정량적 위험성 평가에 의한 안전관리 투자의 비용-편익분석

Cost-Benefit Analysis for Safety Management Cost using Quantitative Risk Analysis

  • 장서일 (명지대학교 공과대학 화학공학과) ;
  • 조지훈 (한국산업안전공단 산업안전교육원) ;
  • 김태옥 (명지대학교 공과대학 화학공학과)
  • 발행 : 2002.12.01

초록

The quantitative evaluation method of the safety management cost was suggested to prevent a gas accident as a major industrial accident. In a gas governor station, process risk assessments such as the fault tree analysis(FTA) and the consequence analysis were performed. Based on process risk assessments, potential accident costs were estimated and the cost-benefit analysis(CBA) was performed. From the cost-benefit analysis for five classification items of safety management cost, the order of the cost/benefit ratio was estimated.

키워드

참고문헌

  1. P. G. Sassone and W. A. Schaffer, 'A Handbook; Cost-Benefit Analysis', Academic Pres, New York, 1978
  2. AIChE(American Institute of Chemical Engineers), 'Guidelines for Consequence Analysis of Chemical Releases', New York, 1999
  3. S. I. Jang, H. C. Lee, J. H. Cho, S. K. Oh, and T. O. Kim, 'Cost and Benefit Analysis for Safety Management Cost by FMEA/HAZOP at Governor Station', J. of Safety Management & Science, Vol. 13, pp. 1-9, 2001
  4. AIChE, 'Guidelines for Hazard Evaluation Procedures', New York, 1985
  5. D. A. Crowl and J F. Louvar, Chemical Process Safety Fundamentals and Applications', Prentice-Hall Inc., New Jersey, 1990
  6. Crane, 'Flow of Fluids Through Valves, Fittings and Pipe', Technical Paper No. 410, New York, Crane Co., 1986
  7. API(American Petroleum Institute), 'A Guidance Manual for Modeling Hypothetical Accidental Release to the Atmosphere', Washington D.C., 1996
  8. W. B. Hooper, 'The Two-K Method Predicts Head Losses in Pipe Fittings', Chemical Engineering, August 24, pp. 96-100, 1981
  9. O. Levenspiel, 'Engineering Flow and Heat Exchange', Plenum Press, New York, 1984
  10. S. R. Hanna, G. A. Briggs, and R. P. Jr. Hosker, 'Handbook on Atmospheric Diffusion', Oak Ridge, TN. : Oak Ridge National Laboratory, U.S. Department of Energy, DOE/TIC 11223, 1982
  11. D. B. Turner, 'Workbook of Atmospheric Dispersion Estimates', Cincinnati, OH : U.S. Department of Health, Education and Welfare, 1970
  12. F. P. Lees, 'Loss Prevention in the Process Industries', 2nd Ed., Butterworths, London, 1996
  13. N. A. Eisenberg, C. J. Lynch, and R. J. Breeding, 'Vulnerability Model : A Simulation System for Assessing Damage Resulting from Marine Spills', U.S. Coast Guard, CG-D-136-75 and NTIS AD-015-245, 1975
  14. V. J. Clancey, 'Diagnostic Features of Explosion Damage', 6th International Meeting on Forensic Sciences, Edinburgh, Scotland, 1972
  15. IEEE(Institute of Electrical & Electronic Engineers) std-500, 1984
  16. Center for Chemical Process Safety(CCPS)/AIChE, 'Guidelines for Process Equipment Reliability Data', New York(1989)