KIEE International Transactions on Electrophysics and Applications

대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

Surface Characterization of Silicone Rubber for Outdoor Insulation by Measurement of Surface Voltage Decay

  • Youn, Bok-Hee (School of Electrical Engineering, Inha University) ;
  • Huh, Chang-Su (School of Electrical Engineering, Inha University) ;
  • Cho, Han-Gu (Korea Electrotechnology Research Institute (KERI))
  • 발행 : 2002.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The influence of ultraviolet (UV) irradiation and corona on the surface degradation of high temperature vulcanized (HTV) silicone rubber used for outdoor insulation through measuring surface voltage decay after corona charging, surface resistivity, contact angle and X-ray photoelectron spectroscopy (XPS) analysis was studied. The surface resistivity calculated by the surface voltage decay was compared with a value directly obtained from the three electrode method having the guard ring electrode. A good agreement between the two methods for surface resistivity was obtained. UV treated specimens showed the slower decrease of surface voltage decay, while the corona exposed specimens showed a dramatically faster decrease. Although both artificial treatments cause the same oxidative products, which was confirmed with XPS, we could distinguish the difference between the reactions of the two treatments by monitoring the surface voltage decay on corona-charged specimen. In addition, we could derive the specific surface states of the silicone rubber treated by accelerated artificial aging factors and the degradation process.

키워드

참고문헌

  1. J.S.T. Looms, Insulators for HIGH VOLTAGE, Peter Peregrinus, 1988, pp. 75-107
  2. R.S. Gorur, E.A. Cherney and J.T. Burnham, Outdoor insulators, Ravi S. Gorur, Inc., 1999, pp. 33-247
  3. V.M. Moreno, R.S. Gorur, Ac and de Performance of Polymeric Housing Materials for HV Outdoor Insulators, IEEE Die. & E.I., vol. 6, no. 3, pp. 342-350, June 1999
  4. V.M. Moreno, M. Ponce, E. Valle and J Fierro, Effects of surface charge on the hydrophobicity levels of insulating materials, IEE Proceedings Gen., Trans. and Distr., vol. 145, no. 6, pp. 675-681, November 1998
  5. B.S. Lee, D.C. Lee, Surface Degradation Properties of Ultraviolet Treated Epoxy/Glass Fiber, IEEE Die. & E.I., vol. 6, no. 6, pp. 907-912, December 1999
  6. N. Yoshimura, S. Kumagai, Electrical and Environmental Aging of Silicone Rubber Used in Outdoor Insulation, IEEE Die. & E.I., vol. 6, no. 5, pp. 632-650, October 1999
  7. D. Simon, J. Liesegang, P.J. Pigram, N. Brack and J.L. Pura, XPS and surface resistivity measurements of plasma-treated LDPE and ageing effects, Surface Surface Interface Anal., vol. 32, pp. 148-153, 2001
  8. J. Liesegang, B.C. Senn and E.R. Smith, J. Appl. Physics, vol. 77, no. 11 , pp. 5782-5785, June 1995
  9. C.C. Ku, R. Liepins, ELECTRICAL PROPERTIES OF POLYMERS-CHEMICAL PRINCIPLES, Hanser Publishers, 1987, pp. 200-305
  10. A. Crisci, B. Gosse, J.P. Gosse and V.O. Dureault, Surface-potential decay due to surface conduction, European Physical Journal applied physics, vol 4, pp. 107-116, October 1998
  11. H. Hillborg, U.W. Gedde, Hydrophobicity Changes in Silicone Rubbers, IEEE Die. & E.I., vol. 6, no. 5, pp. 703-717, October 1999
  12. D.O.H. Teare, C. Ton-That and R.H. Bradley, Surface characterization and ageing of ultravioletozon e-treated polymers using atomic force microscopy and x-ray photoelectron spectroscopy, Surface Interface Anal., vol. 29, pp. 276-283, 2000
  13. A. Toth, I. Bertoti, M. Blazso, G. Banhegyi, A. Bognar, P. Szaplonczay, Oxidative Damage and Recovery of Silicone Rubber Surfaces. I. X-ray Photoelectron Spectroscopic Study, J. Appl. Polymer Sci., vol. 52, pp. 1293-1307, 1994