References
-
Danforth, S. C. and Richman, M. H., 1983, 'Strength and Fracture Toughness of Reaction-Bonded
$Si_3N_4$ ,' Am. Ceramic Soc., Bullentin, Vol. 62, No, 4, pp. 501-504 - Nair, S. V., Gwo, T. J., Narbut, N. M. and Kohl, J. G., 1991, 'Mechanical Behavior of a Continuousf - SiC - Fiber-Reinforced RBSN-Matrix Composites,' J. Am. Ceramic Soc., Vol. 74, No. 10, pp. 2551-2558 https://doi.org/10.1111/j.1151-2916.1991.tb06798.x
-
Xu, H. H. K., Ostertag, C. P. and Braun, L. M., 1994, 'Short-Crack Mechanical Properties and Failure Mechanism of
$Si_3N_4$ -matrix/Sic-Fiber Composites,' J. Am. Ceram. Soc., Vol. 77, No. 7, pp. 1889-1896 https://doi.org/10.1111/j.1151-2916.1994.tb07067.x - Bhatt, R. T., 2000, 'Tensile Properties and Microstructral Characterization of Hi-Niclon Sic/RBSN Composites,' Ceramic International, Vol. 26, pp. 535-539 https://doi.org/10.1016/S0272-8842(99)00091-7
- Raghuraman, S., Lara-Curzio, E. and Ferber, M. K., 1996, 'Modelling of Flexural Behavior of Continuous Fiber Ceramic Composites,' Ceram. Eng. & Sci. Proc., Vol. 17, No. 4, pp. 147-156
- Van Landeghen, P. L. and Jenkins, M. G., 1999, 'Comparative Investigation of Intra and Inter Laboratory Mechanical Test of Flexural, Tensile and Shear Behavior CFCC,' Ceram. Eng. & Sci. Proc., Vol. 20, Issue3, pp. 605-613
- Pennings, E. C. M. and Grellner, W., 1989, 'Precise Nondestructive Determination of the Density of Porous Ceramics,' J. Am. Ceram. Soc., Vol. 72, No. 2, pp. 1268-1270 https://doi.org/10.1111/j.1151-2916.1989.tb09724.x
- Mark, K. Y., 1996, 'Numerical Modeling of the Mechanical Response of a Continuous Fiber Ceramic Composite in Flexure,' MS Thesis, University of Washington
- Aveston, J., Cooper, G. A. and Kelly, A., 1971, 'Single and Multiple Fracture in the Properties of Fiber Composites,' Proc. of the Nat. Physical Lab., IPC Sci. and Tech. Press
- Jenkins, M. G., Kobayashi, A. S., Sakai, M., White, K. W. and Bradt, R. C., 1987, 'A 3-D Finite Element Analysis of a Chevron Notched Three Point Bend Fracture Specimen,' Int, J. of Fracture, Vol. 34, pp. 281-295 https://doi.org/10.1007/BF00013083
-
Munz, D., Bubsey, R. T. and Shannon, J. L., Jr., 1980, 'Fracture Toughness Determination of
$Al_2O_3$ Using Four-Point Bend Specimens with Straight-Through and Chevron Notches,' J. Am. Ceram. Soc., Vol. 63, No. 5-6, pp. 300-305 https://doi.org/10.1111/j.1151-2916.1980.tb10725.x