멤브레인 (Membrane Journal)

  • 제12권4호
  • /
  • Pages.247-254
  • /
  • 2002
  • /
  • 1226-0088(pISSN)
  • /
  • 2288-7253(eISSN)
한국막학회 (The Membrane Society of Korea)
권호 표지

설폰화 폴리설폰을 이용한 직접메탄올연료전지용 이온교환막의 제조 및 특성 연구

Preparation and Characterization of ion Exchange Membrane for Direct Methanol Fuel Cell(DMFC) Using Sulfonated Polysulfone

  • 신현수 (한남대학교 공과대학 화학공학과) ;
  • 이충섭 (한남대학교 공과대학 화학공학과) ;
  • 전지현 (한남대학교 공과대학 화학공학과) ;
  • 정선영 (한남대학교 공과대학 화학공학과) ;
  • 임지원 (한남대학교 공과대학 화학공학과) ;
  • 남상용 (국립경상대학교 공과대학 고분자공학과)
  • 발행 : 2002.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

직접메탄올연료전지에 사용가능한 이온교환막을 개발하기 위하여 본 연구에서는 폴리설폰을 설폰화시켜 양이온교환막을 제조하였고 그에 대한 특성을 $150^{\circ}C$에서 열처리 전과 후를 통해 메탄을 투과도, 이온전도도, 이온교환용량 그리고 함수율 등에 대하여 평가하였다. 폴리설폰 고분자의 단량체와 설폰화제의 몰비가 1.4일 때 메탄올 투과도는 $2.87{\times}10^{-7} \;cm^2/s$(열처리 안함), $1.52{\times}10^{-7}\; cm^2/s$(열처리함)과 이온전도도는 1.10{\times}10^{-2}\; S/cm$ (열처리안함), 0.87{\times}10^{-2}\; S/cm$(열처리함)을 각각 보여 주었다. 그 이후의 몰비에서는 거의 증가하지 않았으며, 이러한 경향은 함수율과 이온교환용량에서도 같은 경향을 보여주었다.

In order to develop the ion exchange membranes which would be used in direct methanol fuel cell (DMFC), the polysulfone polymer was sulfonated using chlorosulfonic acid (CSA) and trimethylchlorosilane(TMCS). It has been characterized in terms of ion conductivities, methanol crossover, swelling degree and ion exchange capacities for the heat untreated and treated membranes at $150^{\circ}C.$ Typically, the methanol permeability and ion conductivity at the mole ratio of 1.4 between polysulfone repeating unit and sulfonating agents showed $2.87{\times}10^{-7}\; cm^2/s$(without heat treatment), $1.52{\times}10^{-7}\; cm^2/s$(with heat treatment) and $1.10{\times}10^{-2}\; S/cm$(without heat treatment), $0.87{\times}10^{-2}\;$ S/cm(with heat treatment), respectively. After the mole ration of 1.4 both values indicated mild increase.

키워드

참고문헌

  1. Scientific American v.281 no.1 Replacing the battery in portable electronics C. K. Dyer https://doi.org/10.1038/scientificamerican0799-88
  2. Platinum Met. Rev. v.40 no.4 Direct Methanol Fuel Cell M. P. Hogarth;G. A. Hard
  3. Membrane J. v.10 no.3 Development of membrane materials for direct methanol fuel cell Y. M. Lee;H. B. Park
  4. Membrane J. v.12 no.1 Recent development trends of cation exchange membrane materials C. S. Lee;H. S. Shin;J. H. Jun;S. Y. Jung;J. W. Rhim
  5. Membrane J. v.6 no.1 Preparation of sulfonated Polysulfone membranes S. J. Kim;J. Y. Jeon;S. H. Koo;T. M. Tak
  6. J. Membr. Sci. v.156 Ion exchange membrane based on block copolymers. Part Ⅲ: preparation of cation exchange membrane Gab-Jin Hwang;Haruhiko Ohya;Toshiyuki Nagai https://doi.org/10.1016/S0376-7388(98)00331-7
  7. J. Membr. Sci. v.139 Development and characterization of crosslinked ionomer membranes based upon sulfinated and sulfonated PSU/Crosslinked PSU blend membranes by alkylation of sulfinate groups with dihalogenoalkanes Jochen Kerres;Wei Cui;Martin Junginger https://doi.org/10.1016/S0376-7388(97)00254-8
  8. J. Membr. Sci. v.139 Development and characterization of crosslinked ionomer membranes based upon sulfinated and sulfonated PSU Crosslinked PSU blend membranes by disproportionation of sulfinic acid groups Jochen Kerres;Wei Cui;Ralf Disson;Wolfgang Nebrand https://doi.org/10.1016/S0376-7388(97)00253-6
  9. J. Membr. Sci. v.153 Comparative investigations of ion-exchange membranes S. Koter;P. Piotrowski;J. Kerres https://doi.org/10.1016/S0376-7388(98)00242-7
  10. J. Membr. Sci. v.185 Ionomeric membranes for proton exchange membrane fuel cell (PEMFC):sulfonated polysulfone associated with phosphatoantimonic acid P. Genova-Dinitrova;B. Baradie;D. Foscallo;C. Poinsignon;J. Y. Sanchez https://doi.org/10.1016/S0376-7388(00)00634-7
  11. Membrane J. v.9 no.3 Dehydration behavior of Water-butanal solutions through asymmetric sulfonated polysulfone membrane I. S. Byun;G. C. Park;S. H. Cha;C. O. Kwon;J. W. Seo;Y. W. Kim
  12. Sep. Purif. Technol. Suppression of plasticization in polysulfone membranes for gas separations by heat-treatment technique A. F. Ismail;W. Lorna
  13. J. Membr. Sci. v.83 Partially sulfonated poly(arylene ether sulfone) - A versatile proton conducting membrane material for modern energy conversion technologies R. Nolte;K. Ledijeff;M. Bauer;R. Mulhaupt https://doi.org/10.1016/0376-7388(93)85268-2
  14. M. S. Thesis Preparation and characterization of cation exchange membrane using sulfonated polysulfone C. I. Choi
  15. J. Electrochem. Soc. v.145 no.11 Proton and Methanol Transport in Poly(perfluorosulfonate) Membranes Containing Cs+ and H+ Cations Vincenzo Tricoli
  16. Diffusion E. L. Cussler
  17. 喜多見書房 (昭和 59年) 膜學實驗法 中垣正幸
  18. J. Membr. Sci. v.154 Pervaporation membranes in direct methanol fuel cell B. R. Pivovar;Y. Wang;E. L. Cussler https://doi.org/10.1016/S0376-7388(98)00264-6
  19. J. Membr. Sci. v.171 Performance of the direct methanol fuel cell with radiation-grafted polymer membranes K. Scott;W. M. Taama;P. Argyropoulos https://doi.org/10.1016/S0376-7388(99)00382-8
  20. Chem. Matls. v.8 Proton conductivity: materials and applications K. D. Kreuer
  21. J. Appl. Electrochem. v.29 Effect of crosslinking on the physicochemical properties of proton conducting PVDF-g-PSSA membranes T. Lehtinen;G. Sundholm