대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제26권9호
  • /
  • Pages.1866-1873
  • /
  • 2002
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

공리적 접근을 통한 자동 가스절단기의 개발

Development of an Automatic Pipe-cutting Machine by Axiomatic Approach

  • 발행 : 2002.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The pipe-cutting machine developed in this study is a portable device used to cut a steel pipe. The machine, which is attached to the steel pipe by magnetic force, is moving around the pip e using four wheels. It also works for straight cutting of a steel plate. For the higher precision and labor time reduction, the automation of a pipe-cutting process is needed. However, it is not easily achieved because of vibrations and the loss of track. It is also found that the problems of the automation arise from the coupling of the functional requirements for the pipe-cutting machine. So, it is very difficult io solve the problems by a conventional design method. To overcome the difficulties the new design process for the pipe-cutting machine is established by axiomatic approach in this paper. Based on the Independence Axiom design process, a new product is designed and manufactured. Finally, it is verified by experiments that the performance of the automatic pipe-cutting machine is improved

키워드

참고문헌

  1. Harris, C. M., 1997, 'Shock and Vibration Handbook,' Mcgrawhill, Fourth Edition
  2. Ewins, D. J., 1986, 'Modal Testing: Theory and Practice,' B&K
  3. Hollkamp, J. J. and Gordon, R. W., 2001, 'Modal Test Experiences with a Jet Engine Fan Model,' Journal of Sound and Vibration, Vol. 248, No. 1, pp. 151-165 https://doi.org/10.1006/jsvi.2001.3758
  4. Tan, C. A. and Ying, S., 2000, 'Active Wave Control of the Axially Moving String: Theory and Experiment,' Journal of Sound and Vibration, Vol. 236. No. 5, pp. 861-880 https://doi.org/10.1006/jsvi.2000.3040
  5. Chung, J. and Ro, D. S., 1999, 'Dynamic Analysis of an Automatic Dynamic Balancer for Rotating Mechanisms,' Journal of Sound and Vibration, Vol. 228, No.5, pp. 1035-1056 https://doi.org/10.1006/jsvi.1999.2456
  6. Heo, J. W., Kwon, T. J., Chung, J., Han, C. S. and Ahn, K. H., 2001, 'A Study on the Effect of the Vibration and Particle Generation of a Spin Coater on Thin Film Coating,' Journal of KSNVE, Vol. 11, No.4, pp.31-36
  7. Song, S. H., Kim, H, R. and Chung, J., 2000, 'A Study on Vibration Reduction of an Industrial Fan,' Journal of KSNVE, Vol. 10, No.3, PP. 457-464
  8. Kwon, T. J., Chae, H. C., Han, C. S., Chung, J. and Ahn, K. H., 2000, 'Modeling and Sensitivity Analysis for the Performance Improvement of a Spin Coater,' Journal of KSMTE, Vol. 9, No. 6, pp. 96-102
  9. Hong, J. S., Park, S. H., Kim, H. S., Oh, J. E. and Chung, J., 2000, 'Active Vibration Control of Acoustically Loaded Flexible Plate Enclosure Using Multi Channel Control Algorithm,' Transaction of the KSME, A, Vol. 24, No.6, pp. 1390-1397
  10. Lee, D. J., Chung, J. and Hwang, C. H., 2000, 'Vibration Analysis of an Automatic Ball Balancer with Double Races,' Transaction of the KSME, A, Vol. 24, No. 5, pp. 1093-1102
  11. Lee, D. J., Chung, J. and Ro, D. S., 1999, 'Vibration Reduction of an Optical Disk Drive Using an Automatic Ball Balancer,' Journal of KSNVE, Vol. 9, No. 2,pp. 355-362
  12. Park, J. M., Ro, D. S. and Chung. J., 1999, 'Vibration Analysis of an Automatic Ball Balancer,' Journal of KSNVE, Vol. 9, No.2, pp. 363-370
  13. Chung, J., Park. J. M. and Ro, D. S., 1997, 'Optimal Position of the Dampers in a CD-ROM Drive to Remove the Tilting Vibration Mode,' Journal of KSNVE, Vol. 7, No.3, pp. 393-399
  14. Chung, J., 1995, 'A Study on Selection for the Rotating Speeds of Spindle Motors to Stabilize Computer Hard Disks,' Journal of KSNVE, Vol. 5, No. 2, pp. 163-168
  15. Chung, J., 1999, 'A Study on Mechanism Design of Optical Spinning Disk,' Final Report of SEC
  16. Suh, Nam P., 2001, 'Axiomatic Design,' The Oxford University Press
  17. Suh, Nam P., 1999, 'A Theory of Complexity, Periodicity and the Design Axioms,' Research in Engineering Design, Vol. 11, pp. 116-132 https://doi.org/10.1007/PL00003883
  18. Suh, Nam P., 1998, ' Axiomatic Design Theory for Systems,' Research in Engineering Design, Vol. 10, pp. 189-209 https://doi.org/10.1007/s001639870001
  19. Li, H.-X., Tso, S. K., and Deng, H., 2001, 'A Conceptual Approach to Integrate Design and Control for the Epoxy Dispensing Process,' International Journal of advanced Manufacturing Technology, Vol. 17, pp. 677-682 https://doi.org/10.1007/s001700170133
  20. Chen, L. and Raman, K., 2000, 'A Subjective Design Framework for Conceptual Design of Polymeric Processes with Multiple Parameters,' Research in Engineering Design, Vol. 12, pp. 220-234 https://doi.org/10.1007/s001630050035
  21. Engelhardt, F., 2000, 'Improving Systems by Combining Axiomatic Design, Quality Control Tools and Designed Experiments,' Research in Engineering Design, Vol. 12, pp. 204-219 https://doi.org/10.1007/s001630050034
  22. Deng, Y.-M., Tor, S. B. and Britton, G.. A., 2000, 'Abstracting and Exploring Functional Design Information for Conceptual Mechanical Product Design,' Engineering with Computers, Vol. 16, pp. 36-52 https://doi.org/10.1007/s003660050035
  23. Shooter, S.B., Keirouz, W. T., Szykman, S. and Fenves, S. J., 2000, 'A Model for the Flow of Design Information in Product Development,' Engineering With Computers, Vol. 16, pp. 178-194 https://doi.org/10.1007/s003660070004
  24. Do, S. H. and Park, G.. J., 2001, 'Application of Design Axioms for Glass Bulb Design and Software Development for Design Automation,' Journal of Mechanical Design, Vol. 123, pp. 1-8 https://doi.org/10.1115/1.1372705
  25. Lee, J. S. and Cha, S. W., 2001, 'Axiomatic Approach for the Design of Reducing the Noise and Vibration of CD-ROM Drive,' Spring Conference of KSNVE, pp. 504-509
  26. Lee, K. W. and Park, G. J., 2000, 'A Structural Optimization Methodology Using the Independence Axiom,' Transaction of the KSME, A, Vol. 24, No. 10, pp. 2438-2450
  27. Song, Y. S., Yang, Y. S. and Jang, B. S., 1999, 'Application of Design Axiom to Marine Design Problems,' Journal of the Society of Naval Architects of Korea, Vol. 36, No.3, pp. 107-114
  28. Park, G. J., Do, S. H. and Suh, Nam P, 1999, 'Design and Extension of Software System Using the Axiomatic Design Framework,' Transaction of the KSME, A, Vol. 23, No.9, pp. 1536-1549