DOI QR코드

DOI QR Code

다중보강링을 갖는 압출금형의 치수최적설계

Optimal Design of Dimension of Extrusion Die with Multi Stress Rings

  • 안성찬 (현대중공업 산업기술연구소 구조연구실) ;
  • 임용택 (한국과학기술원 기계공학과)
  • 발행 : 2002.10.01

초록

In this study, an optimal design study has been made to determine dimensions of die and multi stress rings for extrusion process. For this purpose, a thermo-rigid-viscoplastic finite element program, CAMPform, was used fur forming analysis of extrusion process and a developed elastic finite element program fur elastic stress analysis of the die set including stress rings. And an optimization program, DOT, was employed for the optimization analysis. From this investigation, it was found out that the amount of shrink fitting incurred by the order of assembly of the die set should be taken into account for optimization when the multi stress rings are used in practice. In addition, it is construed that the proposed design method can be beneficial fur improving the tool life of cold extrusion die set.

키워드

참고문헌

  1. Lange, K, 1985, Handbook of Metal Forming, McGraw-Hill, Inc
  2. Hawkyard, J. B., Hirai, T., Ishise, T. and Katayama, T., 1984, 'Optimisation of Shrink Ring Interference Configuration for Metal Forming Die,' Advanced Technology of Plasticity, Vol. 11, pp. 912-917
  3. Forejt, M., Krejeova, J. and Kapitanova, R., 1997, 'The Optimization of Compound Forming Dies Geometry,' Proc. International Conference on Industrial Tools, pp. 95-102
  4. Thomsen, S. G., 1987, 'Optimization of Dies for Axisymmetric Cold Forward Extrusion,' Engineering Optimization, Vol. 11, pp. 13-20 https://doi.org/10.1080/03052158708941032
  5. Ham, H. W. and Kim, B. M., 1998, 'Optimal Die Shape Design of Cold Extrusion Considering Mechanical Fatigue and Wear Resistance,' Proc. KSME, Spring Annual Meeting A, pp. 777-782
  6. Choi, J. C., Kim, B. M., Jin, I. T. and Kim, H. S., 1988, 'A Study on the Process Planning and Die Design of Cold-Forging Using Personal Computer (I),' Trans. KSME A, Vol. 12, No.4, pp. 712-720
  7. Kim, H. S., 1998, 'A Study on Development of Expert System for Cold Forging Process Design Based on Searching Technique,' Ph.D. Dissertation, KAIST, Taejon, Korea
  8. Gronbaek, J. and Nielsen, E. B., 1997, 'Stripwound Containers for Combined Radial and Axial Prestressing,' J. Mater. Proc. Tech., Vol. 71, pp. 30-35 https://doi.org/10.1016/S0924-0136(97)00120-9