References
- Kim, S. J. and Ro, S. T., 1997, 'The Performance Analysis of a Single and Dual Pressure HRSG,' Proceedings of the KSME 1997 Spring Annual meeting B, pp. 7-12
- Kim, Y. I., Kim, T. S., Kim, J. H., Ro, S. T. and Kauh, S. K, 1999, 'Analysis of Start-up Characteristics of a Heat Recovery Steam Generator Considering Thermal Constraints,' Trans. Of KSME B, Vol. 23, No. 11, pp. 1410-1417
- Park, H. J., Kim, T. S. and Ro, S. T., 2000, 'Analysis of Dynamic Behavior of a Heat Recovery Steam Generator and Steam Turbine System,' Trans. Of KSME B, Vol. 24, No. 7, pp. 994-1001
- Lee, B. R., Kim, T. S., Ro, S. T., Shin, H. T. and Jeon, Y. J., 2002, 'Thermal Design Analysis of Triple-Pressure Heat Recovery Steam Generator and Steam Turbine Systems,' Trans. Of KSME B, Vol. 26, No. 3, pp. 507-514
- Galopin, J. F., 1998, 'Going supercritical: once-through is the key,' Modern Power Systems, December, pp. 39-43
- Bolland O., 1991, 'A Comparative Evaluation of Advanced Combined Cycle Alternatives,' Journal of Engineering for Gas Turbines and Power, Vol. 113, pp. 190-197 https://doi.org/10.1115/1.2906544
- Collier, J. H. and Thome, J. R., 1994, Convective Boiling and Condensation, 3rd ed., Oxford University press
- Chen, J. C., 1966, 'Correlation for Boiling Heat Transfer to Saturated Fluids in Convective Flow,' Ind. Eng. Chem. Proc. Des. Dev., 5
- ESCOA Corp., Fin Tube Manual, 1979, U.S.A.
- Kim, T. S. and Ro, S. T., 1996, 'Program Development for Design and Part Load Performance Analysis of Single-Shaft Gas Turbine,' Trans. Of KSME B, Vol. 20, No. 7, pp. 2409-2420
- PROPATH Group, 1997, PROPATH : A Program Package for Thermophysical Properties, Version 10.2, Kyushu University, Japan
- Spencer, R. C., Cotton, K. C., and Canon, C. N., 1963, 'A Method for Predicting the Performance of Steam Turbine-Generators ... 16,500 kW and Larger,' Journal of Engineering for Power, Vol. 85, pp. 49-301