참고문헌
- Welbourn, D.B., 1979, 'Fundamental Knowledge of Gear Noise-A Survey,' I.Mech.E., C117/79, PP. 1-14
- Munro, R.G., 1990, 'A Review of the Theory and Measurement of Gear Transmission Error,' IMechE, C404/032, pp. 3-10
- Barnett, D.W., Yildirim, N., 1994, 'Loaded Transmission Error Prediction Using a Computer Model and Its Verification,' Proc. of the 1994 International Gearing Conference, University of Newcastle, UK, pp. 57-61
- Houser, D.R., 1990, 'Gear Noise Sources and Their Prediction Using Mathematical Models,' Gear Design, SAE, pp. 213-221
- Houser, D.R., LDP User's Manual LDP8.3, Ohio State University, Columbus, OH
- Umeuama, M., Kato, M. and Inoue, K., 1998, 'Effects of Gear Dimensions and Tooth Surface Modifications an the Loaded Transmission Error of a Helical Gear Pair,' Trans. of the ASME. Journal of Mechanical Design, Vol. 20, pp. 119-125
- Park, C.I., 1992, 'A Study on the Load Transmission and Vibration Characteristics of Gear Systems,' Ph.D. Thesis, Seoul National University, Seoul, Korea
- Umezawa, K., 1972, 'The Meshing Test on Helical Gears under Load Transmission(1st Report, The Approximate Formula for Defelctions of Gear Tooth),' Bulletin of the JSME, Vol. 15, No. 90, pp. 1632-1639 https://doi.org/10.1299/jsme1958.15.1632
- Gosselin, C., Gingras, D., Brousseau, J. and Gakwaya, A., 1994, 'A Review of the Current Contact Stress and Deformation Formulations Compared to Finite Element Analysis,' Proc. of the 1994 International Gearing Conference, University of Newcastle, UK, pp. 155-160
- Cornell, R.W., 1981, 'Compliance and Stress Sensitivity of Spur Gear Teeth,' Trans. of the ASME Journal of Mechanical Design, Vol. 103, pp. 447-459 https://doi.org/10.1115/1.3254939
- Weber, C., 1949, 'The Deformations of Loaded Gears and the Effects on Their Load-carrying Cpacity,' Sponsored Research(Germany). British Dept. of Scientific and Industrial Research, Report No. 3
- Palmer. D. and Munro, R.G., 1995, 'Measurements of Transmission Error, Vibration and Noise in Spur Gears,' British Gear Association Congress, Suite 45, IMEX Park, Shobnall Rd. Burton on Trent
- Park, C.I. and Kim, D.S., 2001, 'Transmission Error Analysis of the Helical Gear for the Elevator,' Proc. of the KSME 2001 Spring Annual Meeting C, pp. 470-475
- Park, C.I. and Cho, D.H., 2002, 'Transmission Error Analysis of Helical Gears in Consideration of Shaft and Bearing Deformation,' Trans. of the KSME. A, Vol. 26, No. 10, pp. 2188-2194 https://doi.org/10.3795/KSME-A.2002.26.10.2194
- Smith, J.D., 1999, Gear Noise and Vibration, Marcel Dekker, Inc., NY
- Houser, D.R. and Singh, R., 1999, Basic Gear Noise Short Course, Ohio State University
- Townsend, D.P. 2nd ed., 1992, Dudley's Gear Handbook, McGraw-Hill, NY
- Dudley's Gear Handbook(2nd ed.) Townsend, D.P.
피인용 문헌
- Multi-objective optimization of the tooth surface in helical gears using design of experiment and the response surface method vol.24, pp.3, 2010, https://doi.org/10.1007/s12206-010-0117-x