참고문헌
- 허 훈, 2000, '디프 드로잉 - 소형 2차전지 사각케이스의 성형,' 월간 LG 생산기술, 제 3권, 제 2 호, pp.16-18
- Chung, S. Y. and Swift, H. W., 1952, 'An Experimental Investigation of Redrawing of Cylindrical Cups,' Proc. Instn. Mech. Engrs., Vol. 1B, pp.437-447
- Parsa, M. H., Yamaguchi, K., Takakura, S. and Imatani, S., 1994, 'Consideration of the Re-drawing of Sheet Metals based on Finite Element Simulation,' J. Mater. Process. Technol., Vol. 47, pp. 87-101 https://doi.org/10.1016/0924-0136(94)90087-6
- Saito, M., Saiki, H. and Kawai, N., 1989, 'Experimental Analysis of Ironing of Thin Metal Cups,' Trans. ASME, J. Engineering for Industry, Vol. 111, pp. 56-63 https://doi.org/10.1115/1.3188732
- Kawai, N., Dohda, K., Saito, M., Hayashi, N. and Wang, Z., 1992, 'Friction Behavior in the Cup Ironing Process of Aluminum Sheets,' Trans. ASME, J. Engineering for Industry, Vol. 11, pp. 175 -180
- Avitzur, B., 1983, Handbook of Metal Forming Process, John Wiely & Sons
- Tirosh, J., Iddan, D. and Silviano, M., 1992, 'Hydrostatic Ironing - Analysis and Experiments,' Trans. ASME, J. Engineering for Industry, Vol. 114, pp. 237-243
- Chang, D. and Wang, J. E., 1997, 'Influence of Process Parameters on the Ironing of Deep-drawn Cups,' Trans. ASME, J. Manuf. Sci. Engrg, Vol. 119, pp. 699 -705 https://doi.org/10.1115/1.2836812
- Odell, E. I., 1978, 'A Study of Wall Ironing by the Finite Element Technique,' Trans. ASME, J. Engineeringfor Industry, Vol. 100, pp. 31-36 https://doi.org/10.1115/1.3439342
- Baillet, L., Brunet, M. and Berthier, Y., 1996, 'Experimental and Numerical Dynamic Modeling of Ironing Process,' J. Mater. Process. Technol., Vol. 60, pp. 677 - 684 https://doi.org/10.1016/0924-0136(96)02404-1
- 김세호, 김승호, 허훈, 2000, '외연적 유한요소 법을 이용한 세장비가 큰 타원형컵 성형공정의 다단계 해석,' 한국소성가공학회지, 제9권, 제3호, pp 313-319
- 김승호, 김세호, 허훈, 2000, '세장비가 큰 타원형 컵 성형공정의 다단계 유한요소 역해석,' 한국소성가공학회지, 제9권, 제3호, pp. 304-312
- Hallquist, J. O.,1997, LS-DYNA3D User's Manual, Livermore Software Technology Corporation
- 전기찬, 1993, 박판금속의 성형 - 이론과 실제 - 반도출판사
- 박판금속의 성형 - 이론과 실제 - 전기찬