Bell형 스위칭 함수를 이용한 가변구조제어계의 도달기간 제거방법

Method for Removing Reaching Phase in Variable Structure Control Systems Using Bell Type Switching Function

  • 김윤업 (국립창원대학교 공과대학 전기공학과) ;
  • 윤종일 (국립창원대학교 공과대학 전기공학과) ;
  • 곽군평 (국립창원대학교 공과대학 전기공학과)
  • 발행 : 2002.12.01

초록

이 논문은 Bell형 스위칭 함수를 이용하여 가변구조제어계의 도달 기간을 제거하기 위한 새로운 방법을 제공한다. 제안된 방법에 의해 전체 과정동안 도달 기간이 제거된다. trapezoidal형 브러쉬리스 DC 모터의 효과적인 속도 제어를 위해 시변 스위칭 함수를 사용하여 속도 제어기를 구성하였다.

This paper presents a new method for removing reaching phase in variable structure control systems using Bell type switching function. By proposed method, during the entire control process reaching phase is removed. For effective speed control of trapezoidal type brushless DC motor, a time varying switching function based speed controller is developed as illustration.

키워드

참고문헌

  1. 'Sliding Mode Control in Electromechanical System', VADIM UTKIN, JURGEN GULDNER, JINGXIN SHI, Taylor & Francis Ltd., 1999
  2. Comstock,R.H., 'Trends in burshless PM Drive and Motor Technology', Proc. of Motor-Con, pp. 1-15, (1986)
  3. 'DC Motors, Speed Controls, Servo Systems', Electro-craft Crop
  4. Okyay Kaynak, Kemalettin, Erbatur, Melikash Ertugrul, ‘The Fusion of computationally Intelligent Methodologies and Sliding Mode Control-A Survey’, IEEE Trans on Industrial Electronics, Vol.48, No.1, pp.4-17, (2001) https://doi.org/10.1109/41.904539
  5. S.H. Ryu, J.H. Park, 'Auto-Tuning of Sliding Mode Control Parameters Using Fuzzy Logic', Proc. of the American Control Conference, pp. 618-623, (2001)
  6. E.Z. Taha, G.S. Happawana, Y.Hurmuz-lu, 'Quantitative Feedback Theory (QFT) for chattering REduction and Improved Tracking in Sliding Mode Control', Proc. of the American Control conference, pp. 5004-5009, (2001)
  7. Yeo, H.G., 'Design of Fully Digitalized Position Controller for Trapezoidal Type Brushless DC Motor Using Digital Signal Processor',, Korea Univ., (1990)