Journal of the Korean institute of surface engineering (한국표면공학회지)

The Korean Institute of Surface Engineering (한국표면공학회)
권호 표지

The influence of spraying conditions to the coating layer properties of Fe-Cr-Ni-Mo-Si-B alloy using the HVOF

HVOF를 이용한 Fe-Cr-Ni-Mo-Si-B계 고성능 합금 용사층의 특성에 미치는 용사조건의 영향

  • Published : 2002.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study was performed to investigate the influence of spraying condition to the coating layer properties of Fe-Cr-Ni-Mo-Si-B alloy using the HVOF. The investigations, such as thickness measurement, surface roughness, hardness, friction coefficient, resistance of corrosion were carried out. Matrix is prepared by gritting and coating layer is made of Fe-Cr-Ni-Mo-Si-B alloy powder using HVOF. Alumina gritting layers are superior to steel gritting layers. The less spaying distance, the more coating layer properties confirmed. The optimum spraying condition, in this study, was proved as 13inch spraying distance with feed rate 350rpm (78g/min).

Keywords

References

  1. 변응선, WC-Co 코팅층의 특성에 미치는 HVOF 용사조건의 영향, 용사기술 workshop, 1998
  2. HVOF 용사된 Cr3C2-20wt% (NiCr)층의 열처리에 따른 미세구조 및 특성 변화, 한국재료학회지, 7. (1997) 11
  3. Plasma Coatings of FeMoCrNiB Alloy with Amorphized Structure, Proceedings of the 1993 National Thermal Spray Conference, Anaheim, CA, 7-11 June 1993
  4. JP-5000 HP/HVOF SYSTEM OPERATING MANUAL
  5. ASTMC633-79
  6. Influence of thermal processes on coating for mation during high velocity oxyfuel (HVOF) spraying of WC-Ni powder particles, Surf. Coat. Technol.,82 (1996) 121 https://doi.org/10.1016/0257-8972(95)02657-6
  7. Investigation of the development of coating structure during high velocity oxyfuel (HVOF) spraying of WC-Ni powder particles, Surf. Coat. Technol.,82(1996) 114 https://doi.org/10.1016/0257-8972(95)02656-8
  8. Strength of HVOF coating-substrate interfaces, Thin Solid Films,V,332N.1-2, (1998) 185 https://doi.org/10.1016/S0040-6090(98)01267-X
  9. Substrate-coating thermal interaction during high velocity oxyfuel spraying, Mater. Sci. Technol.V.11, (1995) 1052 https://doi.org/10.1179/mst.1995.11.10.1052