소성∙가공 (Transactions of Materials Processing)

  • 제11권5호
  • /
  • Pages.430-438
  • /
  • 2002
  • /
  • 1225-696X(pISSN)
  • /
  • 2287-6359(eISSN)
한국소성∙가공학회 (The Korean Society for Technology of Plasticity and materials processing)
권호 표지
DOI QR코드

DOI QR Code

자동차용 허브 클러치의 유동제어에 관한 실험적 연구

Experimental Investigation on the Flow Control of Hub Clutch for Automobile

  • 박종남 (부산대학교 대학원 정밀기계공학과) ;
  • 김동환 (부산대학교 정밀정형 및 금형가공연구소) ;
  • 김병민 (부산대학교 기계공학부)
  • 발행 : 2002.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper suggests the new technology to control metal flow in orther to change of the cold forging from conventional deep drawing forming. This technology can be summarized the complex forming, which consists of bulk forming and sheet forming, and multi-action forging, which be performed double action press. The proposed technology is applied to hub clutch model which is part of auto-transmission for automobile. The purpose of this study is to investigate the material flow behavior of hub clutch through control the relative velocity ratio and the stroke of mandrel and punch using the flow forming technique. First of all, the finite element simulations are applied to analyse optimal process conditions to prevent flow defect(necking defect etc.) from non-uniform metal flow, then the results are compared with the plasticine model material experiments. The punch load for real material is predict from similarity law. Finally, the model material experiment results are in good agreement with the FE simulation ones.

키워드

참고문헌

  1. T. Nakano, 1994, 'Modem applications of complex fanning and multi-action fanning in cold forging', J. Mat. Proc. Tech., No. 46, pp. 201-226.
  2. Sun Sheng, Luan Yi Guo, 1994, 'A die forging design approach for controlling metal flow way and its application in practice', Int. J. Mach. Tools Manufact. Vol. 34, No.2, pp. 161-167. https://doi.org/10.1016/0890-6955(94)90098-1
  3. Altan T., R. Allen miller, 1990, 'Design for Fanning and other Near Net Shape Manufacturing Processes', Annals of the CIRP Vol. 39, pp. 609-620. https://doi.org/10.1016/S0007-8506(07)62998-9
  4. 김동진, 김병민, 이동주, 2001, '유동제어를 통한 자동차 용 피스톤-핀의 공정설계,' 한국소성가공학회지, 제10권 제2호, pp. 151-159.
  5. T. Nakano, 2001, '板金成形 と 冷間鍛造の 複合技術', JSTP, Vol. 42, No. 484, pp. 22-26.
  6. N. Ishinaga, 1997, 'An advanced press design for cold forging', J. Mat. Proc. Tech., No. 71, pp. 100-104.
  7. Kala Osakada, Xin Wang and Shinji Hanami, 1996, 'Forward-Backward Extrusion with Axially Driven Container', JSTP, Vol. 37, No. 30, pp. 1154-1179.
  8. E. Sato, T. Shimizu, etc., 1995, 'Square cup deep drawing of thick plate by multi-axial loading, Part 1, 2', JMPT, Vol. 48, pp. 69-80. https://doi.org/10.1016/0924-0136(94)01634-D
  9. Y. Nagai etc., 1996, 'The Trial for Fanning of a Spur Gear Made from the Drawn Cup', JSTP, Vol. 37, No. 126, pp. 736-742.
  10. 'DEFORM user's manual V 4.1', 1995, Scientific technologies corporation.
  11. T. Wanheimand and J. Danckert, 1987, 'Combined physical and Numerical Modeling of Metal Fanning Process', Advanced Technology of Plasticity, Vol. 1, pp. 29-36.

피인용 문헌

  1. Shape design of the deep-drawing preform for manufacturing of automobile drum clutch hubs vol.226, pp.4, 2012, https://doi.org/10.1177/0954406211417495
  2. Development of Flow Forming Process for Hollow Shaped Parts from Seamless Steel Tube vol.20, pp.8, 2011, https://doi.org/10.5228/KSTP.2011.20.8.611
  3. Design of Hexagonal Fitting Nut Preform Considering a Ductile Fracture vol.13, pp.4, 2004, https://doi.org/10.5228/KSPP.2004.13.4.359