Magnetic properties of Sr-ferrite by La-Co substitution

La-Co 치환량에 따른 스트론튬 페라이트의 자기특성

  • 장세동 (카본로렌코리아(주) 개발팀)
  • Published : 2002.10.01

Abstract

This experiment was carried out to examine the effects of La-Co substitution on Sr-ferrite. The magnetic properties of calcined and sintered materials varied with the substitutional amount of La and Co elements in Sr-ferrite. Anisotropy field and coercivity for Sr ferrite were increased with raising La-Co substitution amounts. The microstructure observation for Sr ferrite substituted by La-Co revealed that La-Co inhabited grain growth during calcination and promoted lateral grain growth during sintering. The relationship between $B_{r}$ and $_{i}$ /$H_{c}$ for La-Co substituted Sr-ferrite was found to be $B_{r}$$≒0.097_{i}$ /$H_{c}$/+4500. In case of $SrFe_{12}$ $O_{19}$, $B_{r} was 4090 G and $_{ i}$$H_{c}$ was 3560 Oe, but $B_{r}$ was 4080 G and and $_{i}$ $H_{c}$ was 4800 Oe for $Sr_{0.7}$ $La_{0.3}$ $Fe_{11.7}$ /$Co_{0.3}$ $O_{19}$.

스트론튬 페라이트에 포화자화를 높이기 위하여 Fe이온에 Co를 치환하고, 원소치환에 따른 전하보상차원으로 La를 동시 치환을 실시한 $_{l-x}$ La$Sr_{x}$ /$Fe_{12-x}$ $Co_{x}$ $O_{19}$ 조성에서 치환량 X=0에서 부터 X=0.5까지 0.1씩 변화하여 하소분말을 제조하여 하소분말 특성을 조사하고, 소결조제와 함께 미분쇄한 후 자장중 성형 및 소결하여 스트론튬 페라이트 자석을 제조하여 미세구조와 자기적 특성을 조사하였다. 스트론튬 페라이트에 La-Co 치환량이 증가할수록 하소 후 이방성자장과 하소분말의 보자력을 강하게 증가시키며, 하소후 결정크기가 작아지는 것으로 나타났다. 스트론튬 페라이트 자석은 La-Co의 치환량에 따라 회귀식 $B_{r}$ $≒0.097_{i}$ $H_{c}$ +4500의 함수적 관계를 나타내고 있으며, La-Co를 치환하지 않은 $SrFe_{12}$$O_{19}$ 조성에서 잔류자속밀도는 4090 G, 보자력은 3560 Oe를 나타내었으나, La-Co치환량 0.3인 $Sr_{0.7}$ $La_{0.3}$ $Fe_{11.7}$ $Co_{0.3}$ $O_{19}$ 조성에서 잔류자속밀도는 4080 G, 보자력은 4800 Oe 특성을 나타내었다.

Keywords

References

  1. J. J. Went, G. W. Rathenenau, E. W. Gorter and G. W.vanOosterhout: Philips Tech. Rev., 13, 194 (1952)
  2. A. Cochardt: J. Appl. Phys., 34, 1273 (1963) https://doi.org/10.1063/1.1729468
  3. H. Taguchi, F. Hirata, T. Takeishi, and T. Mori, 'HighPerformance ferrite magnet', Proc. ICF6, Tokyo, Japan, P.1118 (1992)
  4. Y. Ogata, H. Iwasaki, Y. Kubota, M. Yamamoto, T. limuia, T.Shinohara 'Hot isostatic pressing of Sr ferhte magnet', Proc.ICF7, Bordeaux, Fnmce, PP. C1-309-310 (1996)
  5. H. Yamamoto, 'Research on ferrite magnet materials', J.Jpn, Soc. Powder & Powder Metallurgy, vol. 43, no.l,pp.5-12 (1996) https://doi.org/10.2497/jjspm.43.5
  6. H. Taguchi, T. Takeishi, K. Suwa, K. Masuawa, Y.Minachi, 'High energy ferrite magnets', Proc. ICF7,Bordeaux, France, pp.C1-311-312 (1996)
  7. Y. Kubota, T. Takami and Y. Ogata 'La-Co substituted Srferrite magnets', Proc. Ferrite, ICF8, Kyoto and Tokyo,Japan, p. 410 (2000)
  8. R. A. McCume and S. Jackson, J. Appl. Phys., 61, P.4858. (1987) https://doi.org/10.1063/1.338350
  9. R. Grossinger, J. C. Tellezblanco, F. K-ools, A. Morel, M.Rossignol, and Ph. Tenaud, Ferrites, Proc. of ICF8, Tokyoand Kyoto, Japan p. 428-430 (2000)
  10. A. Morel, F. Kools, P. Tenaud, R. Grossinger and M.Rossignol 'Modeling of La-Co substituted M-type ferrite coercivity force', Proc. Ferrite, ICF8, Kyoto andTokyo, Japan, p. 434 (2000)