부위의 중심부를 통과하도록 절단하여 레진기둥(25mm$\times$2mm$\times$2mm)이 되도록 제작하였다. 제작된 시편을 37$^{\circ}C$의 증류수에 24시간 동안 보관 후, 만능시험기(EZ Test, Shimadzu, Japan)를 이용하여 분당 1mm의 crosshead speed로 3점 굴곡강도를 측정하였다. 또 Linometer(R&B, Korea)를 이용하여 복합레진의 중합수축량을 측정하였으며 굴곡강도측정 후 시편의 파단면은 주사전자현미경(S-2300, Hitachi, Japan)을 이용하여 관찰하였다. 실험결과의 통계분석은 95% 수준의 one-way ANOVA/Tukey's test를 이용하여 결과를 얻었다. 실험에 이용된 2종류 복합레진의 굴곡강도와 탄성계수는 C-factor치 증가에 따라 감소하였으며, 파단면 또한 C-factor의 증가에 따라 더 불규칙해지는 양상을 나타내었다. 본 실험의 결과 hybrid형 복합레진이 micro-hybrid형 복합레진에 비해 C-factor의 영향을 더 많이 받는 것으로 나타났으며, 와동의 C-factor증가가 굴곡강도나 탄성계수와 같은 복합레진의 물리적 성질을 저하시킨다는 것을 의미하였다.

