Ganoderma lucidum균 전처리를 이용한 볏짚의 상압.소다펄프화

  • 주용찬 (전북대학교 농과대학 산림과학부) ;
  • 강진하 (전북대학교 농과대학 산림과학부)
  • 발행 : 2002.12.01

초록

This study was carried out to develop the biochemical pulping method to enhance energy saving and decrease the capital cost through the soda pulping under atmospheric pressure (100%). Nonwood substrates, rice straw, were pretreated by white-rot fungi, Ganoderma Iucidum. It has acquired several basic data that can be applied in bio-soda pulping. The results of this study were as follow. Without any nutrients or with glucose, N and glucose+N the weight losses of rice straws inoculated by Canoderma Iucidum were 8.5~29.8%, 9.3~32% 11.8~30.1% and 11.8~24.4% respectively for 5, 10, 15, 20, 25 and 30 days incubation. The more extending incubation periods, the more increasing weight losses. The yield of untreated rice saw was 54.8% after pulping. When any nutrients was not added or glucose, N and glucose+N were added for the pretreatment, the total yields were ranged 50.6~38.5%, 48.6~34.4%, 47.2~38.4% and 49.5~42.6% respectively for 5, 10, 15, 20, 25 and 30 days incubation. The yields were gradually decreased based on extending of incubation. The physical properties of rice straw soda pulps without fungal treatment, the density, breaking length, burst index, tear index and folding endurance were 0.24 g/$\textrm{cm}^3$, 2.32 km, 0.91 kPa $m^2$/g, 56.7 mN.$m^2$/g and 35 times, respectively. After pretreatment without any nutrients or with glucose, N and glucose+N as nutrients the density was 0.27~0.30 g/$\textrm{cm}^3$, the breaking length 3.14~5.25 km, burst index 1.42~2.78 kPa.$\textrm{m}^2$/g, tear index45.8~64.5 mN.$\textrm{m}^2$/g and folding endurance 47~288 times at all incubating periods when pulping was done. The physical properties were increased with the increasing incubation periods. However, when glucose+N was added, the physical properties were shown superior results each incubating duration.

키워드

참고문헌

  1. 펄프 · 종이기술 v.32 no.2 고수율 및 저카파가의 볏짚화학펄프 제조방법 개발 강진하;박성종
  2. 펄프 · 종이기술 v.14 no.1 微生物을 理用한 펄프製造 韓舜敎
  3. 3rd INWFPPC PROCEEDINGS v.1 Polysulfide-anthraquinone additive pulping of rice straw Ban;Wei-ping;Song, J.-G.;Zhang, L.-P.
  4. Tappi J. v.77 no.7 Alkali-Oxygen pulping of rice-straw Chen, K.-L.;Tosaka, K.;Hayashi, J.
  5. Holzforschung v.49 Refiner mechanical and biomechanical pulping of jute Harmohinder, S. S.;Akhtar, M.;Blanchette, R. A.;Young, R. A.
  6. Tappi J. v.64 no.7 Explosion pulping of bagasse and wheat straw Mamers H.;Yuritta, J. P.;Menz, D. J.
  7. Tappi J. v.77 no.1 Environmental compatibility of effluents of aspen biomechanical pulps Marguerite S.
  8. Tappi J. v.69 no.9 Recent worldwide trends of R&D on pulping and paper-making of nonwood plant fibers Kobayashi, Y.
  9. Tappi J. v.44 no.11 Fiber dimensions of nonwoody plants materials Perdue, Jr. R. E.;Niechlag, H. J.