한국공작기계학회논문집 (Transactions of the Korean Society of Machine Tool Engineers)

한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

고분자 수지를 이용한 자동차 에어컨용 압축기의 씰에 관한 연구

A Study on Compressor Seal for Automotive Air-conditioner using Polymer Resin

  • 정태형 (한양대학교 기계공학과) ;
  • 하영욱 (한양대학교 대학원 기계설계학과)
  • 발행 : 2002.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The existing compressor steel seal used in automotive air-conditioner has the problem of oil leakage and deterioration in shielding performance, due to the abrasion and corrosion of the material. A new type of polymer resin seal studied in this research has the characteristics of high anti-abrasiveness and anti-corrosiveness, which can oversome the defects of the steel seal. In addition, the seal needs lower manufacturing cost and is appropriate to mass production, because it is made by the injection molding method requiring no mechanical processing. The profile generation program for seal mold has been developed using the gradient method, and the molding characteristics of the seal have analyzed through the flow analysis and the warpage analysis. The program has been verified by comparing the analysis results with the measured data of the test product. The research might be said to provide the basic method to produce the polymer resin seals with various types and dimensions.

키워드

참고문헌

  1. NTN Tech. Rev. v.61 自動變速機用 NTN 고성능 수지 밀봉링 大阪
  2. European Polymer Journal(USA) v.36 no.8 Influence of time and temperature on deformed films of poly ether-ketone(PEEK) Russo, R. R.;D'Aniello, C. C.;Romano, G. G.;Vittoria, V. V. https://doi.org/10.1016/S0014-3057(99)00235-9
  3. 춘계학술대회논문집 AUTOCAD를 이용한 프라스틱 사출금형자동설계의 개발에 관한 연구 이태홍;이성수
  4. Polymer Engineering and Science USA. Society of Plastics Engineers v.30 no.14 Crystallization and structure-mechanical property relations in(poly ether ether ketone)[PEEK] Medellin-Rodriguez, F. J.
  5. Polymers and Polymer Composites v.6 no.5 High Fibre Volume Fraction Injection Moulding of Carbon Fibre Reinforced Poly ether ether ketone(PEEK)in Order to Raise Mechanical Properties Semadeni, M.;Zerlik, H.;Rossini, P.;Meyer, J.;Wintermantel, E.
  6. Conference Proceedings of Composites, Standards, Testing and Design The characterisation of reinforced thermoplastics for industry and engineering uses Dunn, C. M. R.;Turner, S.
  7. Computer Aided Plastics Application 한국시뮬레이션 기술
  8. Plastics, Rubber and Composites Processing and Applications v.21 Engineering design properties for injection moulding compounds based on poly ether ether ketone Moore, D. R.;Smith, J. M.