PTT 섬유의 염색성 (1) - 열처리한 PTT 섬유의 염색성 및 물성 -

Dyeing of PTT Fiber(1) - Effect of Heat Setting on Dyeing and Physical Properties of PTT Fiber -

  • 발행 : 2002.10.01

초록

Poly(trimethylene terephthalate)(PTT) and Poly(ethylene terephthalate)(PET) fibers were annealed at various temperatures ranging from $100^\circ{C}$ to $230^\circ{C}$ for 10 min under tension and tension free. Dyeing rates and absorption isotherms of both fibers were obtained with C.I. Disperse Red 60 at 100, 120 and $130^\circ{C}$ in water system. Also X-ray diffraction pattern, moisture regain and water absorption were investigated. The dyeing rate of PTT fiber is faster than PET fiber, and dyeing of PTT fiber begin at lower temperature compared to PET fiber. The absorption isotherms from both fibers with disperse dye we nearly linear up to the saturation dye uptake, which increase with dyeing temperature. Equilibrium dye uptake of PTT fiber annealed under tension above $180^\circ{C}$ was remarkably decreased because of a changes in the fine structure of fiber. The intensities of X-ray diffraction peaks of both annealed fibers were increased with increasing in annealed temperature. The reflections observed at $2\theta$=$15.8^\circ$, $24^\circ$ and $25.2^\circ$ were assigned reflection of crystal at the planes of (010), $(1\bar02,\;\bar112),\;and\;(\bar13,\; \bar113)$ respectively, and the peak became sharp with heat setting temperature.

키워드

참고문헌

  1. 한국염색신문 no.290 첨단 염색가공 섬유소재의 핵심기술 연구 한국염색신문
  2. Br. Patent 578,079 Improvements Relating to the Manufacture of Highly Polymeric Substances
  3. U.S. Patent 2,465,319 Polymeric Linear Terephthalic Esters
  4. Angew. Makromol. Chem. v.230 Preparation and Properties of Fiber grade Poly(trimethylene terephthalate) W. Oppermann;H. L. Traub;P. Hirt;H. Herlinger https://doi.org/10.1002/apmc.1995.052300113
  5. International Man-Made Fibers Congress Poly(trimethylene terephthalate) - A New(Old) Fiber H. S. Brown;H. H. Chuah
  6. Chem. Fiber Int. v.47 Texturing of Textile Filament Yarns Based on Poly(trimethylene terephthalate) H. S. Brown;H. H. Chuah
  7. J. Polym. Sci., Polym. Phys. Ed. v.14 The Mechanical Properties and Structure of PolY(m-methylene terephthalate) I. M. Ward;M. A. Wilding;H. Brody https://doi.org/10.1002/pol.1976.180140206
  8. Chem Fibers Int. v.45 Mechanical Properties of Fibers Made of Polytrimethylene Terephthalate H. L. Traub;P. Hirt;H. Herlinger
  9. J. Soc. Dyers Colour. v.111 Dyeing Properties of Cotton fibers Treated with Liquid Ammonia T. Wakida;M. Lee;S. Niu;Y. Yanai;H. Yoshioka;S. Kobayashi;S. Bae;K. Kim https://doi.org/10.1111/j.1478-4408.1995.tb01714.x
  10. J. Korean Fiber Soc. v.26 New Interpretation of Change in the Chain Conformation of PET Annealed under Various Conditions K. J. Kim;J. S. Kim;W. H. Jo
  11. J. Soc. Dyer. Colourist. v.70 The Heat Setting of Terylene Polyester Filament Fabrics in Relation to Dyeing and Finishing D. N. Marvin
  12. J. Appl. Polym. Sci. v.26 The Effect of Heat Setting on the Structure and Mechanical Properties of Poly(ethylene terephthalate) Fiber. I. Sturctural Changes V. B. Gupta;S. Kumar https://doi.org/10.1002/app.1981.070260611
  13. J. Appl. Polym. Sci. v.70 Microstructure of Amorphous and Crystalline Poly(ethylene terephthalate) W. Chen;E. A. Lofgren;S. A. Jabarin https://doi.org/10.1002/(SICI)1097-4628(19981205)70:10<1965::AID-APP12>3.0.CO;2-6