A study on the In-situ Stress Measurement of Anisotropic Rocks by Leeman Method - An Experimental and Numerical Simulation on Transversely Isotropic Rock

공벽변형법에 의한 이방성 암반의 초기응력 측정에 관한 연구 - 횡등방성 암석에 대한 실험실 모형 실험 및 수치해석

  • 민기복 (스웨덴 왕립공과대학) ;
  • 이정인 (서울대학교 공과대학 지구환경시스템공학부) ;
  • 최해문 (삼성물산 건설부문 기술연구소)
  • Published : 2002.12.01

Abstract

A total of 18 stress measurements were performed in the rock and rock-like blocks in the laboratory to estimate the influence of anisotropy in rock. Full scale overcoring equipment, which consists of a coring machine and a biaxial loading system by flat jacks, was developed to simulate the in-situ rock stress condition in the laboratory By comparing the isotropic analysis with the anisotropic analysis in measuring the stress, conclusions have been drawn as to the influence of anisotropy. The maximum difference between the isotropic and the anisotropic analysis was 34% and it was shown that the stress measurement considering the anisotropy was needed. To confirm the validity of the observed data, a diagnostic analysis of stress relief curve by overcoring was conducted using the three dimensional finite difference program, FLAC 3D.

암반의 이방성이 초기응력 측정결과에 미치는 영향을 살펴보기 위하여 현지암반의 응력 상태를 실험실에서 이축상태로 재현하여 초기응력 측정을 실시하였다. 이축가압장치는 플랫잭(flat jack)을 이용하여 제작하였으며, 등방성과 이방성 암석, 모르타르 및 인공이방성 암석 등 4 종류의 시료에 대하여 총 18회의 초기응력 측정을 실시하였다. 초기응력 측정 결과 이방성을 고려한 경우가 고려하지 않은 경우에 비해 최고 34%의 차이가 발생함으로써 이방성을 고려한 초기응력 측정이 필요함을 확인하였다. 또한 3차원 유한차분해석 프로그램인 FLAC 3D를 이용하여 오버코어링에 따른 응력개방곡선의 적합성에 대한 분석을 실시하여 실험실 모형실험의 결과가 수치해석에 의한 결과와 유사함을 확인하였다.

Keywords

References

  1. 한국암반공학회지 v.5 이방성 암석에 대한 탄성계수의 실험적 결정 김호영
  2. 한국암반공학회지 v.11 no.1 이방성 암석의 탄성상수 분석연구 박철환
  3. 가을'92 우리나라 지하암반의 초기응력 상태와 심부지하공간 개발설계에의 응용 이정인
  4. 대한광산학회지 v.17 공경변화법에 의한 암반내 초기응력 측정에 관한 연구 임한욱;이정인
  5. PhD thesis, University of California The influence of rock anisotropy on measurement of streesses in-situ Amadei, B.
  6. Int. J. Rock Mech. Min. Sci. & Geomech. Abstr. v.33 no.3 Importance of Anisotropy When Estimating and Measuring In Situ Stress in Rock Amadei, B.
  7. Rock stress and its measurement Amadei, B.;Stephansson, O.
  8. Int. J. Rock Mech. Min. Sci. & Geomech. Abstr. v.15 Diagnostic Stress-relief Curves in Stress Measurement by Overcoring Blackwood, R. L.
  9. PhD. thesis, University of New South Wales Comparative tests and studies of overcoring stress measurement devices in different rock conditions Cai, M.
  10. Int. J. Rock Mech. Min. Sci. & Geomech. Abstr. v.28 no.2;3 A technique for the recovery and re-use of CSIRO Hollow Inclusion Cells Cai, M.
  11. Int. J. Rock Mech. Min. Sci. & Geomech. Abstr. v.8 no.6 Stress strain relations applicable to overcoring techniques in transversely isotropic rocks Heerden, W. L. V.
  12. FLAC3D manual(Version 2.0) Itasca Consulting Group
  13. Int. J. Rock Mech. Min. Sci. & Geomech. Abstr. v.24 no.1 International society for rock mechanics commission on testing methods: Suggested methods for rock stress determination Kim, K.;Franklin, J. A.
  14. Int. J. Rock Mech. Min. Sci. & Geomech. Abstr. v.5 The determination of the complete sate of stress in rock in a single borehole-laboratory and underground measurements Leeman, E. R.
  15. Int. J. Rock Mech. Min. Sci. & Geomech. Abstr. v.5 Elastic Moduli of a stratified rock mass Salamon, M. D. G.
  16. Int. J. Rock Mech. Min. Sci. & Geomech. Abstr. v.37 Preparation and mechanical properties of artificial transversely isotropic rock Tien Y. M.;Tsao, P. F.
  17. Anisotropic elasticity - Theory and applications Ting, T. C. T.
  18. Int. J. Rock Medh. Min. Sci. & Geomech. Abstr. v.24 no.1 Finite Element Analysis of Two Overcoring Techniques for i nsity stress measurement Wan, Y.;Wong, T.-F.
  19. Comprehensive Rock Engineering v.3 CSIRO triaxial stress measurement cell Worotnicki, G.;Hudson J. A.(ed.)