References
- ASTM standard, 1983, 'Standard Practice for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials,' ASTM E139, pp. 305-314
- Berns, H. and Krafft, F., 1990, '12%Cr Steels Alloyed with Nitrogen under Pressure and The Influence of A Thermo-mechanical Treatment on Their Mechnical Properties,' Proc. of the Conf. on Rupture Ductility of Creep Resistance Steels, Edited by Strang, A., held at York, pp. 116-124
- Cadek, J. 1988, Creep in Metallic Materials, Materials Science Monographs, Vol. 48, Elsevier, Amsterdam-Oxfrod-New York-Tokyo, pp. 335-338
- Dobes, F. and Milika, K., 1976, 'The Relation Between Minimum Creep Rate and Time to Fracture,' Metal Science, Vol. 10, pp. 382-384 https://doi.org/10.1080/03063453.1976.11683560
- Evans, R.W. and Wilshire, B., 1985, Creep of Metals and Alloys, The Institute of Metal, London, pp. 9-12
- Fujiwara, M., Uchida, H., Ohta, S., Yuhara, S., Tani, S. and Sato, Y., 1986, 'Development of Modified Type 316 Stainless Steel for Fast Breeder Reactor Fuel Cladding Tubes,' Ridiation-Induced Change in Microstructure 13th Int. Sym. - Part I, ASTM STP 955, pp. 127-145 https://doi.org/10.1520/STP33813S
- Kim, W.G., Kim, D.W. and Ryu, W.S., 2000, 'Applicability of Monkman-Grant Relationships to Type 316L(N) Stainless Steel,' Transactions of the KSME A, Vol. 24, No. 9, pp. 2326-2333
- Kim, W.G., Kim, D.W. and Ryu, W.S., 2001, 'Creep Design of Type 316LN Stainless Steel by K-R Damage Theory,' Vol. 25, No. 2, pp. 296-303
- Kim, W.G. and Ryu, W.S., 2000, 'Application of K-R Creep Damage Constitutive Equation to Type 316LN Stainless Steel,' Proc. of Materials and Fracture Part of the KSME-00MF078, Sungkyunkwan University, pp.232-238
- Kim, W.G., Kim, S.H. and Ryu, W.S., 2001, 'Creep Characterization of Type 316LN Stainless Steel and HT-9 Stainless Steels by the K-R Damage Model,' KSME International Journal, Vol. 15, No. 11, pp. 1463-1471
- Manfred, E. and Vitale, E., 1984, 'Creep Strength and Hot Tensile Behavior in AISI 316 Austenitic Steels,' Proc. of the 2nd International Conference on Creep and Fracture of Engineering Materials and Structures-Part II, Edited by B. Wilshire and D.R.J. Owen, Pineridge Press, Swansea, U.K., pp. 1239-1249
- Nabarro, F.R.N. and Villers, H.L., 1995, The Physics of Creep-Creep and Creep-Resistant Alloys, Taylor & Francis Ltd., pp. 22-26
- Nakazawa, T., Abo, H., Tanino, M., Komatsu, H., Nishida, T. and Tashimo, M., 1988, 'Effect of Nitrogen and Carbon on Creep Properties of Type 316 Stainless Steels,' Proc. of High Nitrogen Steels-HNS 88, held at Lile in France, pp. 218-223
- Oh, Y.J. and Hong, J.H., 2000, 'Nitrogen Effect on Precipitation and Sensitization in Cold-Worked Type 316L(N) Stainless Steel,' Journal of Nuclear Materials, Vol. 278, pp. 242-250 https://doi.org/10.1016/S0022-3115(99)00255-X
- Penny, R.K. and Marriott, D.L., 1995, Design for Creep, Chapman & Hall, London, pp. 139-199
- Riedel, H., 1987, Fracture at High Temperature, Material Research and Engineering, Edited by Ilschner, B. and Grant, N.J., Springer Verlag, pp. 389-390
- Ryu, W.S., Kim, W.G., Kim, D.W., Kuk, I.H., Jang, J., Rhee, C.K., Chung, M.G., Park, S.D. and Han, C.H., 1998, 'A State of the Art Report on LMR Structure Materials,' KAERI/AR-487/98, pp. 37-47
- Viswanathan, R., 1989, Damage Mechanisms and Life Assessment of High-Temperature Components, ASM International, pp. 10-18