Keywords

References

  1. Feilzer A, J., de Gee A. J., Davidson C. L. : Quantitative determination of stress reduction by flow in composite restorations. Dent. Mater., 6 : 167-171, 1990 https://doi.org/10.1016/0109-5641(90)90023-8
  2. Uno S., Shimokobe H. : Contraction stress and marginal adaptation of composite restorations in dentinal cavity. Dent. Maier; 13 : 19-24, 1994 https://doi.org/10.4012/dmj.13.19
  3. Davidson C. L., Van Zeghbroeck L., Feilzer A. J. : Destructive stresses in adhesive luting cements. J. Dent. Res; 70 : 880-882, 1991 https://doi.org/10.1177/00220345910700050301
  4. Davidson C. L., de Gee A. J., Feilzer A. J. : The competition between the composite-dentin bond strength and the polymerization contraction stress. J. Dent. Res., 63 : 1396-1399, 1984 https://doi.org/10.1177/00220345840630121101
  5. Feilzer A. J., de Gee A. J., Davidson C. L. : Curing contraction of composites and glass- ionomer cements. J. Prosthet. Dent., 59 : 297-300, 1988 https://doi.org/10.1016/0022-3913(88)90176-X
  6. Bowen R. L. : Adhesive bonding of various materials toward tooth tissues VI. forces developing in direct filling materials during hardening. J. Am. Dent. Assoc., 74 : 439-445, 1967 https://doi.org/10.14219/jada.archive.1967.0078
  7. Davidson C. L., de Gee A. J. : Relaxation of polymerization contraction stresses by flow in dental composites. J. Dent. Res., 63: 146-148, 1984 https://doi.org/10.1177/00220345840630021001
  8. Feilzer A. J., de Gee A. J., Davidson C. L. : Setting stresses in composite resin in relation to configuration of the restoratives. J. Dent. Res., 66 : 1636-1639, 1987 https://doi.org/10.1177/00220345870660110601
  9. Hegdahl T., Gjerdet N. R. : Contraction stresses of composite resin filling materials. Acta Odonioi. Stand., 35 : 191-195, 1977
  10. Bowen R. L., Nemoto K., Rapson J. E. : Adhesive bonding of various materials to hard tooth tissues : forces developing in composite materials during hardening. J. Am. Dent. Assoc., 106: 475-477,1983 https://doi.org/10.14219/jada.archive.1983.0078
  11. Kemp-Scholte C. M., Davidson C. L. : Marginal sealing of curing contraction gaps in class V composite resin restorations. J. Dent. Res., 67 : 841-845, 1988 https://doi.org/10.1177/00220345880670050901
  12. Alster D., Feilzer A. J., de Gee A. J., Davidson C. L. : Polymerization contraction stress in thin resin composite layers as a function of layer thickness. Dent. Mater., 13: 146-150, 1988
  13. Feilzer A. J., de Gee A. J., Davidson C. L. : Setting stresses in composites for two different curing modes. Dent. Mater., 9 : 2-5, 1993 https://doi.org/10.1016/0109-5641(93)90095-8
  14. Feilzer A. J., Dooron L. H., de Gee A. J., Davidson C. L. : Influence of light intensity on polymerization shrinkage and integrity of restoration - cavity interface. Eur. J. Oral sci., 103 : 322-326, 1995 https://doi.org/10.1111/j.1600-0722.1995.tb00033.x
  15. Lutz F., Krejci I., Barbakow F. : Quality and durability of marginal adaptation in bonded composite restorations. Dent. Mater., 7 : 107-113, 1991 https://doi.org/10.1016/0109-5641(91)90055-4
  16. Mehl A., Hickle R., Kunzelmann K. H. : Physical properties and gap formation of light cured composites with and without 'soft start polymerization. J. Dent., 25 : 321-330, 1997 https://doi.org/10.1016/S0300-5712(96)00044-9
  17. Feilzer A. J., de Gee A. J., Davidson C. L. Relaxation of polymerization contraction shear stress by hygroscopic expansion. J. Dent. Res., 69 : 36-39, 1990 https://doi.org/10.1177/00220345900690010501
  18. Braem M., Davidson C. L., Vanherle G., Van Doren V., Lambrechts P. : The relationship between testy methodology and elastic behavior of composites. J. Dent. Mater; 66 : 1036-1039, 1987 https://doi.org/10.1177/00220345870660050901
  19. Choi K. K., Condon J. R., Ferracane J. L. : The effects of Adhesive Thickness on Polymerization contraction Stress of Composite. J. Dent. Res., 79(3) : 812-817, 2000 https://doi.org/10.1177/00220345000790030501
  20. Munksgaard E. C., Hansen E. K., Kato H. : Wall-to-wall polymerization contraction of composite resins versus filler content. Scand. J. Dent. Res., 95 : 526-531, 1987
  21. Iga M., Takeshige F., Ui T., Torii M., Tsuchitani Y. : The relationship between polymerization shrinkage measured by a modified dilatometer and the inorganic filler content of Iight-cured composites. Dent. Mater., 10 : 38-45, 1991 https://doi.org/10.4012/dmj.10.38
  22. Kim K. H., Park J. H., Imai Y., Kishi T. : Microfracture Mechanisms of Dental Resin Composites Containing Spherically-shaped Filler Particles. J. Dent. Res., 73(2) : 499-504, 1994 https://doi.org/10.1177/00220345940730020301
  23. Labella R., Lambrechts P., Van Meerbeek B., Vanherle G. : Polymerization shrinkage and elasticity of flowable composites and filled adhesives. Dent. Maier; 15 : 128-137, 1999
  24. Yoshikawa T., Sano H., Burrow M. F., Tagami J., Pashley D. H. : Effects of Dentin Depth and Cavity Configuration on Bond Strength. J. Dent. Res., 78(4) : 898-905, 1999 https://doi.org/10.1177/00220345990780041001
  25. Murray R. Bouschlicher, Marcos A. Vargas, Daniel B. Boyer: Effect of composite type, light intensity, configuration factor and laser polymerization on polymerization contraction forces. Am.J. Dent., 10 : 88-96, 1997
  26. Shigeru UNO, Toru TANAKA, Satoshi INOUE, Hidehiko SANO : The Influence of Configuration Factors on Cavity Adaptation in Compomer Restorations. Dent. Mater.J., 18(1) : 19-31, 1999 https://doi.org/10.4012/dmj.18.19
  27. Kinomoto Y., Torii M. : Photoelastic analysis of polymerization contraction stresses in resin composite restorations. J. Dent., 26(2) : 165-171, 1998 https://doi.org/10.1016/S0300-5712(96)00083-8
  28. Carvalho R. M., Pereira J. C., Yoshiyama M., Pashley D. H. : A Review of Polymerization Contraction: The Influence of Stress Development versus Stress Relief. Oper. Dent., 21 : 17-24,1996
  29. Kinomoto Y., Torii M., Takeshige F., Ebisu S. : Comparision of polymerization contraction stresses between self-and light-curing composites. J. Deni., 27(5) : 383-389, 1999 https://doi.org/10.1016/S0300-5712(98)00065-7
  30. Kemp-Scholte C. M., Davidson C. L. : Complete marginal seal of class V resin composite restoration effected by increased flexibility. J. Dent. Res., 69 : 1240-1243, 1990 https://doi.org/10.1177/00220345900690060301
  31. Van Meerbeek B., Willems G., Celis J. P., Roos J., Braem M., Lambrechts P., Vanherle G. : Assessment by nano-indentation of the hardness and elasticity of the resin-dentin bonding area. J. Dent. Res; 72 : 1434-1442, 1993 https://doi.org/10.1177/00220345930720101401
  32. Eick ,J. D., Robinson S. J., Byerley T. J., Chappelow C. C. : Adhesives and nonshrinking dental resins of the future. Qumr. Int., 24 : 632-640, 1993
  33. Stansbury J. W. Synthesis and evaluation of new oxaspiro monomers for double ring- opening polymerization. J. Dent. Res., 71 : 1408-1412, 1992 https://doi.org/10.1177/00220345920710070901

Cited by

  1. Effects of cavity configuration on bond strength and microleakage of composite restoration vol.27, pp.5, 2002, https://doi.org/10.5395/JKACD.2002.27.5.479