초록
콘크리트 구조물의 건전성 평가에 사용되는 충격반향기법에서는 콘크리트의 P파 속도가 부재의 두께 및 결함의 위치를 찾는데 있어서 매우 중요한 요소이다. 본 논문의 동반논문인 수치해석편에서 표면파기법을 이용하여 콘크리트 부재의 P파 속도를 신뢰성 있게 추정함을 알 수 있었다. 수치해석 연구에 이어서 본 논문에서는 공극, 불량콘크리트 등의 결함이 내재된 콘크리트 모형 슬래브를 제작하여 제안된 충격반향-표면파 병행기법의 실제 구조물에 대한 적용성 연구를 수행하였다. 실험결과, 표면파기법으로부터 구한 부재의 P파 속도는 두께를 알고 있는 부분에서 충격반향기법으로부터 구한 P파 속도와 거의 일치하였으며, 표면파기법으로부터 구한 P파 속도를 적용하여 충격반향기법을 수행한 결과, 여러 결함의 위치를 신뢰성있게 찾아낼 수 있었다. 또한, 실제 지중에 매설되는 관 형태의 지중 구조물과 지중에 매설된 개착식 터널에서 제안된 비파괴검사기법을 수행한 결과, 구조물의 두께를 신뢰성 있게 구하여 실제 지반구조물에서의 현장 적용성을 확인하였다.
P-wave velocity of concrete is a crucial parameter in determining the thickness of concrete lining, the location of cracks or other defects in Impact-Echo(IE) method. This study introduces an IE-SASW method that may determine the P-wave velocity on a surface of each testing area using the Spectral Analysis of Surface Wave (SASW) method. In numerical studies(Part I), it was verified that P-wave velocities could be obtained from SASW. In this paper(Part II), experimental studies were made in slab type concrete model specimens in which voids and waterproof sheet were included at the known locations. Accordingly, the feasibility of the proposed method was evaluated. The IE-SASW method was also performed in the precast model tunnel on ground and open-cut tunnel in ground. SASW tests were performed to determine the P-wave velocity of the concrete and then IE tests were carried at regularly spaced points along the testing lines to determine the thickness of structures. The nondestructive testing method which combined SASW and IE tests showed the great potential in the field applications.