DOI QR코드

DOI QR Code

이상점성 처리된 Mg-3, 6wt%Ni합긍의 수소화 특성평가

Evaluation of Hydrogenation Properties of Thixotropic Mg-3, 6wt%Ni Hydrogen Absorbing Alloys

  • 이성곤 (성균관대학교 대학원 신소재공학과) ;
  • 하원 (성균관대학교 대학원 신소재공학과) ;
  • 홍태환 (국립충주대학교) ;
  • 김영직 (성균관대학교 대학원 신소재공학과)
  • Lee, Sung-Gon (Dept. of Advanced Materials Engineering, Sungkyunkwan University) ;
  • Ha, Won (Dept. of Advanced Materials Engineering, Sungkyunkwan University) ;
  • Hong, Tae-Whan (Dept. of Mat. Sci & Eng./Nano Technology Lab. Chungju Nat'l Univ.) ;
  • Kim, Young-Jig (Dept. of Advanced Materials Engineering, Sungkyunkwan University)
  • 발행 : 2002.12.01

초록

Magnesium-3, 6wt% Nickel alloys were fabricated by Rotation-Cylinder Method(RCM) in ambient atmosphere. The alloys were divided into two different heat-treating conditions, as-cast and thixotropic treated. Thixotropic heat treatment enhances the separation of primary hydride former of Mg and the catalytic phase of $Mg_2$Ni. Hydrogenation properties of the each alloy were evaluated and compared by PCI(Pressure-Composition Isotherm) measurement. The maximum hydrogen capacity and the reversible capacity of as -cast Mg-6wt% Ni alloy were 5.2wt% and 3.8wt% at 623k, respectively.

키워드

참고문헌

  1. Myoung Youp Song, Jean-Pierre Manaud, Bernard Darriet, J. Alloys Comp., 282, 243 (1999) https://doi.org/10.1016/S0925-8388(98)00821-4
  2. Myoung Youp Song, J. Mater. Sci., 30, 1343 (1995) https://doi.org/10.1007/BF00356142
  3. M. Terzieva, M. Khrussanova, P. Peshev, J. Alloys Comp., 267, 235 (1998) https://doi.org/10.1016/S0925-8388(97)00556-2
  4. Karl J. Gross, Daniel Chartouni, Eric Leroy, Andreas Zuttel, Louis Schlapbach, J. Alloys Comp., 269, 259 (1998) https://doi.org/10.1016/S0925-8388(97)00627-0
  5. T. Akiyama, H. Isogai, J. Yagi, J. Alloys Comp., 252 L1 (1997) https://doi.org/10.1016/S0925-8388(96)02674-6
  6. G. Friedlmeier, M. Arakawa, T. Hirai, E. Akiba, J. Alloys Comp., 292, 107 (1999) https://doi.org/10.1016/S0925-8388(99)00285-6
  7. J.J. Reilly and R.H. Wiswall, Jr, Jr. Inorg. Chem., 7, 2254 (1968) https://doi.org/10.1021/ic50069a016
  8. Shin-ichi Orimo, Hironobu Fujji, Int. J. Hydrogen Energy., 24, 933 (1999) https://doi.org/10.1016/S0360-3199(98)00170-0
  9. R.L. Holtz, M.A. Imam, J. Mat. Sci., 32, 2267 (1997) https://doi.org/10.1023/A:1018572116447
  10. S.J. Ji, J.C. Sun, Z.W. Yu, Z.K. Hei, L. Yan, Int. J. Hydrogen Energy., 24, 59 (1999) https://doi.org/10.1016/S0360-3199(98)00039-1
  11. W. Ha, T.W. Hong, M.G. Kim, S.K. Kim and Y.J. Kim, J. Kor. Inst. Met. & Mater., 39(1), 126 (2001)
  12. T.W. Hong and Y.J. Kim, Proc. of The second KIM-JIM Joint Symposium on Hydrogen Absorbing Materials, 27 October 2000
  13. Jun Yang, M. Ciureanu, R. Roberge, J. Alloys Comp., 287, 251 (1999) https://doi.org/10.1016/S0925-8388(99)00049-3