DOI QR코드

DOI QR Code

Characteristics of High-Aspect-Ratio Ultrasonic Machining of Glass

초음파에 의한 고 세장비 유리가공 특성

  • 신용주 (강원대학교 기계메카트로닉스 공학부 대학원) ;
  • 김헌영 (강원대학교 기계메카트로닉스 공학부) ;
  • 장인배 (강원대학교 기계메카트로닉스 공학부) ;
  • 김병희 (강원대학교 기계메카트로닉스 공학부) ;
  • 전병희 (인덕대학교 컴퓨터응용 기계계열)
  • Published : 2002.11.01

Abstract

An ultrasonic machining process is efficient and economical means for precision machining of glass and ceramic materials. However, the mechanism of the process with respect to the crack initiation and propagation and the stress development in the ceramic workpiece subsurface arc still not well understood. In this research, we have investigated the basic mechanism of ultrasonic machining of ultrasonic machining of glass by the experimental approach. For this purpose, we designed and fabricated the desktop micro ultrasonic machine. The feed is controlled precisely by using the constant load control system. During machining experiments, the effects of abrasive characteristics and machining conditions on the surface roughness and the material removal rate are measured and compared.

Keywords

References

  1. Sensors and Actuators v.57 Micro ultrasonic maching and its applicatins in MEMS X. Q. Sun;T. Masuzawa;M. Fujino https://doi.org/10.1016/S0924-4247(97)80107-0
  2. 한국 정밀공학회지 v.17 no.7 미세 형상가공을 위한 방전·초음파 가공기술 주종남;김규만;김성윤
  3. Manufacturing Science and Technology, Trans. Of ASME v.2 Ultrasonic machining H. Ming;S. Wang;Lous Plebani;G. Sathyanarayanan
  4. Journal of Materials Processing Technology v.71 Mechanism of the ultrasonic machining of ceramic composites T.C. Lee;C. W. Chan https://doi.org/10.1016/S0924-0136(97)00068-X
  5. Journal of Materials Processing Technology v.88 Maerial-removal-rate analysis in the ultrasonic machine of engineering ceramics Q. H. Zhang;J. H. Zhang;Z. X. Jia;J. L. Sun https://doi.org/10.1016/S0924-0136(98)00400-2
  6. International Journal of Machine Tools and Manufacture v.38 Modeling of ductile-mode material removal in rotary ultrasonic machining Z. J. Pei;P. M. Ferreira https://doi.org/10.1016/S0890-6955(98)00007-8
  7. International Journal of Machine Tools and Manufacture v.38 no.4 Review on ultrasonic machining T. B. Thoe;D. K. Aspinwall;M. L. H. Wise https://doi.org/10.1016/S0890-6955(97)00036-9
  8. International Journal of Machine Tools and Manufacture v.41 no.8 Precision ultrasonic machine process: a case study of stress analysis of ceramic (Al203) B. Ghahramani;Z. Y. Wang https://doi.org/10.1016/S0890-6955(01)00011-6