제지공정의 WET-END 분석을 위한 새로운 감압 탈수 초지설비(RDA)의 활용(제1보) - RDA를 활용한 종이 균일성 예측 -

Application of the Novel Test Machine, Retention Drainage Analyzer(RDA), for Wet-End Analysis of Papermaking Process (I)

  • 우이균 (한국화학연구원 펄프제지연구센터) ;
  • 류정용 (한국화학연구원 펄프제지연구센터) ;
  • 김용환 (한국화학연구원 펄프제지연구센터) ;
  • 송봉근 (한국화학연구원 펄프제지연구센터) ;
  • 조남석 (충북대학교 농과대학 산림과학부)
  • 발행 : 2002.12.01

초록

In order to simulate the actual wet-end process in papermachine, RDA, a novel handsheet former, was used and following results were obtained. While the addition of polyelectrolytes gives significant effect on fiber flocculation, increase of stock consistency influenced on the formation of RDA sheets greatly. In particular, the consistency increase from 0.3 % to 0.4% abruptly increased floe size of RDA sheet and it results in severe deterioration of paper strength. Stock consistency, therefore, should be regarded as the most important factor in the formation simulation with RDA and should be controlled as the first sequence of tuning the operating conditions of RDA to simulate correctly the target machine paper's formation.

키워드

참고문헌

  1. Tappi. J. v.79 no.7 Vaughan, C. W.
  2. Tappi. J. v.79 no.6 Aidun, C. K.
  3. Tappi. J. v.78 no.2 Kerekes, R. J.;Schell, C. J.
  4. Tappi. J. v.79 no.5 Hua, X.;Tanguy, P. A.;Li, R.;Van wagner, K. S.
  5. Tappi. J. v.79 no.1 Bernie, J. P.;Murray Douglas, W. J.
  6. Tappi. J. v.82 no.7 Bouydain, M.;Colom, J. F.;Pladellorens, J.
  7. 펄프종이공학회 추계학술논문집 류정용
  8. TAPPI Test Method 205 sp-95
  9. TAPPI Test Method 402 sp-98
  10. TAPPI Test Method 403 om-97