참고문헌
- Qian, J. and Faterni, A., 1996, 'Mixed Mode Fatigue Crack Growth: A Literature Survey,' Eng Frac. Mech., Vol. 55, No.6, pp. 969 - 990 https://doi.org/10.1016/S0013-7944(96)00071-9
- Richard, H. A., 1983, 'A Loading Device for the Criterion of Mixed Mode in Fracture Mechanics,' Int. J. Fracture, Vol. 22, pp. R55 - R58 https://doi.org/10.1007/BF00942726
- Hallback, N. and Nilson, F., 1994, 'Mixed Mode I/II Fracture Behavior of an Aluminum Alloy,' J. Mech. Solids, Vol. 42, No.9, pp. 1345-1374 https://doi.org/10.1016/0022-5096(94)90001-9
-
Hong, K. J. and Kang, K. J., 1996, 'Method to Measure
$K_I,\;K_{II}$ and J-Integral for CTS Specimen under Mixed Mode Loading,' Transaction of the KSME A, Vol. 20, No. 11, pp. 3498 - 3506 - Erdogan, F. and Sih, G. C., 1963, 'On the Crack Extension in Plates Under Plane loading and Transverse Shear,' J. of Basic Engineering, Vol. 85, pp. 519-525 https://doi.org/10.1115/1.3656897
- Sih, G. C., 1974, 'Strain Energy Density Factor Applied to Mixed Mode Crack Problems,' Int. J. Fracture, Vol. 10, pp. 305 - 321 https://doi.org/10.1007/BF00035493
- Keisuke Tanaka, 1974, 'Fatigue Crack Propagation from a Crack Inclined to the Cyclic Tensile Axis,' Eng. Frac. Mech., Vol. 6, pp. 493 - 507 https://doi.org/10.1016/0013-7944(74)90007-1
- Richard, H. A., 1986, 'Some Theoretical and Experimental Aspects of Mixed Mode Fracture,' Advances Fracture Research, Vol. 5, pp. 3337-3344
- Qian, J. and Fatemi, A., 1996, 'Fatigue Crack Growth under Mixed Mode I and II Fatigue Loading,' Fatigue Fract. Engng. Mater. Struct., Vol. 19, No. 10, pp. 1277-1284 https://doi.org/10.1111/j.1460-2695.1996.tb00950.x
- Ong Jang-Woo, Jin Keun-Chan, Lee Sung-Geun and Kim Jong-Bae, 1989, 'Mixed-Mode Fatigue Crack Growth Behaviors in 5083-H115 Aluminum Alloy,' Transaction of the KSME A, Vol. 13, No. 3, pp. 461-471
- Song Sam-Hong and Lee Jeong-Moo, 2001, 'Fatigue Crack Propagation Behavior in STS304 under Mixed Mode Loading,' Transaction of the KSPE, Vol. 18, No.9, pp. 131-139
- Lal, D. N., 1996, 'A Detailed Physical Analysis of the R-Effect on LEFM Fatigue Crack Growth,' Eng. Frac. Mech., Vol. 55, No.1, pp. 115-132 https://doi.org/10.1016/0013-7944(95)00219-7
- Raghuvir Kumar and Kamlesh Singh, 1995, 'Influence of Stress Ratio on Fatigue Crack Growth in Mild Steel,' Eng. Frac. Mech., Vol. 50, No.3, pp. 377-384 https://doi.org/10.1016/0013-7944(95)91547-3
- ASTM E647, 'Standard Test Method for Measurement of Fatigue Crack Growth Rates,' Annual Book of ASTM Standards, Vol. 03.01, pp. 565 - 601
- ABAQUS User's Manual, 1998, Version 5.8, Habbitt, Karlsson and Sorensen, Inc., Pawtucket, RI
- Murakami, Y., 1987, Single edge cracked plate tension specimen(SECT), Stress Intensity Factors Hand Book, Pergamon Books, pp. 9-10