Korean Journal of Materials Research (한국재료학회지)

Materials Research Society of Korea (한국재료학회)
권호 표지
DOI QR코드

DOI QR Code

Mechanical Properties and Fatigue Characteristics of CrN Coated Ti-6Al-4V alloy

CrN 박막처리된 Ti-6Al-4V 합금의 기계적 성질과 피로특성

  • Published : 2002.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

CrN film coated by AIP method, improved the mechanical properties (Hardness, Roughness, wear and fatigue) of Ti-6Al-4V alloy. The properties were studied using GXRD, XPS, Hardness, Roughness, wear and fatigue testers. CrN thin film thickness was about 7.5$\mu\textrm{m}$ and grew with (111) orientation. Hardness of CrN thin film was very high (Hv 1390) and roughness of the surface layer was greatly improved (Ra=0.063$\mu\textrm{m}$) compared with matrix alloy (Ra=0.321$\mu\textrm{m}$). Such changes of hardness and roughness could be contributed to improving the wear resistance and fatigue life. Striation like pattern with dimples and voids, a typical fatigue fracture mode, was observed throughout the specimen.

Keywords

References

  1. 中山武典, 和田恭典, 井戶秀和, 神戶製鋼技報, 43, 71 (1993)
  2. B. Berghaus, U.S. Patent 3181029, (1965)
  3. Edward Rolinski, Mater. Sci. & Eng., A108, 37 (1989) https://doi.org/10.1016/0921-5093(89)90404-8
  4. T.M. Muraleedharan, E.I. Meletis, Thin Solid Films, 221, 104 (1992) https://doi.org/10.1016/0040-6090(92)90802-I
  5. A. Raveh, R. Avni, Thin Solid Films, 186, 241 (1990) https://doi.org/10.1016/0040-6090(90)90146-5
  6. 岡本善四郞, 星加洋, 藥師寺正雄, 熱處理, 40, 25 (2001)
  7. 岡本善四郞, 星加洋, 藥師寺正雄, 熱處理, 40, 88 (2001)
  8. E.W. Turns, J.W. Browning and R.L. Jones, Plating and Surface Finishing, 62, 443 (1975)
  9. Frank H.W. Lffler, Surface and Coatings Technology, 68-69, 729 (1994) https://doi.org/10.1016/0257-8972(94)90246-1
  10. David A. Glocker, Handbook of Thin Film Process Technology (1995)
  11. E. ErtArk, H.J. Heuvel and H.G. Dederichs, Surface and Coatings Technology, 39-40, 435 (1989) https://doi.org/10.1016/S0257-8972(89)80005-2
  12. D. Wang and P. Panjan, Thin Solid Films, 185, 219 (1990) https://doi.org/10.1016/0040-6090(90)90086-S
  13. Y. Chiba, T. Omura and H. Ichimura, J. Mater. Res., 8, 1109 (1993) https://doi.org/10.1557/JMR.1993.1109
  14. W.F. Smith, Principles of Materials Science and Engineering, McGraw-Hill 101 (1986)
  15. J.F. Moulder, W.F. Stickle, P.E. Sobol, K.D.Bomben, 'Handbook of X-ray Photoelectron Spectroscopy', Published by Physical Electronics, Inc., (1995)
  16. O. Wanstrand, R. Fella, N. Axen, Surface and Coatings Technology, 94-95, 469 (1997) https://doi.org/10.1016/S0257-8972(97)00343-5
  17. B. Navinsek, P. Panjan, J. Krusic, Surface and Coatings Technology, 98, 809 (1998) https://doi.org/10.1016/S0257-8972(97)00316-2
  18. 橫堀武夫, 市川昌弘, 金屬の疲勞破壞, 丸善, 20 (1970)
  19. 山中久彦, イオン室化法,, 日刊工業新聞社, 99 (1976)
  20. O.H. Basquin, 'Am. Soc. Test. Mater. Proc..', 10, 25 (1910)

Cited by

  1. Enhanced wear and fatigue properties of Ti–6Al–4V alloy modified by plasma carburizing/CrN coating vol.18, pp.5, 2007, https://doi.org/10.1007/s10856-006-0014-0