References
- Lee, M. K. Kim, T. S. and Park, K. W., 2000, 'Development of a CNC Machining Tool with Stewart Platform,' Proc. of the ISIM, Kyongnam, Korea pp. 270-274
- Masory, O. Wang, J. and Zhuang, H., 1993, 'On the accuracy of a Stewart platform-Part II, kinematic calibration and compensation,' Proc. IEEE Int. Conf. Robot. Automat., Atlanta. GA, pp. 725-731
- Zhuang, H. Li, B. Roth, Z. S. and Xire, X., 1992, 'Self-calibration and Mirror Center Offset Elimination of a Multi-beam Laser Tracking System,' Robot. Autonomous Syst., Vol. 9, pp. 255-269 https://doi.org/10.1016/0921-8890(92)90042-W
- Masory, O. and Jiahua, Y., 1995, 'Measurement of Pose Repeatability of Stewart Platform,' J Robot. Syst. Vol. 12, No. 12, pp. 821-832 https://doi.org/10.1002/rob.4620121206
- Desnard, S. Khalil, W., 1999, 'Calibration of parallel robots using two inclinometers,' Proc. of the 1999 IEEE Int. Conf, on Robot. Automat. Detroit, Michigan. pp. 1758-1763, May https://doi.org/10.1109/ROBOT.1999.770363
- Zhuang, H. Wang, K. and Roth, S., 1995, 'Simultaneous calibration of a robot and a hand-mounted camera.' IEEE Trans. Robot. Automat., Vol. 11, No.5, pp. 649-660 https://doi.org/10.1109/70.466601
- Wampler, W. Hollerbach, J. M. and Arai, T., 1995, 'An implicit loop method for kinematic calibration and its application to closed-chain mechanisms,' IEEE Trans. Rahat. Automat. Vol. 11, pp. 710-724 https://doi.org/10.1109/70.466613
- Veitscherrer, W. K. and Wu, C. H., 1988, 'Robot Calibration and Compensation,' IEEE Trans. Robot. Automat., Vol. 4, No.6, pp. 643--655 https://doi.org/10.1109/56.9302
- Bennett, D. and Hollerbach, J. M, 1991, 'Autonomous calibration of single-loop closed kinematic chains formed by manipulators with passive endpoint constraints,' IEEE Trans. Robot. Automat., Vol. 7, pp. 597--606 https://doi.org/10.1109/70.97871
- Zhuang, H. Motaghedi, S. H. and Roth, Z. S., 1999, 'Robot calibration with planar constraints,' Proc. of the 1999 IEEE Int. Conf. on Robot. Automat. Detroit, Michigan, pp. 805-810, May https://doi.org/10.1109/ROBOT.1999.770073
- Besnard, S. and Khalil, W., 2001, 'Identifiable Parameters for Parallel Robots Kinematic Calibration,' Proc. IEEE Int. Conf. Robot. Automat., Seoul, Korea, pp. 2859-2866 https://doi.org/10.1109/ROBOT.2001.933055
- Menq, C. H. Bonn, J. H. and Lai, J. Z., 1989, 'Identification and observability measure of a basis set of error parameters in robot calibration,' ASME J Mech Trans. Automat. Design, Vol. 111, No.4, pp. 513-518