Mechanical Design of Deepwater Pipeline Wall Thickness Using the Recent Rules

  • Choi, Han-Suk (Dept. of Naval Architecture & Ocean Engineering, Pusan National University)
  • Published : 2002.12.01

Abstract

This paper presents a mechanical design of the deepwater pipeline wall thickness using the recent design rules. Characteristics and limitations of the new codes were identified through a case study design in the Gulf of Mexico. In addition to the ASME, API, and DVD codes, the code of federal regulations (CFR) was also utilized in the design. It was found that conservatism still exists within the collapse prediction for water depth greater than 1500 m. Comparision of the results from DNV and API codes were presented.

Keywords

References

  1. American Petroleum Institute Recommended Practice 1111 Design, Construction, Operation, and Maintenance of Offshore Hydrocarbon Pipelines (Limit State Design) API
  2. American Petroleum Institute Specification 5L Specification for Line Pipe API
  3. American Society of Mechanical Engineer B31.4 Liquid Petroleum Transportantion Piping System ASME
  4. Pipelines and Risers Bai, Y
  5. Code of Federal Regulations, Title 30 Oil and Gas and Sulphur Operations in the Outer Continental Shelf CFR
  6. Code of Federal Regulations, Title 49 Transportation of Hazardous Liquids by Pipelines CFR
  7. Int. J. of Ocean Engineering and Technology v.1 no.1 Large Diameter Pipeline Installation in Ultra-Deepwater by J-lay Method Choi, H.S
  8. Int. J. of Ocean Engineering and Technology v.2 no.1 Conceptional Design of Next Generation J-lay system Choi, H.S;McDonald, D.N
  9. Det Norske Veritas Offshore Standard OS-F101 Submarine Pipeline System DNV
  10. Det Norske Veritas Offshore Standard OS-F201 Dynamic Risers DNV
  11. Det Norske Veritas Recommended Practice C203 Fatigue Strength Analysis of Offshore Steel Structures DNV
  12. Deepwater Technology Conference API and DNV Pipeline Design Rules Recently Updated Kopp, F;Peek R